Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterDoorKing Gate Repair in Fort Worth, TX | Gatewood Fence & Gate
We repair DoorKing gate operators all over Fort Worth, from HOA entrance gates in Walsh Ranch to slide gates on horse properties west of Loop 820, through our Fort Worth Gate Repair service. The thing that makes our DoorKing work here different is the Blackland Prairie clay under your posts. It moves. Season after season. And a DoorKing operator that’s slightly out of alignment trips sensors, burns boards, and leaves your gate stuck open at 2 a.m.
Hal Gatewood has been fixing gates around this part of Texas since 2001, and we’ve seen more DoorKing 9150s and 6500s fail from shifting posts than from bad motors. We’re an independent DoorKing service provider, not manufacturer-affiliated, which means we fix what’s actually broken instead of selling you a new operator because it’s easier for us. Call (817) 241-4067 and a live person picks up, day or night.
Why Fort Worth Residents Choose Us for DoorKing Service
Most gate companies in Fort Worth can swap a battery and call it a day. DoorKing operators are different. They have specific logic boards, specific loop detector settings, and specific entrapment sensor tolerances that generic techs get wrong. We don’t. Our crew works on DoorKing equipment every week, and we keep OEM circuit boards, loop detectors, and motor capacitors on the truck or at the shop.
Hal took welding and metal fabrication at Tarrant County College before he ever opened a gate opener for a paying customer. That matters because half the DoorKing repairs in Fort Worth aren’t really operator problems. They’re post problems, hinge problems, or alignment problems that got ignored until the motor gave up. We fix the whole assembly, not just the part that finally quit.
We’re locally owned and owner-operated. Hal’s name is on the shop, his address is published, and if you want to talk to the person who’s actually going to show up, you can. No call center, no voicemail maze. Just Fort Worth service area coverage from a company that’s been here since before Walsh Ranch had its first gate.
Common DoorKing Gate Repair Problems We Solve in Fort Worth
- DoorKing 6500 swing gates thrown out of alignment by clay heave. The Blackland Prairie clay expands hard after spring rain and shrinks hard in summer drought. Posts lean a half inch, then an inch and a half, and the operator arm binds until the entrapment sensor trips and the gate reverses or locks up. We realign the post and re-set the operator, not just the arm.
- DoorKing 9150 slide gate motors seized after a freeze-thaw cycle. A rain-soaked day in January drops below 20°F at night, condensation inside the motor housing freezes, and the next morning the gate won’t budge. We open the housing, dry the motor properly, check the capacitor, and usually save the operator.
- DoorKing 6100 swing gates binding in 100°F summer heat. Metal expands when Fort Worth sits above 100°F for two weeks straight. Hinges that were fine in April suddenly bind, and the current-sensing limiter shuts the gate down mid-cycle to protect the motor. We re-gap the hinges and adjust the limiter so the gate handles the heat.
- DoorKing 1000 series chain and sprocket wear in older neighborhoods. Fairmount and Ryan Place have beautiful old houses and often, some seriously rusted gate hardware. Humidity and occasional flooding near the Trinity weaken chains and sprockets until the gate jerks and chatters. We stock sealed bearing rollers and aftermarket chains that outlast the originals.
- Keypad and loop detector failures after soil shift. The loop detector buried in your driveway doesn’t care about the weather, but it cares when the clay around it moves. Spring rains shift the ground, the detector’s signal degrades, and your keypad code stops opening the gate reliably. We re-set the detector and re-tune the operator.
DoorKing Service in Fort Worth: What Local Conditions Mean for Your Equipment
Here’s something you won’t find in a DoorKing manual or on a Dallas gate company’s website. Fort Worth’s eastern subdivisions like Walsh Ranch and Chapel Creek have HOA rules that require automated entrance gates to be operational within 24 hours of failure. But many of those gates sit on the same Blackland Prairie clay that shifts posts by up to two inches between spring and summer. So the realignment work we do out there isn’t a one-time fix. It’s a seasonal recalibration.
The clay absorbs water and swells, pushing posts outward and tilting operator mounts. Then summer hits, the clay dries, and everything settles back, but never quite where it was. A DoorKing 9150 bolted to a post that’s drifted an inch and a quarter will run its chain at a slight angle, wear the sprocket unevenly, and eventually trip the entrapment sensor. Dallas competitors don’t deal with this because their soil is sandier and doesn’t heave the same way. We see it every spring in Fort Worth.
