Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Colleyville, TX | Gatewood Fence & Gate
We provide independent Gate Repair in Colleyville for Ghost Controls systems, from control board replacement to full opener swaps. The one thing that makes our Ghost Controls work different here is this: we’ve seen the same failures repeat across the same subdivisions, because Colleyville’s 1995-2005 build wave put identical Ghost Controls AXP and TDS openers on hundreds of estate lots within a two-mile radius. That means we know what’s wrong before we even pull up. Call (817) 241-4067 and we’ll be there.
Why Colleyville Residents Choose Us for Ghost Controls Service
Hal Gatewood has been fixing gates around this part of Tarrant County since 2001, and Ghost Controls openers have been in his regular rotation the whole time. We work on AXP, TDS, DTP, and HDP units weekly across Colleyville, so we know the brand’s control boards, limit switches, and actuator failures without any manufacturer affiliation. That independence works in your favor: we’re not here to sell you a new opener because Ghost Controls told us to. We’re here to fix what’s actually broken. We carry OEM Ghost Controls parts when they make sense and proven aftermarket equivalents when they don’t. And if we can’t fix it in your driveway, we weld on site so the gate never leaves your property.
We’re the shop with the published address and license number, not a corporate fleet passing through. Hal’s name is on every invoice. Colleyville homeowners call us because they want to talk to a person who knows their gate, not a phone tree.
Common Ghost Controls Gate Repair Problems We Solve in Colleyville
- Control board overheating in pillar-mounted boxes. Colleyville summers hit 105°F, and many of these openers sit inside brick pillar boxes with zero ventilation. The Ghost Controls board cooks, and the gate starts running three seconds and stopping. We replace the board and add a passive vent so it doesn’t happen again by August.
- Limit switch drift from shifting clay. Tarrant County’s black clay heaves with every rain-drought cycle, which shifts the gate post just enough to throw off the limit settings. The gate stops partially open or slams shut against the stop. We reset the limits and check the post footing, because adjusting the switch without addressing the post means we’ll be back in six months.
- Actuator arm seal failure from dust intrusion. When summer dries out the soil, Colleyville’s estate lots kick up fine dust. That dust works into the actuator arm seal, the seal fails, and the motor burns out from grit. We replace the actuator and seal, and we’ll tell you if your particular lot needs a more protected mounting.
- Remote receiver desensitization from pinched antenna wire. Older brick pillar entries in Colleyville shift over time. When the frame pinches the antenna wire inside the pillar, the remote range drops until you’re standing five feet from the gate waving the clicker. We trace the wire, free the pinch point, and restore full range.
- Full opener assembly replacement on 15-to-20-year-old TDS and DTP units. When a Ghost Controls opener from the early 2000s has a bad board, a worn actuator, and limit switches that won’t hold, we’ll tell you straight: putting three new parts on a tired assembly is throwing money at a problem. A new opener is the cheaper fix at that point.
Ghost Controls Service in Colleyville: What Local Conditions Mean for Your Equipment
Here’s something a generic Ghost Controls page won’t tell you about Colleyville specifically. The subdivisions platted during the 1995-2005 luxury build wave (Waverly Park, Somerset, and others around the city’s central corridor) were developed by a small number of builders working in tight timeframes. That means entire streets, sometimes entire neighborhoods, received the same model Ghost Controls opener installed the same year. When a TDS2 boards start failing from heat or age, they don’t fail one at a time. They fail in clusters. Last August we ran three TDS2 control board replacements within the same week in Waverly Park, all from the same 2003 installation wave. A technician who stocks the AXP1 replacement board can clear a full day of calls within a two-mile radius in Colleyville and never see the same failure pattern in Hurst or Euless. That’s the advantage of working with a local shop that knows which models went into which streets.
Ghost Controls Models & Products We Service in Colleyville
We service the full Ghost Controls residential lineup: the AXP Series (AXP1, AXP2), TDS Series (TDS2, TDS3), DTP Series (DTP1, DTP2), and HDP Series (HDP2, HDP3). For parts, we use Ghost Controls OEM components when available, because boards and limit switches from the manufacturer guarantee exact fit and preserve any remaining warranty. When OEM lead times stretch out or a part is priced unreasonably, we install proven aftermarket boards and switches that hold up just as well. For Colleyville’s aging TDS and DTP fleet, we’ll give you a straight recommendation: if multiple components are failing on a 20-year-old assembly, we’ll quote our Gate Installation in Colleyville rather than stringing along board repairs. You get the numbers and you decide.
Our Colleyville service work includes Ghost Controls sales & service for every residential model line.
Ghost Controls Service Pricing in Colleyville
What Ghost Controls repair costs in Colleyville depends on what failed and how old the unit is. A control board replacement on a TDS or AXP unit runs roughly $300-$560. An actuator arm or seal replacement is typically $210-$380. A full opener assembly swap, job dependent, usually lands between $850 and $2,800 including hardware and labor. A service call to diagnose and reset limits or trace a wiring problem runs $95-$195, and we waive the trip charge inside the county.
You’ll get a written quote before any work starts, and the price we quote is the price you pay. We also have a 90-Day Done Right Promise on every job, in writing. And here’s the part nobody else puts in print: $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a free estimate, and we’ll quote it straight.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Colleyville
Heat and build-era uniformity. When a subdivision was built in a short window, the same openers age the same way at the same time. Add 105°F summers and unvented brick pillar boxes, and boards fail almost on schedule. If you live in Waverly Park or Somerset, we’ve probably already fixed a Ghost Controls unit on your street this month. Call (817) 241-4067 and we’ll confirm what’s failing on yours.
We usually can replace just the board, provided the actuator, gearbox, and limit switches are still sound. We won’t recommend a board swap if the rest of the assembly is worn to the point where you’ll be calling us again in a few months. For a TDS or DTP unit that’s 15 to 20 years old and failing in multiple places, the honest recommendation is often a full opener swap. We’ll show you the numbers for both options and let you decide.
It depends on how much the post moved. Colleyville’s black clay heaves dramatically, and a gate that’s gone out of alignment after a heavy rain usually means the post or footing shifted, not just the limit switches. Adjusting the switches might get the gate to close today, but the post will keep moving with the next rain. We’ll inspect the footing and tell you honestly whether it’s a limit adjustment or a post reset. If it’s the post, that’s where we start. The gate sags in the hinge post, not in the middle.
The HDP Series is built heavier than the entry-level line and handles heat and continuous use better. But even an HDP board will cook in an unvented brick pillar box when August hits 105°F. The opener matters less than the installation. We add ventilation to pillar-mounted units and use dust-resistant seal protection where drought conditions are worst. The model is only half the answer; how it’s mounted is the other half.
Yes, within reason. Ghost Controls openers accept external control inputs, and we can wire the opener to work with your existing intercom, keypad, or smart relay. We don’t sell or push any particular smart home system, but we’ll connect what you already have. If the wiring in your pillar is degraded from years of shifting and heat, we’ll replace that too, because a clean connection is the difference between a reliable gate and one that only opens when you’re already annoyed.
Service Areas Near Colleyville
We work across the northeast Tarrant County area, including Colleyville service area, Arlington, Fort Worth, Irving, Grand Prairie, and Kennedale. If you’re in Ghost Controls service in Arlington or Ghost Controls service in Fort Worth, we cover you there too.
Book Your Ghost Controls Service in Colleyville Today
If your Ghost Controls gate is giving you trouble, call (817) 241-4067. We’ll answer the phone, talk through what the gate is doing, and get you on the schedule. We offer same-day service for urgent repairs in Colleyville most days, and every estimate is free. Just give me a call - I’ll pick up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colleyville since 2001.