Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Grand Prairie
Gate parts and welding in Grand Prairie, TX typically runs from $140 for a hinge replacement up to $1,800 for a full post rebuild on a heavy ornamental gate, and most repairs are completed the same day we look at them. We stock the parts that fail most often on Grand Prairie gates: heavy-duty hinges, slide gate bottom rollers, rack sections, and latch hardware. Call (817) 241-4067 and a real person answers, day or night. Hal Gatewood has been welding and fixing gates since 2001, and his crew works Grand Prairie every week.
Why Gatewood Fence & Gate Is Grand Prairie’s Preferred Gate Parts & Welding Company
You won’t get a call center when you phone us. You’ll get Hal or one of his crew, and the person who answers knows the difference between a FAAC operator and a BFT and won’t put you on hold to look it up. Hal’s been owner-operated since 2001, with a published address and a license number anyone can check. The name is on the shop, and the shop is down the road, which is the oldest accountability there is. Show me the gate closing on its own and I’ll show you where it’s failing, and we start there instead of selling you a new one.
Grand Prairie homeowners call us because we fix what other companies want to replace. A sagging gate in your Mira Lagos neighborhood usually means a shifted hinge post, not a bad gate. We weld on site, in your driveway, so the gate never leaves your property. Every repair carries our 90-Day Done Right Promise in writing, not buried in fine print. If it’s not done right, Hal comes back and makes it right. No runaround, no arguing with a dispatcher three states away.
We serve Grand Prairie fast because we’re local. Our Dallas-Fort Worth office coordinates scheduling, and the crew serving your neighborhood knows the streets. Whether you’re off Camp Wisdom Road near the industrial corridor or in a gated community near Joe Pool Lake, we know the gates, the soil, and the HOA rules. That’s what makes Gate Parts & Welding in Grand Prairie different from a company that only stops here on a route.
Our Gate Parts & Welding Services in Grand Prairie
Hinge Replacement
A gate sags in the hinge post, not in the middle, and that’s where we start. Grand Prairie’s black clay soil heaves and contracts with rain-drought cycles, which tilts hinge posts out of plumb and puts torque on hinge welds until they crack at the plate. We cut out the old hinge, weld in a heavier one, and realign the gate so it clears the apron without dragging. Typical hinge replacement in Grand Prairie runs $140 to $320 per hinge, depending on gate weight and steel thickness.
Post Replacement
When a post has sunk more than an inch or two, no hinge is going to fix it. We dig down, set a new post in a deeper concrete footing, and weld the gate back to it. In Grand Prairie’s expansive soil, the footing has to go below the clay’s active zone or you’ll fix the same post twice. Post replacement here runs $450 to $1,200 for standard ornamental gates; heavier commercial posts run more. We quote the price before we dig, in writing, and it doesn’t change at the door.
Rail Repair
That’s the horizontal frame member that cracks when a gate gets pushed or a hinge post shifts. In Grand Prairie’s 1990s tract neighborhoods, we regularly see bottom rails rusted through from years of sitting in pooled water from clay that won’t drain. Cut out the bad section, weld in a new length of steel, grind it smooth, and paint to match. Rail repair runs $180 to $400 in Grand Prairie, more if we’re matching a custom powder coat.
Custom Welding
If a tree limb caved in the top rail, a truck caught the corner, or you’re adding a walk gate into an existing run, we fabricate on site. We weld steel, aluminum, and cast iron, and we match profiles so the repair doesn’t look like a patch. Custom welding in Grand Prairie starts around $160 for small repairs and goes up based on material and time. You’ll see the number before we strike the first arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grand Prairie
We’re certified to service nine major gate brands, and on Grand Prairie jobs we work most often on FAAC, BFT, Linear, and Viking operators. Whether it’s a Viking rack and pinion slide gate at a warehouse off I-20 or a FAAC swing arm on a driveway gate in Lynn Creek, Hal’s crew knows the mounting patterns, limit switch layouts, and failure points for each brand. We stock common Grand Prairie parts on the truck: rack sections, bottom rollers, hinge plates, limit cams, and latch hardware. Most repairs finish the same day we come out.
Common Gate Parts & Welding Problems We See in Grand Prairie Homes
- Hinge posts leaning or sinking from black-clay heave. The Blackland Prairie soil under Grand Prairie expands sharply after rain and shrinks in drought. Fasteners stay tight, but the post moves; the result is a gate that binds, drags, or won’t fully close against the latch.
