Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterWhy Arlington Homeowners Choose Ghost Controls Gate Repair
We provide independent Ghost Controls service in Arlington for gate opener repair, from solar swing arms that have lost their charge to slide gate motors that grind but won’t move. What sets our Ghost Controls work apart is that we actually fix these openers rather than condemning them, and our trucks carry the boards, arms, batteries, and transmitters these systems commonly need, so a diagnostic visit often turns into a same-day repair. We’re an independent service provider, not a Ghost Controls authorized dealer, which means we answer to you and to the gate in your driveway, not to a manufacturer’s replacement quota. Call (817) 241-4067 and you’ll get a live person who knows Ghost Controls openers, not a recording.
Why Trust Gatewood Fence & Gate for Your Ghost Controls Gate Repair?
Hal Gatewood has been fixing gates around Arlington since 2001, back when he was still driving a truck with a busted AC and figuring things out one broken hinge at a time. He took welding and metal fabrication courses at Tarrant County College before he ever touched a gate opener for a paying customer, and that background matters when a Ghost Controls arm has been ripped off its bracket by a wind gust or a post has heaved out of the Arlington clay. We see Ghost Controls openers every week, solar and AC-powered, swing and slide, and we’ve learned which failure modes show up on which models and which fixes actually hold up under Texas weather. When the work is done, the 90-Day Done Right Promise is in writing, not buried in fine print, and Hal’s name is on the invoice. That’s the oldest accountability there is.
Common Ghost Controls Gate Repair Problems We Fix in Arlington
Ghost Controls builds dependable openers, but Arlington’s heat, storms, and soil conditions punish them in ways the manufacturer’s manual doesn’t mention. These are the issues we see most often on Ghost Controls systems across Arlington, and the causes behind them:
- TSS1 and TSS1XP solar battery undercharging. In shaded Arlington backyards with mature trees, the solar panel on a TSS1 heavy-duty swing opener never gets enough direct sun to fully charge the 12V battery. The gate starts to operate intermittently, the control box beeps a low-battery warning, and eventually the gate won’t move at all. The fix isn’t always a new panel, sometimes it’s a panel relocation, a wiring repair, or a battery replacement. We test the actual charging current before recommending anything.
- AXDP control board losing travel limits after power surges. Arlington storms bring voltage spikes and brief outages, and the AXDP dual swing opener’s board occasionally drops its programmed travel limits after a surge. The gate then over-travels, stressing the hinges and slamming the leaves closed at the end of their arc. Re-programming the limits fixes the symptom, but we also check the transformer and surge protection so the problem doesn’t return with the next thunderstorm.
- R20 slide gate chain jumping off the sprockets. The R20 slide opener depends on the gate wheels riding true on their track. When those wheels wear, or when the track shifts because the gate posts have moved in Arlington’s expansive clay, the chain or belt loses tension and jumps the sprockets. The opener then spins without moving the gate, and if it keeps trying, it’ll chew up the sprocket teeth. We realign the track, replace the worn wheels, and retension the drive before the opener gets damaged.
- DTP1 wireless keypad losing sync after battery changes. On older DTP1 driveway gate openers, the wireless keypad sometimes drops its sync with the receiver after the keypad’s own battery is replaced. The keypad lights up but the gate ignores it. Owners think the keypad is dead and buy a whole new kit. In most cases we just re-sync the keypad to the receiver, and if the receiver or keypad has genuinely failed, we replace only the failed piece.
- Actuator arm wear and hinge stress on dual swing gates. Ghost Controls actuator arms work hard on Arlington’s ornamental iron gates, especially on heavy gates that have sagged slightly as their posts shifted through the wet-dry clay cycle. The arm’s internal gears wear, the gate travels unevenly, and eventually the arm binds up or strips. We replace the worn arm and address the underlying hinge or post issue, because fixing the arm without the post means you’ll fix it twice.
Ghost Controls Parts & Our Repair-vs-Replace Approach
For Ghost Controls control boards, motors, and receivers, we use genuine OEM parts whenever they’re available through our local distributor or from stock, because aftermarket control boards often lack the exact limit-setting logic and solar-charging behavior these openers depend on. For mechanical wear items like hinge bushings, gate rollers, and post brackets, where the OEM part is backordered or priced unreasonably, we use quality aftermarket components and tell you honestly which is which before we install anything. When a Ghost Controls opener is ten or fifteen years old and the board is fried, the battery is dead, and the arm is sloppy, we don’t patch it together and send you a big invoice. We tell you straight that a motor swap makes more sense than repeated board repairs, and we quote both options so you can decide with the numbers in front of you. The price is agreed before any work starts. Call (817) 241-4067 and we’ll talk through what your opener actually needs.
