Ghost Controls Gate Repair in Arlington, TX

Ghost Controls Gate Repair in Arlington, TX | Gatewood Fence & Gate

Ghost Controls gate repair in Arlington usually runs $185 to $385 for common fixes like limit switch resets, actuator arm replacement, or control board work. We’re an independent Ghost Controls sales & service shop, which means we fix these operators every week across Arlington’s shifting clay, and we stock the parts to do most jobs same-trip. The thing that sets our Ghost Controls work apart here: we know Arlington soil. Call (817) 241-4067 and a live person answers.

Call (817) 241-4067

Why Arlington Residents Choose Us for Ghost Controls Service

Hal Gatewood has been doing Gate Repair in Arlington since 2001, back when he was driving a truck with a busted AC and figuring things out one broken hinge at a time. He grew up near Pantego on the southwest side, took welding and metal fabrication at Tarrant County College, and he’s the one who signs every invoice. We’re not a franchise and we don’t route calls to somebody three states away. When your Ghost Controls actuator arm won’t move, you get Hal or one of his crew at your driveway, not a rotating cast of subcontractors.

We service the full Ghost Controls line and we don’t guess. We keep factory-spec boards, limit assemblies, and actuator arm clevis pins on the truck for the common failures we see in Arlington. If a part isn’t on the truck, we source it locally or overnight it. The 90-Day Done Right Promise comes in writing with every job. If it’s not right, one call brings us back, no runaround.

Common Ghost Controls Gate Repair Problems We Solve in Arlington

• Limit switch drift after the gate sags. Arlington’s Blackland Prairie clay heaves every spring, and a post that shifts even a quarter-inch changes the gate’s travel arc. The operator keeps running past its stop, the limit switch drifts out of calibration, and the gate starts smacking the post or reversing mid-cycle. We re-set the stops and, when the post is the real problem, we fix the post instead of just reprogramming around it.
• Water intrusion into the control board. Arlington ice storms crack housing seals on pedestal-mounted Ghost Controls units, and the next thaw lets moisture into the board. Symptoms are random reversing, dead keypads, or the gate moving a few inches and quitting. We dry, clean, and reseal the enclosure, then replace the board only if corrosion has gone too far.
• Actuator arm stress fractures. A wood gate that warped over an Arlington summer over 100°F fights the operator on every cycle. The actuator arm takes the load, the clevis pin shears or the arm cracks, and the gate stops halfway. We replace the pin or arm, then we fix the warp or alignment so the new part doesn’t eat itself in six months.
• Premature motor failure near the Entertainment District. Driveway gates around AT&T Stadium and Globe Life Field run hundreds of open/close cycles on game days. The Ghost Controls gear teeth strip long before the housing looks worn. If the gearbox is sound, we replace the gear. If it’s shot, we’ll tell you straight and quote a new operator.
• Ghost Controls keypad works at the house but not at the gate. That’s almost always wiring, not the keypad itself. Arlington’s clay shifts, the conduit or low-voltage line gets stressed, and the signal drops. We trace the run, find the break or corrosion, and splice it properly.

Ghost Controls Service in Arlington: What Local Conditions Mean for Your Equipment

Arlington sits on Blackland Prairie expansive clay that shrinks and heaves dramatically through the region’s wet-dry cycle. Gate posts on the east and south sides of town shift a quarter-inch in a single spring, and that quarter-inch is enough to trip Ghost Controls obstruction sensors over and over. We keep a database of Arlington subdivision soil profiles so we can predict which operators will need limit resets after the next downpour. On Highbank Drive in the Wimbledon subdivision, our tech found a Ghost Controls TDS2 dual-swing system whose east gate had sagged onto the closing pawl, cracking the actuator arm clevis pin. We pulled the post, re-set it in compacted road-base fill with a concrete collar, replaced the clevis pin, and recalibrated the limit stops. The gate clears the safety loop now, even after a week of rain. That’s the difference between a generic Ghost Controls service call and an Arlington-specific one. We know which subdivisions fight the soil hardest and we stage repairs against the wet-dry calendar.

Ghost Controls Models & Products We Service in Arlington

We work on the Ghost Controls TSS1 single-swing kit, the TDS2 dual-swing system, the AXS1 solar-compatible actuator arm, and the GTH1 heavy-duty slide operator. Those four cover most residential installations in Arlington, from the ornamental iron gates in east-side HOAs to the wood privacy gates on 1970s and 1980s tract homes. For a failed board, limit assembly, or motor gear, we use factory-spec Ghost Controls parts. For simple hardware like clevis pins, gate brackets, and hinge shims, we use proven equivalent-grade aftermarket pieces to keep turnaround fast. We repair before we replace whenever the gearbox and housing are still sound. Multiple boards and sensors failed at once? We’ll say so, and we’ll quote a full replacement honestly.

Ghost Controls Service Pricing in Arlington

FAQs - Ghost Controls Gate Repair in Arlington

Service Areas Near Arlington

We serve all of Arlington and the surrounding cities. If you’re in Fort Worth, we handle Ghost Controls work there too - see Ghost Controls service in Fort Worth. To the northwest, Ghost Controls service in Colleyville covers that area. We also work in Kennedale, Grand Prairie, and Irving. Our full Arlington service area page has the details.

Book Your Ghost Controls Service in Arlington Today

Your Ghost Controls gate isn’t going to heal itself, and Arlington clay isn’t going to stop moving. Call (817) 241-4067 for a free estimate. Same-day service is available for most Ghost Controls repairs in Arlington. Just give me a call - I’ll pick up.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.