Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Richland Hills, TX
When a gate stops latching in Richland Hills, you usually find one of two things: a hinge post that’s leaning toward the yard, or a latch bar that no longer lines up with the strike plate by half an inch. We’ve fixed both enough times on these streets to know the real culprit is often the ground under the post, not the hardware itself. A dragging gate on a 1960s ranch lot in Richland Hills usually has a post that’s been pushed out of plumb by clay soil that swelled in the spring and shrank in the summer. We come out, look at the whole picture, and fix the root cause. Call (817) 241-4067 and you’ll talk to a live person, any hour, any day. Hal Gatewood has been fixing gates since 2001, and his name is on the shop, not on a call center script.
Key Takeaways:
- Most Richland Hills gate failures trace back to post movement in Blackland Prairie clay, not worn parts.
- We reset posts in a deeper concrete collar (36 inches or more) before adjusting hinges, so the fix holds.
- Every job carries Hal’s 90-Day Done Right Promise in writing. If it’s not right, one call brings him back.
- Free estimates, no trip charge inside the county, and the price you’re quoted is the price you pay before any work begins.
- Live person answers the phone 24/7. Not a voicemail. Not a chatbot.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Richland Hills Homeowners Choose Gatewood Fence & Gate
We’ve worked on gates along Ruth Road, through the neighborhoods off Glenview Drive, and in the pockets around Richland Middle School and Hardeman Elementary. These are tight, established streets where the houses sit close together and the fences are old enough to have stories. Hal’s crew shows up in uniform, background-checked, and the person who quotes the job is the same person you’ll see in your driveway. That matters in Richland Hills, where a wrong quote at the door is a quick way to lose a neighbor’s trust.
The reviews from this area mention the same things: the job started on time, the price was the price, and the welding was done on the spot rather than the gate being hauled to a shop somewhere in Dallas or Fort Worth. Hal’s repair-first philosophy means we don’t sell a new gate when a post reset and two new hinges solve the problem. We’re certified on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, but we’ll tell you honestly if the opener you have is worth saving. Sometimes it is. Sometimes it isn’t, and we’ll show you why before you spend a dollar.
Hal Gatewood has been at this since 2001. His address is published. His license number is on the invoice. The 90-Day Done Right Promise is stamped on every job ticket, not hidden in fine print. Senior and veteran customers get a permanent 10% discount. A free second opinion on any written estimate from another local company is always available, and $40 comes off any repair over $200. Those aren’t haggling points. They’re standing offers.
Gate Repair Services We Offer in Richland Hills
Gate Repair
A gate that drags, sags, or won’t latch in Richland Hills usually has a post that’s shifted in the clay, not a hinge that’s worn out. We fix the panel, the post, and the hardware in one trip, and we weld on site so the gate stays in your driveway. Fix the panel without the post and you’ll fix it twice. Learn more about our Gate Repair in Richland Hills.
Gate Installation
New wooden privacy gates and chain-link side-yard gates on these 1950s and 1970s lots often get rehung on old concrete footings that are too shallow and already cracked from decades of clay expansion. We pour footings at least 36 inches deep to get below the active movement zone before the first board goes up. Learn more about our Gate Installation in Richland Hills.
Gate Motor & Opener
When a LiftMaster, BFT, or Ghost Controls opener stops responding in Richland Hills, the first thing we check is whether the gate itself is binding from a shifted post. A motor fighting a racked frame burns out fast, and we’d rather save you that second bill. Learn more about our Gate Motor & Opener in Richland Hills.
Gate Access Control
We install and service keypads, intercoms, and vehicle detection loops for homes and small properties in Richland Hills. When you need a gate that opens for you and not for everyone else, we’ll set it up and show you exactly how it works before we leave. Call (817) 241-4067 for a free measure and written price.
Gate Parts & Welding
Hal welds on site in Richland Hills, which means a broken hinge bracket, cracked frame, or bent guide rail gets repaired in your driveway, not hauled to a shop. We keep common hardware for wood, vinyl, and chain-link gates on the truck, and we’ll fabricate what we don’t have. The name is on the shop, and the shop is down the road.
