Lock Repair in Arlington, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Lock Repair in Arlington, TX

If your gate lock is jamming, sticking, or simply won’t latch anymore, we can usually get it back to working order without replacing the entire hardware system. At Gatewood Fence & Gate, gate repair and lock repair typically runs between $125 and $275 depending on whether we need to realign the latch, replace a broken spring, or service the electronic strike. We provide upfront pricing for every job, and because we are local, we don’t charge a trip fee inside the county. Call us at (817) 241-4067 to get a free estimate over the phone or to schedule a time for me or one of my crew to come take a look.

I have been fixing gates in Arlington since 2001, and I have seen just about every way a lock can fail. Most of the time, the problem isn’t the lock itself but the gate sagging or the post shifting slightly in our Texas soil. If you are looking for Gate Repair in Arlington, you need someone who understands that a lock is only as good as the gate it is attached to. We don’t believe in swapping out parts that don’t need replacing just to run up a bill. We fix what is broken, and we stand behind the work with our 90-Day Done Right Promise, which is written on every invoice.

When You Need Lock Repair

You usually know when a lock is failing before it stops working entirely. A gate that requires a “trick” to close or a key that sticks in the cylinder is telling you that something is misaligned or worn out. If you wait too long, you risk the gate swinging open and hitting your car or, worse, leaving your property unsecured.

• The Latch Doesn’t Catch: If you have to lift the gate or shove it hard to get the latch to click, the gate has likely sagged. This puts constant pressure on the lock mechanism, which will eventually snap the internal spring or bend the latch pin.
• Key Won’t Turn: Humidity and grit are hard on locks. If your key is resisting or getting stuck, the internal pins are likely worn or dirty. We can often clean and lubricate these mechanisms on-site without needing a full replacement.
• Electronic Strike Failure: If you are using a keypad or remote and the gate won’t unlock, it might be the solenoid or the wiring, not the mechanical lock. We troubleshoot these systems-including brands like FAAC and Linear-to see if it’s a simple connection issue before recommending a new part.
• Rust and Corrosion: Arlington weather can be tough on metal. If your lock has rusted solid, it might be time for a swap. We prefer to use high-quality, weather-rated hardware that holds up better than the cheap stuff you find in big-box stores.
• Gate Won’t Stay Shut in Wind: If a gust of wind blows your gate open, the catch is misaligned or the spring tension is too light. This is a common issue in open neighborhoods where wind resistance is a real factor.

Our Lock Repair Process

When you call us for help, I don’t send a salesperson to your door. I send someone who knows weld & rust repair and how to use a welder and a wrench. We treat your property like it is our own, and we don’t leave until the gate swings and latches exactly like it should.

1. Assessment of the Gate Alignment: Before touching the lock, we check the gate itself. If the gate is sagging, fixing the lock is a waste of time. We check the hinges and the post to ensure the gate is plumb.
2. Hardware Inspection: We take apart the lock housing to inspect the internal components. Often, it is just a matter of cleaning out debris or tightening a loose screw that has rattled over the years.
3. On-Site Adjustment or Repair: If the latch pin is bent or the strike plate is misaligned, we adjust it on the spot. If welding is required to reinforce the lock box or the latch, we do that right there in your driveway.
4. Testing Under Tension: We test the latching mechanism repeatedly. A lock that works when you push it by hand might fail when the gate motor slams it shut. We make sure it handles both.
5. Final Verification: We show you how the lock operates before we pack up. If we adjusted the alignment, we explain why it happened so you know what to look for in the future.

Lock Repair Pricing in Arlington

We believe in upfront pricing. You will never be surprised by a bill when we are finished. While every gate is different, these ranges reflect what most of our neighbors in Arlington pay for common lock-related repairs.

If you have a written estimate from another company, I am happy to provide a free second opinion. We also offer $40 off any repair over $200, and we have a standing 10% discount for seniors and veterans. Because we are locally owned and owner-operated, we keep our overhead low and pass those savings to you. Give us a call at (817) 241-4067 to discuss your specific gate.

FAQs - Lock Repair

How much does it cost to fix a gate lock in Arlington?

Most simple lock repairs, such as realigning a latch or fixing a stuck mechanism, cost between $125 and $275. We provide a firm quote before we start any work, and if you have a written estimate from elsewhere, we are happy to take a look at it for free to see if we can save you money or provide a better, longer-lasting repair.

Can you fix a lock on a gate that uses a keypad?

Yes, we are experienced with automatic gate repair and electronic access control systems and can troubleshoot issues with brands like BFT, Viking, and other major manufacturers. Often, the issue is not the electronic keypad itself but the solenoid or the latch strike that it controls. We can diagnose whether the problem is electrical or mechanical and repair it on the spot.

Is it better to repair or replace the lock?

In most cases, we prefer to repair the existing hardware if it is high quality, as the original installation is often better than a cheap replacement. However, if the metal is severely compromised by rust or if the internal mechanism is beyond repair, we will tell you honestly. We won’t sell you a new lock if a $50 adjustment will fix the one you have.

Do you offer emergency service if my gate won’t lock?

A gate that won’t lock is a security risk, and we understand that you can’t always wait for a standard appointment window. We have a live person answering the phone 24 hours a day, 7 days a week, at (817) 241-4067. If you are in a bind, call us, and we will do our best to get someone out to secure your property as quickly as possible.

Gate security is about more than just convenience. It is about keeping your home safe and your driveway clear. Whether you have a simple manual latch or a complex electronic system, you need a local expert who will show up when they say they will and do the job right the first time. We have been serving Arlington with honest, straightforward gate work since 2001. If you need help with your gate, call (817) 241-4067 today for a free estimate or to ask a question about your specific hardware. You can also visit our home page to see all the ways we can help keep your property secure.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington.