Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGhost Controls Gate Repair in Fort Worth, TX | Gatewood Fence & Gate
If your Ghost Controls opener is acting up in Fort Worth, our Gate Repair in Fort Worth team can fix it. We’re an independent service provider, not a factory repair center, and we work on these openers every week across Tarrant County. The thing that makes our Ghost Controls work different here is simple: we know how Blackland Prairie clay shifts gate posts and throws these openers out of whack, and we fix the post before we touch the opener. Call (817) 241-4067 for a free estimate.
We’ve been repairing gates in Fort Worth since 2001, and we carry OEM Ghost Controls arms, boards, and remotes on the truck. We also keep heavier aftermarket stainless brackets for the rust-prone pivot hardware that factory parts don’t handle well in our soil. If you live in a Walsh Ranch subdivision or on a ranch spread near Aledo, we know your gate sees different abuse than one in a Dallas suburb, and we service both. Our shop is located in Arlington, close enough that we can Ghost Controls sales & service calls across the metro without making you wait a week.
Why Fort Worth Residents Choose Us for Ghost Controls Service
Hal Gatewood has been fixing gate openers since 2001, back when he was driving a truck with a busted AC and learning one broken hinge at a time. He took welding and metal fabrication courses at Tarrant County College before he ever touched a gate opener for a paying customer. That background matters when your Ghost Controls arm is binding because the post moved an inch out of plumb. A parts swapper replaces the arm. Hal re-sets the post, welds a steel collar on it, and then adjusts the opener so it actually stays fixed.
We’re a locally owned Fort Worth-area shop, not a franchise or a call center. When you call, a live person picks up, 24/7. You won’t get a voicemail or a three-state dispatch queue. We also put our 90-Day Done Right Promise in writing on every job. If something isn’t right, one call brings us back. That’s the whole promise.
Common Ghost Controls Gate Repair Problems We Solve in Fort Worth
- Limit switch drift from summer heat. Fort Worth summers push past 100°F for weeks. The limit switches inside Ghost Controls arms expand and contract with that heat, and we see openers overshoot the closed position or reverse mid-travel in August. Replacing a drifted limit switch and recalibrating the travel fixes it, but if the post moved too, the switch will drift again next summer unless the post gets addressed first.
- Motor capacitor failure on HOA entry gates. High-cycle use at community entry gates in places like Walsh Ranch and Chapel Creek burns out motor capacitors. When a Ghost Controls opener cycles hundreds of times a day, the capacitor is the first component to fail. We replace it with an OEM part when available and check the cycle count so you know if the opener is close to end of life.
- Freeze-thaw cracking of control board housings. North Texas ice storms are rough on gates exposed in Benbrook and far-west Fort Worth. Water gets into the housing, freezes, expands, and cracks the plastic. Then the board shorts out. We replace the housing with a better-sealed aftermarket part and coat the board connections so the next freeze doesn’t kill it.
- Clay heave throwing TDS2 arm geometry out of square. Blackland Prairie clay swells with spring rain and shrinks in drought. That moves gate posts enough to bind the arm and cause premature gear wear in Ghost Controls dual gate openers. We re-shim the footings and add steel anti-rotation collars before recalibrating, because adjusting limits on a leaning post means you’ll be back out there in six months.
- Dead battery backups after extended outages. When ice storms knock out power, the battery backup in your Ghost Controls opener may be the only thing keeping the gate usable. We test battery health, replace aging cells, and make sure the charging circuit is doing its job before the next storm. This matters more on the western edge of Fort Worth, where power restoration can take longer after bad weather.
Ghost Controls Service in Fort Worth: What Local Conditions Mean for Your Equipment
Fort Worth sits right at the line where suburbia gives way to ranch country, and that changes how we stock our trucks and how we approach Ghost Controls repair. Work a gate on the east side of Fort Worth, and you’re dealing with HOA-mandated ornamental iron and automated entry gates in master-planned subdivisions. Head west toward Weatherford and Aledo, and you’re welding pipe-and-cable livestock gates on working ranch property. We keep both kits on the truck: OEM Ghost Controls parts for residential openers and a full pipe-gate and livestock-latch setup for the ranch side, thanks to our Fort Worth Gate Installation background. It’s not unusual to recalibrate a TDS2 on a Walsh Ranch community entry in the morning and weld a broken pipe-gate hinge on a 20-acre horse property in the afternoon. Most Dallas-side competitors don’t carry both. We do because Fort Worth demands it.
