Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Rendon
Gate installation in Rendon isn’t a one-size-fits-all job. Most properties here sit on 1 to 5 acres, and that changes everything about how a gate gets built, anchored, and wired. You’ll see a custom ornamental iron driveway gate on one side of the parcel and a pipe-and-wire ranch gate on the other, sometimes within a hundred feet of each other. Both need to work, both need to hold up to Blackland Prairie clay movement, and both need someone who understands the difference. That’s us. Call (817) 241-4067 and you’ll reach a live person who knows Rendon roads and Rendon soil.
Why Gatewood Fence & Gate Is Rendon’s Go-To for Gate Installation
Hal Gatewood started this company in 2001, and his name is on the shop. That’s not a slogan. When you hire us for a gate install in Rendon, the person quoting your job is the same person accountable for how that gate runs a year from now, and the same person you can find at the shop if something isn’t right.
Rendon customers call us for one reason more than any other: they’ve had a gate put in by someone who didn’t understand this area’s soil. Blackland Prairie clay moves. It shrinks in a 105-degree August and swells after a hard spring rain. A post set shallow will lean within one season. We set posts below the active clay line, on concrete footings sized for the gate’s weight, not just for what’s cheap. That’s the difference between a gate that operates quietly for ten years and a gate that binds at month six.
The Gate Installation team works from a metro office in Dallas-Fort Worth, but the crews serving Rendon are local to the area. We answer calls around the clock with a real person, not a recording. Every job, including yours, carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings Hal back. No runaround.
There’s also a no-trip-charge policy inside Tarrant County, a $40 discount on any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Upfront pricing is the rule. You’ll know the number before we start, and that number won’t change at the door.
Key Takeaways
- Rendon’s 1-5 acre lots often need two gate types on the same property: a driveway gate and a ranch/livestock gate.
- Blackland Prairie clay movement is the #1 cause of gate post failure here, so depth and footing matter.
- Every job carries the 90-Day Done Right Promise, in writing.
- Upfront pricing, no trip charge inside the county, and a live person answers 24/7 at (817) 241-4067.
Our Gate Installation Services in Rendon
Driveway Gate Installation
A driveway gate in Rendon is usually the first thing a visitor sees from the county road. On large-lot properties off Rendon Road, Burleson-Retta Road, or along FM 1187, that gate is often a custom ornamental iron double gate on an automated opener. We build for the weight. Heavy iron means heavier posts, deeper footings, and operator arms sized for the load. That’s not optional here, especially on clay that shifts with every drought-to-rain cycle.
Pedestrian Gate Installation
We install matching pedestrian gates beside the main driveway gate, so no one has to squeeze past a 16-foot panel or trip the auto opener every time they check the mail. In Rendon, where the main gate may be a hundred feet from the house, a walk gate saves real time and wear on the operator. It also gets built to the same standard: square in the frame, hung on a hinge that won’t sag into the latch within a year.
Sliding Gate Installation
Some Rendon driveways are tight on swing room or run uphill from the road, and a sliding gate makes sense there. The big thing with sliders is a level track and rollers that shed gravel clean. Out here, crushed granite and native clay find their way into everything. We install steel V-track with proper drainage slope and keep the roller carriage accessible for cleaning. Underground operators are our preference for high-end custom properties where a visible motor box would cheapen the entrance.
Swing Gate Installation
Double swing gates are common on Rendon’s acreage lots because they handle wide driveways and heavy iron better than a single panel. But a 16-foot double swing gate on a LiftMaster or FAAC operator puts real stress on hinge posts. We set hinge posts in concrete piers that extend below the clay shrink line. Then we anchor the operator to a post that won’t move on its own. Two posts, two jobs, both done right. That’s what keeps a heavy gate running silently for years.
Security Gate Installation
For custom homes in newer large-lot subdivisions and older ranch properties around the south side of Rendon Road, security is the point of the gate. We install keypads, intercoms, cameras, and safety photocells that tie into the gate operator cleanly. You should be able to open from the house, see who’s at the road, and know the gate won’t close on a car or a kid. That’s entrapment protection, and it’s part of the install, not an add-on.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Rendon
We stock parts and service boards for LiftMaster, Elite, and Mighty Mule, plus several others, so a failed control board doesn’t mean waiting two weeks on a distributor. For Rendon acreage with no power at the gate, we lean on LiftMaster and FAAC solar-ready openers, matched to the gate’s weight and swing direction. When a custom ornamental iron gate shows up on a rural property, the brand matters less than the install. A good opener on bad footings still fails. We build the footing first and the brand second.
