Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Grand Prairie
Most gate problems in Grand Prairie come down to two things: Blackland Prairie soil that heaves with every rain-drought cycle, and summer heat that pushes 105°F before noon. We rebuild hinges, re-set posts, realign frames, and replace burned-out operators right in your driveway, usually on the first visit. No hauling your gate to a shop. No swapping parts that still have life in them. If you’re in Grand Prairie and a gate won’t open, sags, drags, or just stopped working, call (817) 241-4067. Hal Gatewood or one of his crew will answer and tell you straight what it’ll take to fix it. We know the neighborhoods, the soil, and the builders, because we’ve worked every corner of Grand Prairie for years.
Key takeaways:
- On-site welding and repair-first approach, backed by our 90-Day Done Right Promise in writing.
- Live person answers 24/7, so you’re not leaving a voicemail at midnight when your gate won’t close.
- Upfront pricing agreed before we touch a bolt, with a free second opinion on any written estimate.
- $40 off any repair over $200, no trip charge inside Grand Prairie, and 10% off for seniors and veterans.
Why Gatewood Fence & Gate Is Grand Prairie’s Preferred Gate Repair Company
People in Grand Prairie don’t want a faceless outfit that quotes one price on the phone and hands over a different invoice at the door. We get that. Hal Gatewood’s name is on the shop and on every invoice, and his address is published where you can look it up. That’s the oldest accountability there is.
We’ve repaired gates off Belt Line Road, along Lake Ridge Parkway, and down near Joe Pool Lake. Homeowners around Mira Lagos and Lynn Creek call us for HOA entry problems and builder-grade openers that failed early. Commercial managers along the I-20/161 corridor call us for warehouse slide gates that won’t stay on track. The person who shows up is background-checked, uniformed, and works for Hal himself, not a subcontractor passing through. And when we finish, the 90-Day Done Right Promise is stamped in writing on the job.
Our Gate Repair team shows up when we say we will, because we’re scheduling from our Dallas-Fort Worth office and we staff for Grand Prairie daily. A live person answers the phone around the clock, so your emergency is never routed to a call center three states away.
Our Gate Repair Services in Grand Prairie
Electric Gate Repair
When a Grand Prairie Gate Motor & Opener quits, it’s usually the motor, the control board, or a transformer baked by heat. Builder-grade operators installed in newer subdivisions around Mira Lagos and Lynn Creek often burn out after just a few summers of 105°F heat indexes. We diagnose the exact failure, replace only what’s dead, and stock parts for nine major brands so we’re not waiting on a delivery truck for a week.
Automatic Gate Repair
An automatic gate is a system, not just a motor. When it stops halfway or reverses for no reason, the problem can be a misaligned safety edge, a bad limit switch, a failing gearbox, or a control board that lost its mind. In Grand Prairie’s heat we see more thermal shutdowns and board failures than anywhere else in the metro. We test the whole system, not just the obvious part, because fixing the panel without the post means you’ll fix it twice.
Hinge & Post Repair
Here’s what most people miss: a gate sags in the hinge post, not in the middle. Grand Prairie’s black clay soil expands and contracts hard enough to shift a post out of plumb even when the panel looks straight. We offer our Gate Parts & Welding in Grand Prairie on site, re-set posts in concrete, and replace worn hinge barrels so the gate hangs true again. If the post is still sound, we make that call honestly rather than selling you a new gate you don’t need.
Gate Realignment
When a Grand Prairie gate drags on the concrete apron or binds against the post, the frame has usually racked from soil movement and heat expansion. Steel and aluminum expand enough in a Texas summer to close clearances to zero. We bring the gate back to square, adjust the hinge geometry, and often add a heavier bottom roller or floor guide where the apron has buckled. Show me the gate closing on its own and I’ll show you where it’s failing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grand Prairie
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Grand Prairie customers, we stock replacement parts locally for FAAC, BFT, Linear, and Viking because those four show up constantly in both the residential tracts and the Great Southwest Industrial District. That means faster turnaround than a shop that has to order every board and gear from a distributor in another state. If your opener is a brand we don’t stock, we’ll tell you that up front and give you an honest timeline, not a vague “parts are on the way.”
Common Gate Repair Problems We See in Grand Prairie Homes
- Black clay soil heave throwing posts out of plumb. The Blackland Prairie under Grand Prairie shrinks and swells with every wet-dry cycle. Your gate post can drift a half-inch out of square in a single summer while the fence panels still look perfectly straight.
