Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across North Richland Hills
If your automatic gate stopped responding in North Richland Hills, the problem usually comes down to one of three things: a motor that has lost alignment, a control board that got fried by weather, or a post that shifted in the clay. We fix all three, same day in most cases, and you will know the price before we turn a wrench. Hal Gatewood has been working on gates since 2001, and our Gate Motor & Opener crew knows the NRH soil and HOA requirements better than any out-of-town shop ever will. Call (817) 241-4067 and a live person answers, any hour.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Motor & Opener Company
North Richland Hills homeowners have a particular problem: the black clay under their gate posts does not sit still. Spring rain swells it. August heat contracts it. The post moves, the motor binds, and suddenly a gate that worked in April is throwing error codes by Labor Day. We have watched this cycle repeat for years across the city’s older subdivisions, and we schedule our work around it rather than pretending a one-time fix will hold.
Hal Gatewood’s name is on the shop and on every invoice. The address is published. The license number is public. If the work is not done right, the 90-Day Done Right Promise puts it in writing that one call brings him back, no runaround and no invoice at the door for the callback. Residents around North Richland Hills keep our number saved because the person who answers the phone is the same person who will show up at the gate. No voicemail. No dispatch queue. No call center three states away.
We are certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your HOA has a preferred brand or a specific model on the approved list, we have likely already installed or repaired it in NRH. That matters when the management company wants the work done to spec and the gate back in service before residents start calling.
Our Gate Motor & Opener Services in North Richland Hills
Motor Installation
Gate Installation in North Richland Hills almost always starts with the post, not the motor. We check that the post is plumb and the footing is still solid before we mount anything to it. A new motor on a shifting post is a warranty claim waiting to happen. We install swing and slide operators from FAAC, BFT, Linear, Viking, and the other major brands, and we set the travel limits and force settings for the actual weight and wind load of your specific gate, not a factory default. Every installation gets a written quote first, and the price we quote is the price you pay.
Motor Repair
Most motor repairs in NRH come down to the same root cause: soil movement. A post tilts a few degrees, the arm or rack binds, and the motor strains until a gear strips or a capacitor blows. We do not just swap the motor and call it fixed. We correct the alignment, replace what actually failed, and use our Gate Parts & Welding in North Richland Hills when the bracket or post plate needs reinforcement. On-site welding means your gate stays in your driveway instead of getting hauled to some shop across the county. The repair-first philosophy saves you money and keeps the original hardware when it still has life in it.
Linear Motor
Linear operators are common on the sliding gates throughout North Richland Hills, especially in the newer HOA communities along the northern edges of the city. These motors work well right up until the track shifts or the rack and pinion gets knocked out of alignment. Soil contraction in late summer is our busiest season for linear motor realignment in NRH. We check the full run of the gate, not just the motor housing, and we set the limits so the gate does not slam or stall at either end.
Slide Motor
Slide gates need a straight, level track, and clay soil does not like to keep things straight or level. When the ground under the track heaves, the gate drags and the slide motor works harder than it should. We reset tracks, repack the footing when needed, and realign the drive so the motor is not fighting the gate on every cycle-part of our North Richland Hills Gate Repair process. Our crew recently serviced a LiftMaster slide gate operator at a gated community off Rufe Snow Drive where the post had shifted enough to bind the rack and pinion. We reset the footing and realigned the motor, and we coordinated the work through the HOA management company so the shared entry system was back in service the same afternoon.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We stock parts for Linear and FAAC operators because those brands are all over Tarrant County, and we keep common BFT components on the truck for the same reason. If your gate motor brand is on the approved list for your NRH HOA, chances are we have serviced that exact model within a few miles of your home. We carry spare control boards, photo eyes, remotes, and gear kits so most repairs do not wait on a parts truck from out of state. When a board is dead and has to be ordered, we tell you the timeframe before any work begins, not after.
Common Gate Motor & Opener Problems We See in North Richland Hills Homes
- Spring post heaved and threw the motor out of alignment. Wet springs swell the black clay, hinge posts tilt, and swing motors bind or throw error codes. We see this every March through May across the older subdivisions west of Rufe Snow Drive.
- Summer drought pulled the post out of plumb just enough to misalign photo eyes. August and September are peak months. The gate reverses or refuses to close because the safety beam is off by half an inch. We schedule post-straightening calls late summer, when the clay has fully contracted and the drift is visible.
- Hail or freeze damage to exposed control boards. Winter Storm Uri in February 2021 damaged a lot of automated gate equipment in NRH, and hail season does its own work on control boards and wiring. The units sit outside year-round. We replace boards and re-seal enclosures so the next storm does not kill the new one.
- Worn gears and stripped racks from years of a dragging gate. The gate was binding for months before the motor failed. The motor gets blamed, but the real problem was the track or the post underneath it. We fix the cause, not just the part that finally gave out.
Pricing for Gate Motor & Opener in North Richland Hills, TX
A typical motor repair in North Richland Hills runs $220 to $480 depending on what failed. Realignment and post-reset work usually lands between $180 and $340. Full motor installation, including new operator, brackets, and programming, typically ranges from $850 to $2,400, with slide gates on the higher end because of track work. Battery backup systems run $250 to $600 installed on most existing operators. Intercom integration adds $400 to $1,200 depending on wiring and the system your HOA uses. Every job gets a written quote before any work starts, and the quote is the price. Nobody changes numbers at the door. We offer $40 off any repair over $200, no trip charge inside the county, and a free second opinion on any written estimate you have from another company. Seniors and veterans get a permanent 10% discount. Call (817) 241-4067 for an exact number.
We Also Serve Cities Near North Richland Hills
Our crew serves the whole northeast Tarrant County area, including Hurst, Haltom City, Bedford, and Colleyville. Same local pricing, same Gate Motor & Opener team, same 90-Day Done Right Promise on every job. If you are just outside NRH, call (817) 241-4067 and we will give you a straight answer on timing and cost.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in North Richland Hills
The black clay soil under your gate posts swells with spring rain and then contracts sharply during the summer drought, which shifts the posts enough to bind the gate and throw the motor out of alignment. August and September are when the drift shows up worst. The fix is a post reset and motor realignment, and we schedule those calls for late summer when the clay has fully shrunk. Call (817) 241-4067 and we will come look at it before the gate tears up its own gearbox.
Yes. We work with HOA management companies throughout North Richland Hills on a regular basis, especially for shared entry systems and gated communities. We handle the communication, submit the paperwork and photos the management company needs, and schedule the work so the gate is not down during peak traffic. The Rufe Snow Drive job I mentioned earlier was coordinated through the HOA the same afternoon. Give us your management company’s contact info when you call, and we will take it from there.
Yes, we match existing hardware and motors to whatever your HOA has already approved, whether that is a wrought iron driveway gate in the northern communities or an older wood privacy gate on the west side. We do not push a different style or a “better” brand when the HOA has a spec. We install and repair to the existing standard, and we can document everything for the architectural review committee if they need it.
The soil movement itself does not hurt the battery, but the misaligned gate it causes makes the motor work harder on every cycle, which drains the battery faster and puts more strain on the whole operator. If your gate is binding even slightly, the battery backup will not hold a charge like it should. We check the gate alignment when we install battery backups in NRH, because a mounted battery on a dragging gate is a bandage, not a repair. Backup units for most existing operators run $250 to $600 installed.
UL 325 requires entrapment protection on automated gates, typically photo eyes, contact edges, or both depending on the gate type and installation. In North Richland Hills, the photo eyes are usually the first thing to fail when a post shifts even half an inch, which is why we test them on every service call. If the gate reverses or refuses to close, do not disable the safety device. Call (817) 241-4067 and we will test the system, realign whatever moved, and confirm the gate closes safely without bypassing the protection. Estimates are free, and there is no trip charge inside the county.
If your gate motor is acting up in North Richland Hills, call (817) 241-4067. A live person answers, the quote is in writing before the work starts, and the job is backed by the 90-Day Done Right Promise. Hal Gatewood’s name is on the shop, and the shop is down the road. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving North Richland Hills with gate motor and opener repair since 2001.