Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Colleyville
Gate motor and opener repair in Colleyville doesn’t have to mean waiting three days for a shop that’s never seen your neighborhood. Gatewood Fence & Gate answers the phone with a live person, every call, and Hal Gatewood has been fixing gate operators since 2001. We send a truck to Colleyville with the boards, limit switches, and gears most likely to fail on the exact machines built into this city’s estate lots. Call (817) 241-4067 and you’ll get a straight answer, a written price before any work starts, and a 90-Day Done Right Promise stamped on the invoice. That’s how we run a gate company in a city where word travels fast over backyard fences.
Key takeaways:
- Most Colleyville gate opener repairs are quoted, approved, and completed same-day because our truck is stocked for the specific Viking, Linear, and Elite models built into this city’s 1990s and 2000s subdivisions.
- Every job carries the 90-Day Done Right Promise in writing. One call brings Hal back, no runaround.
- Free estimates, no trip charge inside the county, and the price you approve before we turn a wrench is the price you pay.
Why Gatewood Fence & Gate Is Colleyville’s Preferred Gate Motor & Opener Company
Gatewood is locally owned and owner-operated, which in Colleyville Gate Parts & Welding matters more than in most places. This city runs on reputation. When a neighbor on Cheek-Sparger Road sees our truck in your driveway, they ask who fixed the gate. That’s why we show up in marked uniforms, background-checked, and ready to work on the machine you have, not the machine we’d rather sell you. Hal’s name is on the shop and on every invoice. You can drive to the shop and look him in the eye if something isn’t right. That’s the oldest accountability there is, and it still works in Colleyville.
Colleyville homeowners call our Gate Repair in Colleyville because we repair gate motors other companies want to replace. We weld on site, in your driveway, so your gate never leaves the property. If a post shifted in the black clay off Glade Road, we reset the post rather than band-aiding the hinge. If a 2004 Viking control board failed after a summer in an unshaded pillar box, we swap the board and make a note to check the enclosure the next time we’re out. The goal is a gate that runs silent and reliable for years, not one that works for three weeks and leaves you calling another company.
Our Gate Motor & Opener Services in Colleyville
Motor Installation
We install gate motors on the custom ornamental gates that define Colleyville’s half-acre to two-acre estate lots. Whether you’re building a new entry off Hall-Johnson Road or replacing a seized operator on a 1998 swing gate, we measure the gate’s weight, travel, and duty cycle before recommending a motor. A heavy wrought-iron gate on a brick pillar entry off John McCain Road needs a motor rated for the load, not whatever the box store had in stock. We install Liftmaster in Colleyville, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we size the motor to the gate, not the other way around.
Motor Repair
Most gate motor failures in Colleyville are repairable. A seized gear, a fried circuit board, a stripped limit switch, a broken capacitor: these are parts that get replaced, not reasons to sell you a whole new operator. We repair motors on the Gatewood shop bench and in your driveway. The machine stays in place. If a 2002 Elite SL-3000 slide operator seized after a spring rain swelled the clay under the post footing, we pull the motor, reset the rack and pinion alignment, replace whatever the ground shift damaged, and have that 800-pound gate gliding again by noon. No patching, just a proper correction you can count on.
Linear Motor Service
Linear operators are common on Colleyville’s slide gates, especially on the larger lots off Pleasant Run Road where a long driveway demands smooth, quiet travel. Linear motors fail predictably: gear wear, capacitor failure, or limit switch drift from years of daily cycling. We stock Linear replacement parts on the truck and can diagnose a Linear opener from the sound it makes before we unbolt the cover. Homeowners around McDonwell School Road call us because their Linear gate stopped mid-travel or started reversing for no reason. We find the actual fault, explain it in plain English, and fix it with the right part.
Slide Motor Service
Slide gates are the workhorses of Colleyville’s estate entries, and slide motors take the brunt of every cycle. A slide gate that grinds, lurches, or stops short is usually a rack and pinion alignment problem, a worn nylon gear, or a binding track. Sometimes the motor is fine and the gate itself has dragged on a shifted concrete pad. We check the whole system, not just the motor. On a slide gate, the motor only works as well as the gate it’s pulling. That’s the difference between a repair that holds and a repair that gives up in six weeks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
We’re certified to service nine major gate brands, and in Colleyville the ones that matter most are Viking, Linear, Elite, FAAC, and BFT. These are the operators installed in the 1990s and 2000s custom builds south of Highway 26 and throughout the McDonwell and Montclair Parish areas. We keep replacement boards, limit switches, gears, and capacitors for these specific units on our service trucks, because waiting for a part to ship from a regional warehouse means leaving your gate open overnight. That’s not something Colleyville homeowners accept, and it’s not something we ask them to accept. Fast parts access is half the repair.
Common Gate Motor & Opener Problems We See in Colleyville Homes
- Operator failures hitting whole neighborhoods at once. Large sections of Colleyville were built by a handful of luxury developers in tight windows between 1994 and 2005, so entire streets often have the same Viking or Elite operator installed the same year. A technician stocked with late-1990s replacement boards can clear a full day’s calls within a two-mile radius. That’s a workflow pattern essentially unique to a city of this wealth density and build-era uniformity.
- Expansive clay soil shifting posts and pillars. Tarrant County black clay swells and shrinks through North Texas’s wet-dry cycles, and it doesn’t care how much your gate cost. Hinge posts heave, brick pillar bases shift, and a gate that was perfectly aligned in May binds in August. We reset posts and re-align gates seasonally when needed, which is the repair that actually fixes the problem instead of hiding it.
