Elite Gate Installation Nationwide | Gatewood Fence & Gate

Elite Gate Installation in Arlington: What to Know First

We install, service, and repair Elite gate systems across Arlington, and we do it as an independent Elite service provider - meaning we answer to you, not to a manufacturer’s warranty department. Most Elite gate installations in Arlington take one to two days once we’ve measured and ordered your system, and we’ll quote you a firm price before any material gets ordered. You won’t get a phone estimate that turns into a different number at the door. If you own an Elite gate in Arlington and it needs installation, replacement, or a second opinion, call us at (817) 241-4067 - Hal Gatewood picks up.

Call (817) 241-4067

This page is for Arlington homeowners who own Elite gates or openers and want installation work done right the first time. We cover driveway gates, pedestrian gates, sliding gates, swing gates, and double gates. We also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, so if your property has a mix of brands, one call covers all of it.

How Elite Products Fail - and How We Fix Them

Elite makes solid gate operators, but we see the same failure patterns repeat themselves across Arlington neighborhoods. Here’s what actually goes wrong, based on what we find when we pull the covers off:

• Elite SL-3000 and SL-3000 series sliding gate motors: limit switch drift. These are chain-driven slide operators that work hard in Arlington’s clay soil, where the gate track shifts slightly with every wet-dry cycle. When the limits drift, the gate stops short or over-travels and slams the end stop. We re-set the limits, then weld the end stops so they don’t keep walking. We also check the chain tension because a loose chain on an SL-3000 wears the drive sprocket faster than most owners realize.
• Elite gate opener control boards: blown relay from a power surge. Arlington gets real thunderstorms, and Elite boards don’t always forgive a surge the way newer LiftMaster boards do. We see SL and EL series boards come in dead after a storm. The fix is often a relay replacement, not a full board swap - which costs a lot less than the dealer will quote you. If the board is fried beyond a relay, we’ll tell you plainly and price a replacement.
• Elite heavy-duty swing openers (CSW and MSW lines): gear reduction failure from over-torque. When a swing gate is installed without enough clearance, or the hinge posts settle in Arlington’s shifting soil, the operator fights the gate every cycle. That burns out the internal gear set. On Elite swing installs, we spend extra time on hinge post footings and gate weight distribution before the operator ever gets bolted on. Fixing the post before the panel is what keeps the gears alive.
• Elite gate operator capacitor failures in extreme heat. Arlington summers sit above 95 degrees for weeks. Elite operators use capacitor-start motors, and heat kills capacitors faster than anything else. When a gate opens fine in the morning but stalls at 3 p.m., it’s almost always a heat-weakened capacitor. We keep common Elite capacitors on the truck and replace them on the spot - it’s not a gate that needs replacing, it’s a $40 part that does.
• Elite photo eye misalignment from gate panel sag. Elite safety eyes are mounted on the gate or the posts. When the gate panel sags at the hinge - which happens on a lot of Arlington double gates, especially ornamental iron ones - the photo eyes no longer align, and the gate refuses to close. We weld the hinge and realign the eyes. But we fix the hinge post first. Align the eyes without fixing the post, and you’ll be out there again after the next heavy rain.

Our Elite Gate Installation Process

Every Elite job we take on follows the same path, whether it’s a new driveway gate or replacing an old operator. Here’s how it works:

1. 1
   You call (817) 241-4067. A live person answers - always. We ask what the gate’s doing, what brand and model you can see on the plate, and when it started acting up.
2. 2
   We come look at it. No trip charge inside the county. We measure the gate, check the posts, and test the operator. We write down what we find, not what we think you want to hear.
3. 3
   We give you a written price before ordering anything. If your Elite operator is worth saving, we save it. If it’s not, we tell you why and show you both OEM and quality aftermarket options. We never swap a motor out of convenience when a relay or capacitor fixes it.
4. 4
   We do the work on site. Gate stays in your driveway. We weld on site, set posts if the job needs it, and run or reconnect the power run to code. If an Elite part has to be ordered, we tell you the real lead time and we stick to it.
5. 5
   We test it through every cycle it’ll see. Full open, full close, safety eyes, force settings, and the manual release. If it doesn’t close smoothly every time, we stay until it does.
6. 6
   You get the 90-Day Done Right Promise in writing. If it’s not right, we make it right. One call brings Hal back, no runaround.

What Elite Gate Installation Costs in Arlington

Elite gate installation prices in Arlington depend on what you have and what’s actually failed. Here’s a straight look at the numbers we quote most often:

• Elite operator replacement (motor only, existing gate): $850-$1,600 depending on slide vs. swing and whether it’s an SL, CSW, MSW, or EL series.
• Complete Elite slide gate system (operator, gate panel, posts, install): $3,200-$6,500 for a single driveway, more for a double gate or ornamental iron panel.
• Complete Elite swing gate system with double panels: $4,000-$8,200, with the wide range coming from gate material, post footings, and whether we’re dealing with Arlington’s clay expansion on the hinge side.
• Elite control board or relay replacement: $280-$520 parts and labor, depending on the model.
• Elite capacitor replacement: $75-$150, and it fixes more “dead gate” calls than most owners would believe.

What moves the price? Gate weight, post condition, power run distance, and whether you want OEM Elite parts or a quality aftermarket substitute. We’ll show you both numbers and let you decide. Every price is agreed in writing before work starts. Call (817) 241-4067 for a free estimate on your Elite gate installation in Arlington.

Why Arlington Homeowners Call Gatewood Fence & Gate for Elite Work

We’ve been fixing gates around Arlington since 2001, and Hal Gatewood’s name is on the shop and on every invoice. That’s the oldest accountability there is. When an Arlington homeowner calls us about an Elite gate, they get Hal’s crew - background-checked, uniformed people who have worked on Elite openers long enough to know which series has which quirk, and when to recommend a repair instead of a replacement. The person who shows up is the person you’ll see at the hardware store next week.

Every Elite job gets the 90-Day Done Right Promise in writing, not buried in fine print. Calls are answered by a live person around the clock, not a voicemail. And because we also service LiftMaster, Mighty Mule, Ghost Controls, and DoorKing, we can work on a mixed-brand property without two appointments or two invoices. You’ll get $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. We’d rather fix your Elite gate than replace it - but if it’s done, we’ll tell you that plainly, too.

FAQs