Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Mansfield
Gate installation in Mansfield runs between $2,800 and $9,500 for most residential jobs, depending on whether you need a single swing gate, a double driveway gate, or a custom ornamental iron build with an automated operator. We’re Gatewood Fence & Gate, and we’ve been handling Mansfield’s gate work long enough to know exactly what the soil, the heat, and the housing stock demand. When you call (817) 241-4067, a live person answers - not a recording - and we’ll schedule a free on-site measure and a written price before any work begins.
Why Gatewood Fence & Gate Is Mansfield’s Preferred Gate Installation Company
Hal Gatewood started this company in 2001 and still answers the phone. That matters in Mansfield, where a lot of homeowners have been burned by a national outfit that quoted one number on the phone and showed up with another. Hal’s name is on the shop, his address is published, and his license number is there for anyone to look up. We don’t hide behind a dispatch queue.
Mansfield homeowners call us because we know the difference between a gate that needs a new operator and a gate that needs its post reset in Blackland Prairie clay. The person who shows up is background-checked, uniformed, and trained to work on nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If you want to look Hal in the eye before you hand over a deposit, drive to the shop. The name is on the building, and the building is down the road - that is the oldest accountability there is.
Our Gate Installation team handles everything from a single pedestrian gate on a quarter-acre lot to a custom double swing gate with underground operators. And every job, no exceptions, carries our 90-Day Done Right Promise in writing: if it’s not done right, one call brings Hal back. No runaround.
Our Gate Installation Services in Mansfield
Swing Gate Installation in Mansfield
Swing gates remain the most common choice across Mansfield’s subdivisions, from Walnut Creek Valley to the neighborhoods off Matlock Road and Broad Street. We install them with deeper concrete footings than most national crews will bother with, because we know the clay under Mansfield swells and contracts with every rain-and-drought cycle. A swing gate needs a post set for this soil, or it will bind against the frame within a few seasons.
Double Gate Installation in Mansfield
A double gate on a Mansfield driveway means two leaves, two pivot points, and twice the opportunity for a bad install to show itself. We match both leaves to the operator’s capacity, set both posts in deep concrete with proper drainage, and tune the closing speed so the leaves meet square without slamming. On larger lots - a full acre or more - this is the standard upgrade we install most often.
Security Gate Installation in Mansfield
Security gates in Mansfield are not a luxury add-on. For a lot of homes built between 1995 and 2015, the ornamental iron driveway gate is the first line of defense and the first thing a visitor sees. We install security gates with matched entry hardware, keypad or intercom integration, and entrapment protection built in from day one. If you are backing up to a busy corridor or you just want the driveway to close behind you every time, we will build for that.
Pedestrian Gate Installation in Mansfield
Pedestrian gates get ignored until the latch stops catching or the frame starts dragging. We install walk gates that swing true and latch square, from simple wood-panel gates to ornamental iron matched to an existing driveway gate. The same soil rules apply: if the post walks, the gate will not stay square. So we set pedestrian gate posts the same way we set driveway gate posts, with footing depth tied to Mansfield’s clay movement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Mansfield
We service and install FAAC, BFT, Linear, and Viking operators regularly on Mansfield gates, along with several other major brands. We stock common parts locally for these systems, which means a Mansfield repair does not have to wait on a distributor two states away. If you already have an operator you like, we can retrofit a new one to your existing gate and keep the keypads, remotes, and loop detectors working together.
Common Gate Installation Problems We See in Mansfield Homes
- Clay soil heave tilting hinge posts: Mansfield sits on Blackland Prairie clay that swells after rain and cracks in drought. Posts set in shallow footings walk out of plumb, and the gate starts binding against the frame even when the hardware is new.
- Underground operator seal and battery failure from 100°F heat: North Texas summers cook underground operator housings. Seals dry out, batteries fail early, and wiring insulation degrades faster than the manufacturer’s rating assumes. We install with heat-rated components and service loops built for this climate.
- Double gates losing alignment at the center: A sagging double gate usually means a hinge post moving, not a leaf bending. Fix the panel without the post and you will fix it again in two years. We start at the post every time.