DoorKing Models & Products We Service in Fort Worth
We handle Gate Installation in Fort Worth and service the DoorKing models you’ll actually find across Fort Worth and the surrounding counties. The DoorKing 9150 Commercial Slide Gate Operator on HOA entrances and apartment complexes. The DoorKing 6500 Vehicular Swing Gate Operator on residential driveway gates in neighborhoods like Chapel Creek. The DoorKing 6100 Vehicular Swing Gate Operator on smaller single-family gates. And the DoorKing 1000 Series Residential Slide Gate Operator on older slide gates around Fairmount, Ryan Place, and the west side.
For critical safety and logic parts, we use DoorKing OEM circuit boards, loop detectors, and motor capacitors. For wear items like steel rollers, chains, and weather seals, we use proven aftermarket parts that cost less and last longer. We keep the common parts stocked locally so we’re not waiting on a shipment from California while your gate sits broken. And for operators 12 to 15 years old with multiple failing boards or a badly rusted frame, we’ll give you a straight repair-versus-replace estimate before any work starts. You decide, not us. That’s how we handle DoorKing sales & service across the metro.
DoorKing Service Pricing in Fort Worth
DoorKing repair in Fort Worth typically runs $180 to $340 for common fixes like sensor adjustment, loop detector re-tuning, or a capacitor replacement. Chain and sprocket replacement usually lands between $250 and $600 depending on gate length and how much rust we’re fighting. A full circuit board replacement starts around $350 and goes up from there if multiple boards have failed. Motor replacement on a swing gate operator generally runs $400 to $800.
What drives the cost? Whether the post has shifted, how much corrosion has built up, and whether the gate’s alignment is still workable. Every estimate is free, and the price we quote is the price you pay. Before any work starts, you’ll have the number written down. We also take $40 off any repair over $200, and seniors and veterans get 10% off permanently. Call (817) 241-4067 and we’ll give you a straight number.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - DoorKing Gate Repair in Fort Worth
It’s the clay. The Blackland Prairie soil under your gate post soaks up rain and swells, which pushes the post over just enough to pull the gate off its track or misalign the operator arm. The fix is re-setting the post with a deeper footing and re-tuning the operator, not just nudging the gate back. Call (817) 241-4067 and we’ll check the post before the next storm.
Yes. We regularly connect DoorKing 9150 boards to existing telephone entry and keypad systems in Fort Worth HOAs, including Walsh Ranch and Chapel Creek. We’ll verify the board’s relay settings and wiring so the operator opens on the system’s signal without interference. Free estimate, quoted before work begins.
The heat is expanding the gate and binding the hinges, so the operator’s current-sensing limiter shuts the motor down to protect itself. The motor is fine in most cases. We re-gap the hinges, realign the gate, and reset the limiter so the operator handles the 100°F stretches we get every August. Call (817) 241-4067 and we’ll come look.
We keep DoorKing OEM circuit boards, loop detectors, and motor capacitors at our shop and on our trucks. For most Fort Worth repairs, we have the part on hand the same day. If it’s an unusual board we don’t stock, we’ll tell you the lead time before you commit to anything.
Usually yes, if the frame and motor are still sound. We’d rather replace a $40 roller and re-tune the sensor than sell you a $2,000 operator you don’t need. But when the operator is over 12 years old with multiple failing boards, an honest repair-vs-replace estimate is the right call. We’ll show you the numbers, no pressure. Call (817) 241-4067 for a free second opinion on any written estimate, too.
Service Areas Near Fort Worth
We work all over Fort Worth and the surrounding communities. That includes DoorKing service in Colleyville for HOA and residential gates, DoorKing service in Arlington where Hal first started fixing gates, plus Kennedale, Grand Prairie, and the western corridors toward Aledo and Benbrook. If you’re within Tarrant County, there’s no trip charge. Just call.
Book Your DoorKing Service in Fort Worth Today
Your gate is broken and it’s not going to fix itself. Call (817) 241-4067 and you’ll get a live person, a straight answer, and a free estimate with the price in writing before any work starts. Just give me a call - I’ll pick up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.