- Circuit boards cooked in unshaded pillar boxes. Colleyville summers hit 105°F routinely. A control board mounted inside a dark brick pillar box with no ventilation can reach 140°F, which shortens lifespan dramatically. We see intermittent motor failures and dead boards in August that trace back to heat, not a bad install. We can relocate or ventilate a control enclosure while we’re in there.
- Worn gears and stripped limit switches on 20-to-30-year-old machines. These gate operators have cycled tens of thousands of times. The gear teeth wear, the limit switches drift, and the gate starts stopping short or slamming hard. The repair is straightforward with the right parts. The operator isn’t junk. It’s just tired, and we have the parts to wake it back up.
Pricing for Gate Motor & Opener in Colleyville, TX
A gate motor repair in Colleyville typically runs between $180 and $450, depending on what failed. Replacing a limit switch or capacitor runs $180 to $260. Replacing a control board on a Viking or Elite opener runs $300 to $480 including the part. A seized gear or broken rack and pinion section runs $250 to $500 depending on access and gate weight. Full motor replacement on a heavy ornamental slide gate runs $1,400 to $3,200 with labor, depending on the operator brand and gate size. Slide motor replacement runs higher on gates over 16 feet or with custom rack systems. Every quote is written, explained, and approved before any work starts. And we stand behind every invoice with the 90-Day Done Right Promise. Call (817) 241-4067 for an exact quote. The estimate is free, and if you already have a written estimate from another company, bring it in. We’ll give you a free second opinion and tell you honestly if the work is needed, not needed, or priced wrong.
We Also Serve Cities Near Colleyville
Our service trucks roll through Colleyville and the surrounding Tarrant County communities every week. If you’re in Bedford near the Harris Methodist campus, Euless off Highway 10, Hurst near the Northeast Mall, or North Richland Hills off Davis Boulevard, the same owner-operated crew handles your gate motor and opener work. You can learn more about our Gate Motor & Opener in Colleyville coverage and what to expect from a visit.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Colleyville
Colleyville’s luxury build-out happened in concentrated waves between roughly 1994 and 2005, when custom estate lots went up quickly with the same gate operators installed across whole subdivisions. Those Viking, Linear, and Elite units are now 20 to 30 years old, and their circuit boards, gears, and capacitors are reaching end-of-life on roughly the same schedule. We see it street by street: a 1999 Elite fails on one block, then a 2001 Viking fails three doors down. It’s not a coincidence. It’s build-era uniformity, and it means we keep these specific parts on hand to fix them right the first time. Call (817) 241-4067 and tell us the year your gate was built. We’ll likely know the operator model from that alone.
The black clay under Colleyville swells when it rains and shrinks when it dries, and it does it every single year. That movement pushes brick pillar bases and gate post footings out of level, which means your swing gate starts dragging, binding, or stopping short. The motor then works harder every cycle, which accelerates gear wear and shortens motor life. We fix this by resetting the post or re-aligning the gate before it wrecks the operator. The gate sags in the hinge post, not in the middle. That’s where we start. Call (817) 241-4067 and we’ll tell you if your gate issue is mechanical, electrical, or soil heave.
Yes, and this is more common in Colleyville than almost anywhere else in Tarrant County because so many estate entries are custom-fabricated with integrated intercom and camera systems from the original build. We integrate gate motors with existing intercom, keypad, camera, and access control systems without ripping out what works. Whether it’s a DoorKing telephone entry panel on a stone pillar off Pleasant Run Road or a newer smart controller tied to your phone, we match the opener to the system you already have. Your gate operator, intercom, and camera should talk to each other. That’s the whole point of the system. Call (817) 241-4067 and we’ll make sure yours do.
Yes, and here’s the Colleyville-specific reason: our storm season brings lightning, wind, and power flickers that knock out grid power often enough that a gate without battery backup leaves you either manually wrestling an 800-pound iron gate or stuck outside your own driveway. Battery backup keeps your gate cycling through outages and brownouts, and it’s a straightforward add-on to most LiftMaster, FAAC, Viking, and Elite operators. If your home has no other entry point, it’s not optional. We can install and test a battery backup system while we’re on-site for any other repair. Call (817) 241-4067 to add one before the next storm front rolls through.
Gate operators installed in Colleyville must meet current UL 325 entrapment protection standards, which means photoelectric sensors or contact edges that reverse the gate if something or someone is in its path. Tarrant County inspections enforce this on new installs and any substantial repair that touches the operator. We install, test, and document entrapment protection on every gate motor we service or replace, and we can bring older installs up to current code while we’re on-site. A heavy gate without working entrapment protection is a serious safety issue, not a paperwork issue. That’s the machine’s job: stop when it meets resistance. If yours doesn’t, call (817) 241-4067 and we’ll make it right.
Contact Gatewood Fence & Gate in Colleyville
If your gate motor is grinding, stopped, or just acting like it’s had enough of the Texas heat, call (817) 241-4067. A live person answers, not a voicemail or a call center. We’ll ask what the gate is doing, tell you what it likely needs, and schedule a time that works for you. Colleyville residents get a free estimate, a written price before any work begins, and the 90-Day Done Right Promise on every job. Hal Gatewood’s name is on the invoice, the shop is down the road, and he’s been fixing gates since 2001. That’s not a slogan. That’s a guarantee you can hold him to.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Colleyville since 2001.