Neighborhoods We Serve in Richland Hills
We work across the whole city. Most calls get same-day attention when the weather cooperates, and we quote a hard arrival window when you call, not an all-day “somebody will be there.” These are some of the streets and pockets we know well:
- Neighborhoods off Glenview Drive
- Streets around Ruth Road and Vance Road
- Blocks near Richland Middle School
- Areas around Hardeman Elementary
- Homes off Baker Boulevard near the city’s western edge
Why Richland Hills’s Climate & Housing Affect Gate Repair
Richland Hills sits on the Eastern Cross Timbers’ edge, right on the line where Fort Worth’s post-WWII housing boom met the Blackland Prairie’s expansive clay. That clay is the quiet villain behind most of the gate failures we see here. When a long Tarrant County summer with repeated 100-degree days bakes the ground dry, the soil shrinks and drops away from the post, leaving it loose. When the fall rains or spring storms come, the clay swells back with force, heaving the post sideways. A gate that latched perfectly in March might drag by June and miss the latch by August, not because anything wore out, but because the near-side hinge post has tilted a fraction of an inch toward the yard.
On the 1950s to 1970s ranch homes that make up most of Richland Hills, the original gate posts were often set in 18 to 24 inches of concrete. That’s above the active clay zone, which runs deeper here than in many parts of the metro. So even a freshly installed gate on original footings will start to shift within a couple of seasons. We regularly reset posts in Richland Hills with a concrete collar that extends 36 inches or deeper, below the worst of the heave zone. That’s the difference between a repair that lasts and one you call about again next spring. A sagging gate in this city means the hinge post moved, and the hinge post moves because the ground moved. We start there.
Pricing for Gate Repair in Richland Hills
Every repair starts with a free on-site estimate, and the number we write down is the number you pay. No trip charge inside the county, no surprise line items before we start. Here’s what Richland Hills homeowners typically see:
- Hinge replacement and latch adjustment: $90-$180, depending on hardware and gate weight
- Post reset with deeper concrete collar (36″ minimum): $280-$550, depending on post size and access
- Gate frame straightening with on-site welding: $150-$350 for typical wood or chain-link gates
- Opener diagnostics and limit/force adjustment: $120-$250 if the motor is sound
- Full wood privacy gate replacement (materials included): $450-$950 for standard 4-6 foot openings
Remember, $40 comes off any repair over $200, and seniors and veterans always get 10% off. Call (817) 241-4067 for an exact quote. Estimates are free.
Service Area - Cities Near Richland Hills
We serve Richland Hills full-time and work regularly in the surrounding area. If you’re a neighbor in Arlington, Fort Worth, Colleyville, or Irving, the same crew, the same promise, and the same straight answer apply. Our scheduling is handled out of the Dallas-Fort Worth office, and crews work local, not on rotation.
Serving Richland Hills, TX - Our Local Coverage Area
We’re based in the Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Richland Hills
Most Richland Hills gate repairs fall between $90 and $550 depending on whether the post needs resetting, the gate needs welding, or the opener needs adjustment. Simple hinge and latch work starts around $90, while a full post reset on a 1960s lot with compacted clay access might run up to $550. You’ll get a firm written price before any work begins. Call (817) 241-4067 and Hal’s crew will give you a straight number.
Yes, in most cases we can. We hold same-day slots for security problems like gates that won’t close or won’t latch, and a live person answers the phone 24 hours a day at (817) 241-4067. When you call, you’ll get a real arrival window, not an all-day wait.
A gate sags in the hinge post, not in the middle, and in Richland Hills that post is usually moving because the Blackland Prairie clay under it is heaving and shrinking with the seasons. If your previous repair only replaced hinges or latch hardware without addressing the post footing, the problem will come back. We reset the post in a deeper concrete collar before we touch the hardware.
Yes. We’re certified to service BFT, Linear, Viking, Ghost Controls, LiftMaster, and several others. If your opener is worth saving, we’ll tell you and fix it. If a shifted gate frame is what’s killing the motor, we’ll show you that instead of selling you a replacement opener you don’t need.
A full installation includes removing the old gate, setting new posts in concrete footings at least 36 inches deep, hanging the new wooden or chain-link gate, and adjusting the latch and hinges so the gate closes smoothly. Every job also includes Hal’s 90-Day Done Right Promise in writing. Call (817) 241-4067 for a free measure and a written price.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, fixing gates across Richland Hills since 2001.
For a live, straight answer and a free estimate, call Hal’s crew at (817) 241-4067. Someone will pick up, any time, day or night. That’s the whole point.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richland Hills Customers Say
"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield"Safety photo eyes on our old gate had been bypassed by whoever serviced it last, which he was genuinely annoyed about on my behalf. Fitted proper sealed ones and wired them the way they should be."
- Otis Redmond"Fitted a keypad and an intercom so my mother can let carers in without coming down the drive. He set it up and then made her practise with it until she was comfortable."
- Lucinda Marchbanks