Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Everman
If your gate is sagging, dragging, or refusing to open in Everman, you’re dealing with a problem that only gets more expensive the longer it sits. A gate that won’t close means your work truck, trailer, and tools sit unprotected on a street that sees its share of traffic off Enon Avenue and Trammell Street. Gate repair in Everman typically runs between $145 and $680 depending on whether we’re rebuilding a hinge post, replacing a control board, or welding a cracked frame. We answer the phone at (817) 241-4067 and we show up when we say we will. Hal Gatewood’s name is on the shop, and he’s been fixing gates since 2001.
Why Gatewood Fence & Gate Is Everman’s Preferred Gate Repair Company
We’ve worked on gates all over Everman, from the older homes off Trammell Street to the tight side yards near the school district buildings and the streets that back up to Village Creek. What we see here is different from what you’d find in Colleyville or Southlake. Everman yards are working yards. You park a 3/4-ton truck behind that gate, maybe a flatbed trailer with a mower, and the gate cycles six or eight times a day instead of twice. Hardware that was sized for a decorative suburban gate just doesn’t hold up. We understand that before we even roll up.
The person who shows up at your Everman home is someone Hal would trust on his own driveway. You don’t get a voice menu when you call, and you won’t be transferred to a queue. A live person answers, day or night. When we give you a price, that’s the price, quoted and agreed before any work starts. And every job, from a hinge replacement on Boswell Road to a full operator swap on a 20-foot double gate near the high school, carries our 90-Day Done Right Promise in writing. If it’s not done right, one call brings us back.
Our Gate Repair Services in Everman
Electric Gate Repair
Electric gate openers fail in Everman more from heat and oversized gates than from age alone. The control board sits in a metal box that bakes in 105°F afternoons through July and August, and the wiring insulation gets brittle years earlier than the manufacturer expects. We diagnose the actual fault rather than swapping the whole operator, and we’re certified to service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most board, capacitor, and safety sensor replacements are done the same day we look at it.
Automatic Gate Repair
An automatic gate in Everman lives a hard life. The thermal overload trips because the motor is trying to swing a gate that weighs more than the operator was ever rated for. We see the same thing on the slide gates along narrow driveways where a trailer has clipped the track. We’ll check the full run: motor torque, limit switches, photocells, and the mounting bracket. If the operator is genuinely undersized, we’ll tell you straight and give you an honest recommendation instead of selling you a board you don’t need.
Hinge & Post Repair
The gate sags in the hinge post, not in the middle, and that’s where we start. Tarrant County black clay swells with spring rain and shrinks through fall, working posts loose a fraction of an inch each year. Everman lots are small, so gates are often mounted on posts that were never set deep enough in the first place. We dig out, re-set the post in a deeper footing with proper concrete through the clay, and rebuild hinges so the gate sits square and swings true. This is our bread and butter here.
Gate Realignment
If your gate drags the ground on the latch side, it’s usually a post leaning from clay heave. If the two leaves of a double gate no longer meet in the middle, it’s usually hinge wear. We realign gates on-site, not in a shop, and then we reinforce the hinge post so you don’t re-align it after every wet spring. The service area from Everman over to the railroad easement and down toward Village Creek sees this pattern constantly, so we come prepared.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We’re certified on nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When your BFT operator loses its limit memory or your Linear receiver stops responding to the keypad, we know the fix and we stock common parts for Everman jobs. If we need a part we don’t have on the truck, we source it fast through local suppliers, not through a weeks-long backorder.
Common Gate Repair Problems We See in Everman Homes
- Thermal overload tripping on warm afternoons - a 16-foot double gate swinging on a 1/2 HP residential operator in Everman’s summer heat will trip every time. The fix is usually a properly sized operator, not just resetting the breaker.
- Post heave from the black clay - seasonal wet-dry cycles push and pull gate posts out of plumb. This throws off the latch alignment, makes the gate drag, and stresses hinges until they snap.
- Worn slide gate rack teeth - in tight side yards common to Everman’s smaller lots, trailers back over the track lip and chew the rack teeth, causing the chain to jump and the gate to buck.
- Dead keypads and control boards from heat - metal boxes mounted in full sun can hit 130+°F inside. Wiring insulation and solder joints fail early, and the keypad stops reading codes.
Pricing for Gate Repair in Everman, TX
Here’s what you’ll actually pay. A basic hinge replacement or weld repair on a single gate in Everman typically runs $145 to $280. Post re-setting - digging out a leaning post, re-pouring concrete, and re-hanging the gate - runs $325 to $575 depending on depth and diameter. A new control board install runs $210 to $460, and a full operator replacement on a 16-to-20-foot double gate runs $680 to $1,850 depending on the brand and horsepower. Every job has a written quote agreed before we touch anything, and that number holds. For an exact number on your gate, call (817) 241-4067. You’ll reach a live person. Ask about our $40 off any repair over $200, and if you’re a senior or veteran, we automatically take 10% off. No trip charge for Everman addresses, ever.
We Also Serve Cities Near Everman
Most of our Everman customers come from referrals in Arlington, Fort Worth, Colleyville, and Irving. If you’ve got family or a business in those areas, they can call the same number and get the same service. For a deeper overview of what we cover, see our Gate Repair hub. If you’re reading this from Everman, you’re already where we’re headed. See the full Gate Repair in Everman page for local service details.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Everman
Your operator is undersized for the gate it’s swinging. A 1/2 HP residential opener was never built to cycle a 16-foot double steel gate carrying years of Everman sun and rain, especially in summer when the motor’s already heat-soaked. The fix is an operator rated for the gate’s weight and duty cycle, not just another reset. We’ll verify the actual load on-site and spec the right unit. Call (817) 241-4067 and we’ll come put a number on it free.
Yes. The post has to be dug out and re-set below the clay’s seasonal moisture zone, in a proper concrete footing with drainage, not just re-shimmed and called good. We do this routinely on Everman jobs from Trammell Street to the Village Creek side. One re-set, done right, outlasts a decade of wet-dry cycles. We’ll quote it up front and stand behind it.
Absolutely. The rack teeth on your gate’s track are worn, likely from vehicle or trailer traffic running over the lip in a tight side yard, which is common all over Everman. We replace the rack section, re-seat the chain, and re-align the track so it doesn’t happen again within weeks. It’s a same-week job, not a same-month one.
No, and it’s dangerous. A photocell that doesn’t reverse the gate can seriously injure a child, a pet, or anyone walking through your driveway. Current safety standards require an operational safety device on every automated gate. We treat this as a priority repair, not an upgrade suggestion, and we won’t leave a gate running without it. Call us and we’ll come out same-day.
Maybe, but probably not for the duty cycle you need. Solar openers work great on low-use single gates in full sun. On a 20-foot double gate that cycles multiple times a day for work trucks and trailers, the battery won’t keep up and the solar panel won’t recharge it fast enough, especially through North Texas winters. We’ll give you the honest math on your particular gate before you spend the money. Free estimates - call (817) 241-4067.
What a Gate Repair in Everman Actually Looks Like
We were called to a home on Trammell Street where a 16-foot double swing gate hung off a sagging hinge post, and the keypad entry was dead from a heat-baked control board. The gate dragged on one side, the latch wouldn’t catch, and the truck had to be pulled out through the gap every morning. Our crew reset the post in a deeper footing with concrete poured through the black clay, then rebuilt the hinges from scratch. We wired a new LiftMaster slide gate operator behind a safety photocell so the gate reversed on anything in the path, and the whole thing worked without binding. That’s Everman gate repair: you keep your gate, we take it apart to the failure point, and we build it back better than it was bolted together the first time.
How Everman’s Working Driveways Change Gate Repair
Everman is a dense, working-class enclave in southern Tarrant County where a lot of households park work trucks, trailers, and heavy equipment at home. That changes gates. Residential driveway gates here are routinely 16 to 20 feet wide because the opening has to clear a gooseneck trailer or a flatbed with a mower on it. Those oversized gates are usually hung on residential-grade hardware that was spec’d for a decorative suburban gate, not daily commercial-level cycling. Fix the panel without the post and you’ll fix it twice. The gate motor burning out is often just the end of a chain that started when the hinge post first shifted in the clay and added a few hundred pounds of drag to every cycle. We chase the whole chain, not the one obvious part.
Call the Gate Repair Team Everman Trusts
If your gate is sagging, dragging, or dead, call (817) 241-4067. You’ll reach a live person, not a menu. We’ll schedule a visit that fits your day, quote a fixed price before any work starts, and back the repair with our 90-Day Done Right Promise. Hal Gatewood’s name is on the shop and on every invoice, and if you ever want to look him in the eye, the address is published and the door’s open.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Everman and southern Tarrant County with gate repair since 2001.