The clay soil is the reacher. Fort Worth’s Blackland Prairie clay can shift a gate post an inch or more laterally as it swells and contracts through the seasons. Ghost Controls openers are less forgiving of frame racking than chain-drive ranch units, so before we ever touch the limit switches, we’re checking whether the post moved. In Walsh Ranch, our tech was called to a community-entry double gate where a TDS2 opener was randomly reversing at mid-travel. We found the right gate post had been pushed out of plumb by an inch, binding the arm just enough to shift the limit assembly. After re-setting the post in a deeper concrete footing and replacing a burned-out limit switch, we recalibrated both arms and added stainless post collars. That gate hasn’t reversed since.
Ghost Controls Models & Products We Service in Fort Worth
We service the full Ghost Controls lineup: the TDS2 series for dual swing gates, the TSS1 series for single swing gates, the AXDP advanced dual opener, and the AXD heavy-duty linear slide. We install genuine Ghost Controls OEM arms, control boards, and remotes when they’re available. For rust-prone pivot brackets and mast hardware, we use thicker aftermarket stainless steel. Factory parts in those spots don’t survive Fort Worth’s clay and ice as well as they should, and we’d rather put on a part that lasts than one we’ll replace again in two years. If your opener is over 7 years old and has two failing subsystems, we’ll tell you plainly that replacement makes more sense than stacking repairs.
Ghost Controls Service Pricing in Fort Worth
Ghost Controls repair in Fort Worth typically runs $150 to $350 for most component replacements: limit switches, capacitors, control boards, and remotes. Full opener replacement, including arms and installation, usually falls between $700 and $1,400 depending on the model and whether the post needs re-setting. The clay work adds cost when it’s needed, and there’s no honest way around that: if your post is leaning, fixing the post is the only fix that lasts. We quote every job before we start, and the price we quote is the price you pay. There’s also $40 off any repair over $200, no trip charge inside the county, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a free estimate. We’ll talk through what’s actually wrong, not what we can upsell.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Ghost Controls Gate Repair in Fort Worth
That’s clay heave. Fort Worth’s Blackland Prairie soil swells after rain, pushing your gate post out of alignment and binding the opener arm. The arm then reads the resistance as an obstruction and reverses. We fix it by re-shimming the post footings, adding steel anti-rotation collars, and recalibrating the opener. Call (817) 241-4067 and we’ll check your post before we touch the electronics.
Yes. We do ranch and pipe gates regularly west of Fort Worth and around Benbrook. The key is setting the post deep enough to handle clay movement and using stainless hardware that won’t seize after a freeze. We’ll assess the gate weight, post condition, and clearance on site and give you a written estimate.
Water intrusion into the control board housing is usually the culprit after a freeze. Ice expands, cracks the plastic, and shorts the board that receives remote signals. We replace the housing with a better-sealed aftermarket part and protect the board connections so the next ice storm doesn’t kill it again. Call (817) 241-4067, and we’ll get it sorted.
No. Ghost Controls does not have a factory repair center in Fort Worth or anywhere in Tarrant County. We’re an independent service provider, not manufacturer-affiliated or authorized, and that lets us use the right parts for our local conditions: OEM when it matters, thicker stainless when factory parts won’t survive the soil and weather here.
At least 1/2 inch of lateral clearance on the sliding gate track is what we recommend for Fort Worth summers. Metal expands in 100°F-plus heat, and a gate with tight clearance will bind when it expands. We also verify the guide rollers aren’t worn, because a worn roller makes heat binding worse. Call (817) 241-4067 for an exact clearance check on your gate.
Service Areas Near Fort Worth
We handle Ghost Controls gate repair throughout the Fort Worth area, including Fort Worth service area proper, Arlington, Colleyville, Kennedale, and Grand Prairie. We also run calls out to Ghost Controls service in Colleyville and Ghost Controls service in Arlington. If you’re in one of the smaller communities between Fort Worth and the Tarrant County line, give us a call and we’ll tell you if we can get there. Most of the county is no trip charge.
Book Your Ghost Controls Service in Fort Worth Today
If your Ghost Controls opener is reversing, grinding, or refusing to open, call (817) 241-4067. We answer live, 24/7, and same-day service is available for most repair calls in Fort Worth. You’ll get an honest diagnosis and a price before any work starts. Just give me a call - I’ll pick up.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Fort Worth since 2001.