- New installs on dense subdivisions with undersized footings: Builders put in a gate, not a post that will last. We see five-year-old installs around Mansfield’s newer subdivisions already sagging because the footing was never deep enough for this soil. We set posts for the ground they sit in, not the ground a spec sheet assumes.
Pricing for Gate Installation in Mansfield, TX
A single swing gate with a basic operator in Mansfield typically runs $2,800 to $4,200. A double driveway gate with automated operators and safety photocells lands between $4,500 and $7,800. Custom ornamental iron work, underground operators, matched intercom or camera entry, and security gate builds on larger properties run $6,500 to $15,000 and up, depending on span, weight, and finish. We quote the job at your property, in writing, and that price does not change at the door. We also honor standing offers that do not require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a free estimate on your Mansfield gate.
We Also Serve Cities Near Mansfield
Our crews work across Mansfield and the surrounding communities daily. If you are in Arlington, Kennedale, Duncanville, or Grand Prairie, the same people who handle Mansfield’s gate work will handle yours - same phone number, same 90-Day Done Right Promise, same live person on the line.
Serving Mansfield, TX - Our Local Coverage Area
We’re based in the Mansfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Mansfield
It is not a coincidence. Mansfield’s residential buildout ran hard from the mid-1990s through the 2010s, and a huge share of those homes got ornamental iron driveway gates with automated operators installed at the same time. Those gates and their operators are now hitting the 15-to-25-year end-of-life mark all at once - which is why you see so many Mansfield gates sagging, slow-moving, or dead on their operators in the same season. It is a repair surge specific to Mansfield’s development timeline, and it is why a lot of our installation work starts as a remediation job. Call (817) 241-4067 for an exact quote on your gate - estimates are free.
Mansfield’s clay swells after rain and cracks in drought, which means a gate post set in a shallow footing will heave, tilt, and bind the gate against its frame over time. We set posts in deeper concrete footings with drainage provisions built for this soil, so the post stays stable through the wet-dry cycles that define North Texas weather. Skip that step and you’ll be paying for a sag correction before the gate’s fifth birthday. Call us at (817) 241-4067 and we’ll spec the footing for the ground you actually have.
Yes. We routinely install FAAC, BFT, Linear, and Viking operators on existing Mansfield double gates. We match the operator’s capacity to the actual weight and span of your leaves, integrate your existing keypads and remotes where possible, and install the entrapment protection every automated gate must have. On one custom wrought-iron double swing gate in Walnut Creek Valley off Matlock Road, our crew found the original 2005 LiftMaster linear actuator burned out and the hinge post heaved two inches out of plumb by Blackland Prairie clay. We reset the post with a deeper concrete footing, hung the gate with corrected sag, installed a new FAAC ram-driven operator with matched safety photocells, and tuned the loop detector. That gate now swings silently and latches square, with the post stable through the next rain cycle.
It is almost always the post. Mansfield’s clay swells when it gets wet, and a swollen footing walks the post out of plumb - the gate then binds or scrapes even though the iron itself is straight. A gate sags in the hinge post, not in the middle, and that is where we start. We reset the post, correct the gate’s hang, and set the footing deeper so the next rain cycle does not repeat the problem. Call (817) 241-4067 and we’ll tell you honestly which one you’re dealing with.
Yes. Under the current UL 325 standard, every automated gate must have entrapment protection - photo eyes, contact edges, or both - and a properly monitored reversing system. We install entrapment protection on every new gate and retrofit it on existing gates that are missing or bypassed. It is not a city-specific rule as much as an industry standard we will not skip, and it is part of every install quote we write. For a free on-site review of your gate’s safety setup, call (817) 241-4067.
Contact Gatewood Fence & Gate for Gate Installation in Mansfield
If you are in Mansfield and your gate needs a post reset, a new operator, or a full installation done right the first time, call Hal’s crew at (817) 241-4067. We answer live, 24/7. You’ll get a straight answer, a free on-site measure, and a written price before any work starts. Hal Gatewood has been at this since 2001, and his name is on the shop. If you want to talk to the person who will actually show up, you can. The phone is right there.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Mansfield and surrounding communities since 2001.