Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterElite Gate Repair in Arlington: What to Know First
Elite gate repair in Arlington typically runs $180 to $340 for common fixes like hinge realignment or limit switch replacement, and most jobs are done the same day we look at the gate. We’re an independent Elite service provider, which means we repair the opener and the gate itself without being tied to factory parts pricing or extended wait times. If you own an Elite SL3000, Elite CSW200, or an older Elite swing gate that’s stopped responding, give Hal a call at (817) 241-4067. We’ve been welding, straightening, and retuning Elite gates around Arlington since 2001, and we’ll tell you over the phone whether it sounds like a $40 limit switch or something worth a closer look.
How Elite Products Fail - and How We Fix Them
Elite gates are solid machines, but every brand has its weak points. Here’s what we see most often on Elite gates in Arlington driveways and what we do about it.
- Elite SL3000 slide gate chain tension drift. The SL3000 uses a chain-drive system, and in Arlington’s clay-heavy soil, the gate posts shift a fraction every year. That shift loosens the chain until the gate jerks or stops mid-travel. We realign the posts, reset the chain tension to factory spec, and check the sprockets for uneven wear. It’s a two-hour fix, not a new opener.
- Elite CSW200 limit switch fatigue. The CSW200 is one of the most common Elite swing gate openers we service in Arlington, and its mechanical limit switches are usually the first thing to go. The gate opens too far, slams the stop, or reverses before it should. We replace the switches with quality aftermarket parts that cost about half what the OEM version runs and hold up the same. You don’t need a new opener for a $40 switch.
- Elite Miracle-One photo eye failures in the heat. Older Elite Miracle One units came with photo eyes that bake in the Texas sun. The lens clouds and the sensor starts throwing false obstruction faults, so the gate refuses to close or reverses halfway. We clean or replace the eye, then test it in direct afternoon sun. That’s a problem a software update won’t fix.
- Elite swing gate hinge post sag. This isn’t an Elite-specific flaw, but we see it on Elite swing gates more often because they tend to be heavier than average. The gate sags in the hinge post, not in the middle, and that’s where we start. We unbolt the leaves, repair the post, rehang the gate, and tack-weld the hinge bolts so they don’t loosen again. Fix the panel without the post and you’ll fix it twice.
- Elite actuator arm fatigue on swing models. The threaded actuator arm on older Elite swing openers develops play over time, especially on gates that get cycled 20 times a day. The gate jerks at the start of travel or makes a popping noise. We rebuild the arm, grease the joints, and check the motor’s amp draw to make sure the strain didn’t damage the gearbox.
These are the patterns Hal has seen on hundreds of Elite gates around Arlington. The fix is usually more straightforward than the gate’s behavior suggests. Show me a gate closing on its own and I’ll show you where it’s failing.
Our Elite Gate Repair Process
Every Elite job follows the same honest sequence, whether it’s a limping SL3000 or a CSW200 that won’t budge.
- 1
You call, we listen. The phone rings and a live person answers, 24/7. We’ll ask what the gate is doing, what brand it is, and when it started acting up. Hal often knows the problem from your description alone.
- 2
We show up and diagnose. We test the opener, the limits, the photo eyes, and the physical gate. We don’t guess. We use a clamp meter and a level, not a sales brochure.
- 3
Parts decision. If it needs a part, we tell you whether OEM or a quality aftermarket version makes more sense. We never push OEM when a $40 switch does the job perfectly well. We also never install anything that could void a remaining Elite warranty without telling you first.
- 4
The repair. We weld on site, so the gate stays in your driveway. We don’t haul it off, and we don’t swap parts that don’t need swapping.
- 5
Test with you watching. We cycle the gate a dozen times, block the photo eye to test the safety reverse, and check the force settings. If the gate hesitates, we tune it again.
- 6
Cleanup and the promise. We clean up the metal shavings, the old parts, and the grease. Then Hal hands you a written 90-Day Done Right Promise. If it’s not done right, one call brings him back.
The price is quoted and agreed before any work starts, so there’s no number that grows at the door.
What Elite Gate Repair Costs in Arlington
Here’s what we charge for common Elite repairs in Arlington. These are real numbers, not bait.
- Limit switch replacement: $85 to $140
- Photo eye cleaning or replacement: $55 to $120
- Hinge and post realignment: $180 to $300
- Gate re-weld (cracked hinge, broken picket): $100 to $250
- Chain tension reset and sprocket service: $120 to $220
- Full gate re-hang with post repair: $280 to $450
The main thing that moves the price is post condition and gate weight. A sagging post is a different day than a lazy limit switch. Every Elite repair gets a free estimate, no trip charge inside Tarrant County, and $40 off any repair over $200. Call (817) 241-4067 and we’ll give you a straight number over the phone before we even get in the truck.
Why Arlington Homeowners Call Gatewood Fence & Gate for Elite Work
Hal Gatewood has been fixing gates around Arlington since 2001, when he was driving a truck with a busted AC and figuring things out one broken hinge at a time. He grew up near the Pantego area on the southwest side of the city and took welding and metal fabrication courses at Tarrant County College before he ever touched a gate opener for a paying customer. There’s a published address and a license number anyone can look up, and the name on the shop is the same name on the invoice. We service nine major brands, including LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your Elite isn’t the right candidate for repair, we’ll tell you straight and show you the options. Every job is covered by the 90-Day Done Right Promise, and seniors and veterans get 10% off permanently. I will be there myself or you can drive to the shop and look me in the eye.
FAQs
Yes, but we’ll tell you the truth first: if your Elite opener is still under manufacturer warranty, the part itself may be covered, but the labor usually isn’t. We’ll diagnose it, document what we find, and advise you whether to file a claim or just let us fix it for less than the factory service call would cost. We never void a warranty by installing something the manufacturer would reject.
We use both, and the decision is always yours. For wear items like limit switches, photo eyes, and capacitors, we often recommend quality aftermarket parts because they cost 40 to 60 percent less and last the same. For control boards and gearboxes on newer Elite models, we’re more cautious; if OEM is the safer call for longevity and warranty, that’s what we’ll recommend. We show you the price difference before we order anything.
Repair is the better choice when the gate itself is structurally sound and the opener’s failure is mechanical, like a worn limit switch or a tired capacitor. Replacement makes more sense when the opener is 15 or more years old and the board, motor, and gearbox have all been patched at least once. We’ll give you a repair price and a replacement price and let you decide without a sales pitch.
Most Elite repairs we reach the same day or the next morning. If the gate is stuck open or stuck closed, we treat it like an emergency because a gate that won’t close is a security problem, not just an inconvenience. Call (817) 241-4067 and a live person will answer, any hour, and tell you when we can be there.
Yes. We weld on site, repair hinge posts, realign sagging gate panels, fix broken pickets, and handle the power and safety edges. We’re a fence and gate company first, not a remote control sales desk, so we work on the steel as much as the circuitry.
Call Gatewood Fence & Gate for Elite Gate Repair in Arlington
If your Elite gate is acting up and you want a straight answer, not a script, call (817) 241-4067. We’ll quote the repair before we start, show up in a truck with a welder and the right parts, and back the job with a written 90-Day Done Right Promise. No estimate games, no faceless crew, no number that grows at your door. The name is on the shop, and the shop is down the road. Just give me a call. I’ll pick up.
Written by Hal Gatewood, Owner, Gatewood Fence & Gate at Gatewood Fence & Gate, serving Arlington and nearby areas.