- Builder-grade operators dying young in the heat. Homes built in the 1990s and 2000s often sold with the cheapest operator the builder could install. Grand Prairie’s heat indexes over 105°F bake the motor windings and control boards until they fail, sometimes after only three or four summers.
- Steel frames binding in high heat. Wrought-iron and tubular-steel gate frames expand enough in a Texas July to drag on the concrete apron or bind against the latch post. It’s worse in Grand Prairie than in most of the metro because the heat hangs on longer over the black prairie soil.
- Manual gates retrofitted with automation that was never designed for it. In Grand Prairie’s older tract neighborhoods, many ornamental driveway gates were installed manual in the 1990s. Years later, automation was added without a proper power run or conduit, and now the wiring is failing or the gate geometry fights the opener.
Pricing for Gate Repair in Grand Prairie, TX
Gate repair in Grand Prairie generally runs between $180 and $600 depending on what’s failed. Here’s the honest breakdown:
- Hinge replacement or re-setting a post: $180-$350 for typical residential work.
- Gate realignment: $150-$300 for most swing gates.
- Electric operator or control board repair: $250-$600 depending on brand and part cost.
- Weld repair on broken frame or hinge mount: $120-$400 depending on extent.
Every price is quoted and agreed upon before any work starts, in writing. No add-ons at the door. If you have a written estimate from another Grand Prairie shop, we’ll give you a free second opinion. We also knock $40 off any repair over $200, and seniors and veterans get a permanent 10% discount. Call (817) 241-4067 for an exact quote, estimates are free.
We Also Serve Cities Near Grand Prairie
If you’re just outside Grand Prairie, we run calls regularly through Euless, Duncanville, Bedford, and Hurst. Same crew, same 90-Day Done Right Promise, same live person on the phone. Gate Repair in Grand Prairie is our home base, but we don’t blink at a drive across the county line.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Grand Prairie
The post is the problem, not the panel. Grand Prairie’s black clay soil heaves and contracts enough to pull the hinge post out of plumb, which drops the gate even when the panel itself was just straightened. We re-set the post in concrete and replace the hinge hardware so the gate hangs true again. Fixing the panel without the post means you’ll fix it twice. Call (817) 241-4067 and we’ll check your post alignment free.
We reset the post footing, shim the floor guide, and install a heavier bottom roller to handle the apron deflection. We got called out to a distribution center off MacArthur Boulevard in the Great Southwest Industrial District after a loaded 53-footer buckled the asphalt drive apron in front of a rolling steel warehouse gate. The slide gate’s bottom roller and floor guide jumped the track, leaving the gate jammed half-open. Our crew saw this exact failure again later that week at another facility on 161, a pattern we see weekly here but rarely on residential runs in Cedar Hill. If your warehouse gate keeps jumping, call (817) 241-4067 for a free estimate.
Yes, and it’s the most common opener complaint we get in Grand Prairie. Builder-grade operators have undersized motors and boards that overheat and shut down when the air temperature passes 105°F, which happens every summer out here. We replace them with a properly rated operator matched to your gate’s weight and cycle count. Call (817) 241-4067 and we’ll tell you what your current opener can actually handle.
Grand Prairie automatic gates must have working entrapment protection: either monitored photo eyes, a safety edge, or both, depending on the operator class and installation year. A gate that reverses on its own or doesn’t stop when it meets resistance is out of compliance and a serious safety risk. We inspect and repair Gate Access Control - Grand Prairie entrapment protection on every automatic gate call, and we’ll show you what your gate needs and why. Call (817) 241-4067 for a free safety check.
Yes, and we do it often. The catch is that most of those gates were never built for automation, so the hinge geometry, post strength, and available power all need a close look before we recommend a system. We also run the power and conduit properly, which is what should have gone in during the original build but usually did not. Call (817) 241-4067 and we’ll inspect your gate and give you a written price for the full automation job, including the power run.
Need a Gate Fixed in Grand Prairie? Call Now
A gate that won’t close isn’t a small thing. It’s a security problem, a liability, and a daily annoyance. Call (817) 241-4067 and you’ll reach a live person, day or night. We’ll set a window, show up on time, and give you a written price before any work starts. Hal Gatewood’s name is on the shop, the shop is down the road, and the 90-Day Done Right Promise is yours in writing. If it’s not done right, one call brings us back, no runaround.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie since 2001.