Driveway Gate in Arlington, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Driveway Gate Repair and Installation in Arlington, TX

A driveway gate in Arlington typically costs between $1,200 and $4,500 for standard repairs or minor retrofits, while full custom Gate Installation services can range from $3,500 to over $12,000 depending on the material, motor requirements, and site conditions. If your gate has stopped moving, is dragging on the concrete, or won’t respond to your remote, we can get it running again. Call (817) 241-4067 today for an honest assessment - we don’t believe in over-selling, and we offer free estimates on all work.

When you have a gate issue in Arlington, you need someone who understands the local soil and the specific hardware that lasts through our Texas summers. At Gatewood Fence & Gate, we’ve been fixing and installing gates since 2001. I’m Hal Gatewood, and my name is on the shop because I stand behind every weld and every bolt we install. Whether you are dealing with a sagging gate in a neighborhood like Dalworthington Gardens or needing a new motor for a property out near Lake Arlington, we show up when we say we will. We don’t use call centers or dispatch queues; a live person answers our phone 24/7. If you are looking for a long-term fix rather than a quick patch, you are in the right place. We also handle full Gate Installation in Arlington if your current system is beyond saving.

When You Need Driveway Gate Service

Gates in North Texas deal with a lot of stress. Between the extreme heat causing metal expansion and the shifting clay soil that moves your fence posts, it is common for even a well-built gate to need attention. Here are the signs that it is time to give us a call:

• The gate is dragging on the concrete: If you see a fresh scrape on your driveway, your hinge post has likely shifted or the hinges themselves have worn down. We fix this by re-aligning the post or welding the hinges, not just by adjusting the motor.
• The gate makes a grinding or popping noise: This usually points to a failing gear in the operator or a lack of grease. If you catch this early, we can often replace the gear assembly before the entire motor burns out.
• The gate opens or closes on its own: This is often a sign of a loose safety sensor or a wiring issue caused by moisture or pests. It is a security risk, and we treat it as a priority.
• The gate stops halfway: If your gate is hitting an obstruction sensor or struggling with resistance, it won’t finish the cycle. We check the track for debris and ensure the operator is calibrated to the correct force settings.
• The remote or keypad is unresponsive: Sometimes it is just a battery, but if the board isn’t communicating with the receiver, we can troubleshoot the signal or replace the unit with a reliable brand like FAAC or BFT.

If you see any of these issues, don’t wait for the gate to fail completely. A gate that is struggling puts extra strain on the motor, which turns a $200 repair into a $1,500 replacement. Call (817) 241-4067 to have me or one of my crew take a look.

Our Driveway Gate Process

I built this business on the idea that if you fix it right the first time, you won’t have to fix it again. We don’t haul your gate off to a warehouse unless absolutely necessary. We bring the shop to your driveway.

1. The Site Assessment: When we arrive, we don’t just look at the gate; we look at the post, the concrete, and the ground around it. A gate is only as strong as the post it hangs on. If the post is leaning, we address that foundation first.
2. Diagnostic Testing: We check the voltage, the safety sensors, and the limit switches. We use specific diagnostic tools to see if the problem is in the logic board or the mechanical drive system.
3. On-Site Welding and Repair: Most companies want to replace the whole gate assembly. We prefer to repair. If a hinge is broken or the frame is cracked, I will weld it right there in your driveway.
4. Calibration and Safety Check: Once the mechanical work is done, we calibrate the motor to ensure it stops exactly where it should. We test the safety reversal sensors multiple times to ensure the gate won’t close on a vehicle or a person.
5. The 90-Day Done Right Promise: Every job we do comes with this promise in writing. If it isn’t right, you call us, and we come back to fix it. That is the accountability you get when you hire a locally owned business.

We work with major brands like Linear and Viking, so we usually have the parts on the truck to get you moving the same day we arrive. If we have to order a specialized part, we will tell you upfront.

Driveway Gate Pricing in Arlington

I believe in upfront pricing. You will know what the job costs before we pick up a tool. We don’t have hidden trip charges if you are inside the county, and we are always happy to provide a free second opinion if you have another estimate that doesn’t look right.

Please note that these are estimates. Factors like the weight of the gate, the complexity of the existing wiring, and the availability of parts can shift the price. However, we have a few ways to keep costs down: we offer $40 off any repair over $200, and seniors and veterans always receive a permanent 10% discount on our services. Call (817) 241-4067 for an exact quote - estimates are free.

FAQs - Driveway Gate

How much does it cost to fix a sagging driveway gate?

Most sagging gate repairs range from $250 to $600, depending on whether we need to re-weld the hinges or install a new support post. A gate usually sags because the hinge post has moved or the weld has failed, so we focus on structural reinforcement rather than just adjusting the motor. Call (817) 241-4067 for a free estimate.

Is it cheaper to repair the gate or replace it?

In most cases, we can repair the gate for a fraction of the cost of a full replacement. We are a repair-first company, and my goal is to save you money by keeping your current gate functional as long as it is safe, though we also offer Pedestrian Gate installation if you’re looking to add one. We only recommend replacement if the frame is completely compromised or the motor is obsolete and parts are no longer available.

Can you come out today to look at my gate?

We do our best to accommodate emergency calls, especially when a gate is stuck in a position that blocks your access or creates a security risk. Since we are locally owned and owner-operated, we don’t have a corporate dispatch queue, so we can often get to you quickly. Call us now at (817) 241-4067 to see when we can get to your property.

Do you work on all gate motor brands?

We specialize in nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we have been in business since 2001, we have experience with both older legacy systems and the newer smart-enabled operators. If you have a specific brand, let us know when you call.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington.