Electric Gate Repair in Arlington, TX

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Electric Gate Repair in Arlington, TX

Our Gate Repair services in Arlington typically cost between $150 and $450 depending on whether the issue stems from a faulty control board, sensor misalignment, or motor failure. Most common electrical gate issues, such as a gate that refuses to close or one that moves erratically, are resolved in a single visit when you have the right parts on the truck. If your gate has stopped responding or is making grinding noises, you need to call (817) 241-4067 to get a technician out to your property before the issue worsens.

At Gatewood Fence & Gate, we believe in fixing what is broken rather than pushing for an expensive replacement. I have been doing this work since 2001, and I have seen plenty of homeowners in Arlington get sold a brand-new motor when all they really needed was a sensor adjustment or a new capacitor. That is not how we operate. When you call us, you get a real person on the line, not a call center. We handle your Gate Repair in Arlington with the same care we would use on our own driveways.

We are locally owned and owner-operated, which means my name is on the shop and on every invoice. We handle everything from on-site welding to complex circuit board troubleshooting for major brands like FAAC, BFT, and Linear. If you are dealing with a gate that won’t budge, give us a call. We offer a 90-Day Done Right Promise on every job, and we never charge a trip fee if you are inside the county.

When You Need Electric Gate Repair

You generally know the gate is failing before it stops working entirely. In our experience, these are the signs that a gate is ready for professional attention:

• The gate stops halfway or reverses unexpectedly: This is often a safety sensor issue. In the Arlington area, the intense summer heat and shifting soil can cause posts to move just enough to throw your photo-eyes out of alignment.
• The motor hums but the gate doesn’t move: This usually points to a capacitor failure or a stripped gear. Do not force the gate manually if it feels stuck, as you could damage the internal drive components further.
• The gate opens or closes on its own: This is a major security risk and usually indicates a short in the control board or a malfunction in the receiver.
• Visible rust or damage on the hinge posts: A gate sags in the hinge post, not in the middle. If your gate is dragging on the driveway, the motor is working twice as hard to move it, which will burn out the operator prematurely.
• The gate makes grinding or screeching noises: This is metal-on-metal wear. We see this often when the lubrication has dried out or when the chain has lost its tension.

A note on safety: If your gate system is powered by electricity, it is carrying enough current to cause serious injury. The control boxes contain high-voltage wiring, and the mechanical arms or chains involve high-tension movement that can crush fingers or cause severe pinch injuries. If you see smoke, smell burning plastic, or notice exposed wiring, cut the power at the breaker if you can do so safely and call us immediately. Do not attempt to rewire the control board yourself.

Our Electric Gate Repair Process

We follow a straightforward, repair-first philosophy. My goal is to get your gate running smoothly again without unnecessary costs. Here is how we handle a service call:

1. The Initial Assessment: When we arrive, we do not start by guessing. We check the power supply, the control board diagnostics, and the physical alignment of the gate leaves. We look for the root cause, not just the symptom.
2. On-Site Welding and Fabrication: If your gate is sagging or a hinge has broken, we do not haul your gate off to a shop. We bring the welding equipment to your driveway and make the repair right there, saving you time and money.
3. Testing the Safety Sensors: Your safety sensors are the most critical part of the system. We test them to ensure they stop the gate immediately when an obstruction is detected, ensuring your system meets current safety standards.
4. Final Adjustment and Lubrication: After the mechanical or electrical repair is finished, we lubricate all moving parts and cycle the gate multiple times to ensure it stops, starts, and latches exactly where it should.
5. The 90-Day Done Right Promise: Before we leave, we make sure you are satisfied with the operation. Our work is backed by our written promise, so if something isn’t right, one call brings us back.

Electric Gate Repair Pricing in Arlington

We believe in upfront pricing. You will never be surprised by a bill at the door. For full details, see How Much Does Gate Repair Cost in Arlington, TX? (2026 Price Guide); the following ranges give you an idea of what to expect for common repairs in the Arlington area. If your repair is over $200, we offer a $40 discount, and we provide a permanent 10% discount for seniors and veterans.

• Sensor Alignment and Cleaning: $150 - $200
• Capacitor or Minor Electrical Component Replacement: $180 - $300
• Control Board or Receiver Repair: $250 - $450
• On-Site Welding and Hinge Repair: $200+ (Depends on the extent of the damage)

We provide free second opinions on any written estimate you have received from another company. If you feel like you are being overcharged for a simple repair, call (817) 241-4067 and let us take a look.

FAQs - Electric Gate Repair

Is it cheaper to repair or replace my electric gate motor?

In most cases, it is significantly cheaper to repair the motor, especially if the issue is a capacitor, a sensor, or a circuit board component. I have been fixing these units since 2001, and I often find that a motor labeled as “dead” by national companies just needs a specific part replaced. We only recommend full replacement if the motor housing is physically compromised or if the cost of parts exceeds the value of a new unit, which is rare. Call (817) 241-4067 for an honest assessment of your specific system.

Can you fix my gate today?

We do our best to offer same-day or next-day service, as we know that a broken gate is more than just an inconvenience; it is a security risk for your home. Because we are locally owned and answer our own phones 24 hours a day, we can often schedule a visit faster than the larger outfits that rely on dispatch queues. If you have an emergency, give us a call, and we will tell you exactly when we can be there.

Do you work on all gate brands?

We are certified to service nine major gate brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we have been in the business for over 29 years, we have worked on nearly every operator model installed in Arlington homes. If you have a brand not listed here, give us a call, and we can likely help you with the mechanical components, even if the electronics are proprietary.

Why is my gate dragging on the driveway?

A gate that drags on the ground is almost always caused by a failing hinge post or a settling foundation, not by the gate motor itself. If you ignore this, the friction will eventually strip the gears inside your motor, turning a simple hinge repair into a much more expensive motor replacement. We can fix the hinge, reinforce the post, and get the gate lifting properly again. Call (817) 241-4067 to schedule a free estimate and stop the damage before it gets worse.

When you need reliable, honest gate repair, you don’t need a national brand. You need someone who knows the neighborhood and stands behind their work. We are ready to help with any electric gate issue you might be facing. Call (817) 241-4067 today for a free estimate and to learn more about our home services.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.