Linear Gate Access Control Nationwide | Gatewood Fence & Gate

Linear Gate Access Control in Arlington: What to Know First

Linear gate access control in Arlington comes down to one question for most homeowners: can the opener from 2012 work with the phone system you bought last year? We’re an independent Linear service provider, and we’ve been answering that question since 2001. Typical turnaround on a Linear access control job in Arlington is same-day for most keypad and remote issues, and one to three days when we need to order a board or a receiver. The price is quoted and agreed before any work starts, and the estimate is free. If your Linear gate opener is acting up, call (817) 241-4067 and a real person picks up, 24/7.

Call (817) 241-4067

This page is for Arlington homeowners who already own a Linear gate system and need the access side fixed, added to, or brought into this decade. You don’t need a new gate. You probably don’t need a new opener. You need a guy who has seen the inside of a Linear control board enough times to know what fails and why.

How Linear Products Fail - and How We Fix Them

Linear openers have their own personality. Some of it’s good, some of it’s predictable. Here’s what shows up on Arlington driveways, series by series:

• Linear LDO series (the old blue-label boards, LDO50 and LDO33): The most common failure we see is the receiver going deaf. The opener powers the arm fine, but the remote won’t trip it from the street. That’s usually a failed receiver module on the control board, not the remote. We replace the module or wire in a standalone receiver, which runs about a third of the cost of a new board.
• Linear MegaCode (MCT-3, MCT-11 keypads and remotes): MegaCode encryption is strong, but the keypad housings are not. Arlington sun bakes the plastic until the face cracks, then humidity gets inside the keypad and shorts the membrane. We’ve replaced dozens of cracked MCT-3 keypads. The fix is a new keypad and a little bead of dielectric grease where the gasket sits.
• Linear APeX series: These are heavier-duty commercial-grade units. When an APeX opener misbehaves, nine times out of ten it’s the limit switch wiring, not the board. The vibration from the gate moving loosens the spade terminals. We clean, re-crimp, and apply a little no-ox compound before we ever talk about a new circuit board.
• Linear access control add-ons (AE-100, AE-500 telephone entry, AM-KP keypads): The AE-100 telephone entry box more often than not gets fried by a power surge because the original installer skipped the surge suppressor. Arlington storms are quick and mean. We install grounded surge protection on every Linear access box we touch, whether we’re repairing it or not.
• Frequency drift on older 300 MHz Linear units: It’s rare but real, especially on units that sat through long Arlington summers mounted to a south-facing brick pillar. The crystal oscillator drifts slightly off frequency, and range drops from 100 feet to 10 feet. We can’t trim the crystal, so we’ll swap in a new receiver or a matched remote set if it’s viable for your panel.

If you’re noticing a model we didn’t list, call anyway. Linear made a lot of variants, and the nameplate you can’t read through the rust is usually the one we know by the shape of the panel.

Our Linear Gate Access Control Process

Here’s what actually happens when you call us about a Linear access problem in Arlington:

1. 1
   You call (817) 241-4067. A live person answers. Not a voicemail, not a queue. We ask what the gate is doing, what the keypad shows, and whether the remote still opens it from the driver’s seat. That tells us half the story before we get in the truck.
2. 2
   We show up in the window we gave you. We check the opener, the keypad, the photo eyes, the wiring at the hinge post, and the gate itself. Linear boards are usually fine. It’s the wiring and the devices hanging off them that cause most of the grief.
3. 3
   We price the job on the spot. Parts, labor, everything. You agree to the number before any work starts. If it’s a repair over $200, we take $40 off. If you have a written estimate from anybody else, we’ll give you a free second opinion before you spend a dime.
4. 4
   We fix it in your driveway. We stock Linear receiver modules, limit switches, keypads, and remotes on the truck. If we need a board, we source it OEM or a known-good aftermarket part, and we order it that day. No hauling your gate away.
5. 5
   We test the whole system, not just the part we touched. We cycle the gate, test every remote and keypad code, check the auto-close and obstacle reversal, and watch it run a few times from the street. If it fails two weeks later, you call, we come back.
6. 6
   We clean up and write it down. You get the 90-Day Done Right Promise in writing on your invoice. If it’s not done right, we make it right. That’s the whole sentence.

What Linear Gate Access Control Costs in Arlington

Most of the Linear access control work we do in Arlington falls into a predictable range. A cracked MCT-3 keypad replacement runs about $120 to $190 installed. A standalone receiver wired into an older blue-label board runs $140 to $240. A full access control retrofit with a new keypad, remote set, and surge protection usually lands between $350 and $700 depending on how much wiring needs to be pulled.

• Keypad replacement: $120 to $190 installed
• Standalone receiver install: $140 to $240 installed
• Full access retrofit (keypad, remote, surge): $350 to $700 installed
• Telephone entry repair or replacement: $400 to $900 depending on the panel

What moves the price: how far the gate is from your power source, how many devices are wired into the board, and whether the conduit is still intact or we’re laying new wire. The quote is always on the table before work starts, so you can look at it with your glasses on. Call (817) 241-4067 for an exact price. The estimate is free, inside the county.

Why Arlington Homeowners Call Gatewood Fence & Gate for Linear Work

Hal Gatewood has been fixing gates around Arlington since 2001, and his name is on the shop and on every invoice. That’s the oldest accountability there is. We’re not a franchise, and we don’t want to replace your Linear system just because it has a few years on it. We’ll repair what’s repairable and tell you honestly when it’s not.

We also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your Linear opener is too far gone, we’ll give you straight advice about what to put in its place, with no brand loyalty except to the thing that works. Every job carries the 90-Day Done Right Promise in writing. Calls are answered by a live person, 24/7. And we don’t charge a trip charge inside the county. Just give me a call - I’ll pick up.

FAQs