Our Ghost Controls Service Process - Step by Step
- 1
Diagnosis on site. We test the battery voltage under load, check the solar panel’s actual output, verify travel limits, and inspect the mechanical condition of the arms, hinges, and track. For an AXDP we check both arms independently, because one weak battery can make a healthy opener look broken.
- 2
Upfront quote and your decision. We tell you what’s actually wrong, what it costs to fix it properly, and whether any part of the system is nearing the end of its life. You decide. Nothing gets installed without your say-so.
- 3
Repair or installation with genuine parts. We replace boards, batteries, arms, keypads, or receivers using genuine Ghost Controls parts for electronics and the best available option for mechanical components. We don’t haul your gate away, we fix it in your driveway.
- 4
Full cycle testing. We run the gate through multiple open/close cycles, check the auto-close, the safety reversal, and the battery backup if you have one. If it doesn’t run clean, we don’t call it done.
- 5
90-Day Done Right Promise in writing. Every Ghost Controls repair carries our 90-Day Done Right Promise, no fine print. If it’s not done right, we make it right, one call brings Hal back, no runaround.
Ghost Controls Products We Service & Install in Arlington
We service and install the Ghost Controls product families we see most in Arlington: the TSS1 and TSS1XP heavy-duty solar swing gate openers, the AXDP dual swing gate opener, the R20 slide gate opener, and the DTP1 driveway gate opener with battery backup. We keep common Ghost Controls control boards, actuator arms, transmitters, and sealed 12V batteries on our trucks, so if your opener needs a board swap or a battery replacement, we’re often able to finish the job the same day. Whether your gate is a single swing arm off a side yard or a dual swing at the end of a long driveway, we know these openers and we know what makes them fail in Arlington.
We Also Service These Brands
Ghost Controls is one of nine major brands we service, including LiftMaster, Mighty Mule, and DoorKing alongside FAAC, BFT, Linear, Viking, and Elite. If you have a mixed system or you’re not sure what brand is on your gate, that’s fine, we’ll identify it and give you an honest read on whether it’s worth Gate Repair. We’re gate specialists first, not a single brand’s sales channel.
FAQs - Ghost Controls Gate Repair Service in Arlington
No. We’re an independent Ghost Controls service provider, which means we repair these openers without being tied to Ghost Controls corporate policies or replacement quotas. We recommend what’s best for your gate and your budget, not what a manufacturer’s program tells us to push. Our warranty on our work is the 90-Day Done Right Promise, in writing on every job.
This is almost always a power surge or brief outage hitting the control board, and it’s very common in Arlington, where thunderstorms roll through with voltage spikes. The board loses its programmed limits and the gate over-travels or stops mid-cycle. We re-set the travel limits and check whether the opener has proper surge protection. If the board has been hit too hard too many times, we’ll tell you that replacement is the real fix, not another re-programming. Call (817) 241-4067 and we’ll check it.
Yes. We test the panel’s actual output before recommending replacement, because a weak battery or a bad connection can look exactly like a dead panel. If the panel has failed or cracked, or if it’s so shaded that it can’t keep up with the opener’s draw, we replace it and reposition it where it’ll get the most usable sun in your specific Arlington yard.
A solid red light on a Ghost Controls keypad usually means the keypad has lost its sync with the receiver, often after a battery change or a power interruption. The keypad still has power, but the receiver doesn’t recognize it anymore. We re-sync the keypad to the receiver, and if the receiver itself has failed, we replace the receiver rather than the whole kit. In most cases it’s a ten-minute fix, not a new keypad.
Yes, on most Ghost Controls slide gate systems we can add or upgrade a battery backup so the gate still opens during a power outage. Arlington gets enough storms and ice events that a battery backup is worth having if your gate is the only way in or out, that’s the kind of thing we’re happy to discuss honestly. Call (817) 241-4067 for a free estimate.
Slamming at the end of travel usually means the opener’s limit settings have slipped or been lost, so the arm doesn’t slow down before the gate reaches its stop. On a dual swing AXDP it can also happen when one arm’s battery is weak and the board is compensating. Left alone, that slamming bends hinges, cracks welds, and kills actuator arms. We’ll reset the limits and check both arms and batteries, and the gate will close smooth instead of slamming.
Ghost Controls gate repair in Arlington typically runs $180 to $340 for a board re-programming, battery replacement, or limit reset, and more when an actuator arm or control board has to be replaced. The exact price depends on your model, what’s actually failed, and whether the post or hinge underneath has also moved. We quote the full price before any work starts, and we offer $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for an exact quote, estimates are free.
Book Your Ghost Controls Service in Arlington, TX
If your Ghost Controls opener is acting up, beeping, stalling, or not moving at all, call (817) 241-4067. A live person answers, day or night. We’ll set a time, show up when we say we will, and give you an honest price before any work begins. Just give me a call, I’ll pick up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.