- Weld cracks at the hinge plate on 1990s ornamental gates. That vintage of tubular-steel driveway gate is reaching end-of-life across the city. When the post shifts even half an inch, repeated stress concentrates at the weld and it cracks. We re-weld and gusset the plate, then realign the post.
- Slide gate bottom rollers jumping track on industrial aprons. In the Great Southwest Industrial District, asphalt aprons in front of rolling warehouse gates buckle under summer heat and loaded truck traffic. The misalignment throws bottom rollers and floor guides out of track, sometimes weekly until it’s resolved.
- HOA gate actuators wearing out from high daily cycles. Communities like Mira Lagos and Lynn Creek run their entry gates around the clock. With that much cycling, the operator’s rack and pinion wear down and the rack sections need welding. We keep commercial-grade rack stock for those jobs.
Pricing for Gate Parts & Welding in Grand Prairie, TX
We Also Serve Cities Near Grand Prairie
If you’re just outside city limits, we cover Euless, Duncanville, Bedford, and Hurst too. A lot of our Grand Prairie customers refer us to family in neighboring towns, and no trip charge applies inside the county. Learn more about our work on the Gate Parts & Welding page, or call (817) 241-4067 to schedule.
Serving Grand Prairie, TX - Our Local Coverage Area
We’re based in the Grand Prairie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Grand Prairie
Will my HOA in Grand Prairie require architectural approval before we replace a damaged gate post or weld a hinge?
Yes, most HOAs in Grand Prairie, including communities like Mira Lagos and Lynn Creek, require architectural review for any change to a gate’s structure, finish, or profile. Repairing in kind, like replacing a damaged hinge with the same size and finish, usually does not need approval, but any change to style, height, material, or color does. We coordinate directly with your management company and can write the work description so the approval process moves quickly. Call (817) 241-4067 and we’ll handle the paperwork with the board.
Why does my swing gate drag or bind every summer even though nothing looks broken?
It’s almost always the Blackland Prairie clay under your post. Grand Prairie sits on expansive soil that heaves and contracts with moisture changes, and summer heat dries the clay unevenly, shifting the hinge post out of plumb. That twists the gate frame just enough to bind against the post or drag on the concrete apron. The fix is not a new gate; it’s re-setting and re-welding the post, then realigning the hinges. Call (817) 241-4067 for a free estimate on the repair.
Can you repair a rack and pinion slide gate at a warehouse in the Great Southwest Industrial District without closing the truck entrance for a full day?
Yes, most rack and pinion slide gate repairs are done same day, and we can weld a new rack section without closing the truck entrance longer than a few hours. We handle heavy industrial slide gates on the I-20/161 corridor regularly, and we carry Viking and FAAC rack sections and bottom rollers so we don’t have to order them mid-job. We schedule around your dock and truck traffic so the gate is back in service by the afternoon. Call (817) 241-4067 and Hal will walk you through what we’d do.
My gate operator still runs but the gate won’t move-could it be a weld failure on the hinge post?
Yes, and we see this exact thing in Grand Prairie’s 1990s neighborhoods. The motor runs, the chain or arm moves, but the gate itself sits still because the hinge post weld has cracked or the post has shifted far enough that the gate is wedged against the catch. The operator is fine; the structure is failing. We check the welds and the post plumb first, then weld and align the hinge so the operator does its job without straining itself to death. Call (817) 241-4067 and we’ll diagnose it same day.
What welding standards do you follow for gate posts in expansive clay soil?
We set footings below the active clay zone in Grand Prairie, which usually means going 30 to 36 inches deep, and we weld posts to a base plate anchored into the concrete with structural anchors, rather than just dropping the post in a hole and hoping. We use 7018 rod for structural steel, gusset hinge plates to spread the load, and run a full weld pass, not a spot tack. If the job is out of plumb when we finish, we re-do it; that’s what the 90-Day Done Right Promise means. You won’t be paying for the same post twice.
Call Hal for Gate Parts & Welding in Grand Prairie
If your gate drags, the latch won’t catch, or you need a weld on a part that shouldn’t have broken this year, call (817) 241-4067. Hal Gatewood will answer the phone himself or get back to you within minutes, and he’ll give you a real number before we schedule anything. We serve Grand Prairie every week, and the person who shows up will have the parts and welder on the truck. Free estimates, no trip charge inside the county, and every job carries the 90-Day Done Right Promise in writing. Call today and we’ll get your gate closing right again.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Grand Prairie and the Dallas-Fort Worth area since 2001.