Common Gate Installation Problems We See in Rendon Homes
- Post heave from clay movement. Blackland Prairie soil shrinks in summer and swells after rain. A shallow-set post leans within a single weather cycle, throwing hinges out of square and binding the gate.
- Retrofitted openers on weak cedar posts. Along older county roads south of Rendon Road, many automated gate systems were bolted onto original treated-pine posts set shallow. The post shifts, the operator arm stays put, and the mounting hardware shears.
- Ice storm damage to boards and battery backups. The February 2021 freeze killed plenty of gate control boards across Tarrant County. On custom entry gates, that means a board-level replacement coordinated with the install electronics, not just a reset.
- Mismatched gate types on the same parcel. A 16-foot ornamental iron driveway gate needs different geometry than a 10-foot pipe-and-wire ranch gate. When the same installer treats both the same, one of them sags. We spec each gate separately.
Pricing for Gate Installation in Rendon, TX
Here are real ranges for Rendon, not the inflated numbers you see from faceless websites. A single ornamental iron driveway gate on a basic manual hinge typically runs $1,800-$3,200 installed. An automated double swing gate with a LiftMaster or FAAC opener lands between $4,200-$8,500, depending on the gate’s weight, whether underground operators are used, and how far the power run stretches. Pedestrian gates are usually $400-$1,200. Sliding gate installs start around $3,500 and climb with automation and track length.
What moves the price: the gate’s material and weight, post footage depth, whether solar is required, and the entry system you choose. You’ll get a written quote before any work starts. Call (817) 241-4067 and we’ll come out, measure, and give you a number that won’t change. Estimates are free.
We Also Serve Cities Near Rendon
Rendon is our focus, but we regularly install gates in Arlington, Fort Worth, Colleyville, and Irving. If you’re in a bordering city and want the same level of attention to clay soil and heavy gates, call the same number. Learn more about our work across the region on the Rendon page.
Serving Rendon, TX - Our Local Coverage Area
We’re based in the Rendon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Rendon
On Rendon acreage, hinge posts for a driveway gate should be set at least 36 inches deep, and on a heavy double swing gate we go 42-48 inches with a concrete pier footing that extends below the active clay line. That depth gets the post below the zone where soil volume swings with drought and rain, so the hinge stays square instead of climbing or leaning with the season. Call (817) 241-4067 for a free site walk and a post-depth spec for your gate’s exact weight and placement.
Sometimes, but not if those cedar posts are shallow-set and already moving with the clay. We’ve retrofitted openers onto solid, deep-set cedar posts on Rendon properties without pulling them. But when a post shifts even a quarter inch with the operator arm anchored to it, the mounting hardware shears and you’ll be back where you started in one wet spring. We’ll tell you honestly whether your existing posts are keepers or need re-setting.
A new automated gate in Tarrant County must meet UL 325 safety standards, which means entrapment protection: at minimum, a primary two-sensor obstruction detection system, plus safety photocells or contact edges on gates with pinch points, and a clearly rated operator matched to the gate’s usage class. We install whichever protection your gate configuration requires and verify it before the system goes live. That’s not optional on a Rendon job; it’s code.
Yes, and on Rendon acreage this comes up constantly. Many gates sit at the far end of a long driveway with no power at the post. We install LiftMaster or FAAC solar gate openers with battery backup and panel kits sized to the opener’s draw, so the gate runs through cloudy weeks and the occasional North Texas freeze. The panel mounts independently of the gate post, which is cleaner than it sounds and more reliable than the alternatives.
Yes, eventually. Even with a deep-set hinge post, a heavy ornamental iron gate on Rendon clay will settle and work over the course of several drought-to-rain cycles. That’s not a defect; it’s physics. We build a slight upward camber into long gate panels and leave the hinge assembly adjustability for sag correction without pulling the post. When you need adjustment, one call brings us back, and the 90-Day Done Right Promise covers any install mistake at our cost.
Ready to Talk About Your Gate in Rendon?
If you’re on a lot off Rendon Road, FM 1187, or one of the older county roads south of town, we’ve likely passed your property and noticed the gate. That’s the kind of familiarity that matters when your hinge posts are 40 inches deep in clay and your opener is a LiftMaster solar rig tied to a keypad at the road. Call (817) 241-4067 for a free estimate. No pressure, no price that changes at the door, just an honest look at what your gate needs and what it’ll cost. The name is on the shop.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Rendon since 2001.