Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHow Much Does Gate Repair Cost in Arlington?
For most homeowners in Arlington, TX, gate repair typically costs between $150 and $450, depending on whether the issue is a simple hinge adjustment or a more complex motor or electrical failure. If you are dealing with a sagging gate or a gate that won’t close properly, we can usually fix the issue on-site the same day, getting your security back in order without the need for a full replacement.
Gate Repair Cost Breakdown (2026)
We do not believe in hidden fees or changing prices once we arrive at your driveway. When you call us, we provide a clear, upfront estimate. Below is the breakdown of what you can expect for standard gate repair services in the Arlington area.
| Service Type | Estimated Cost Range |
|---|---|
| Hinge & Latch Adjustment (Minor) | $150 - $225 |
| On-Site Welding/Structural Patch | $250 - $450 |
| Gate Operator/Motor Diagnostic & Reset | $175 - $300 |
| Electrical Board or Sensor Repair | $300 - $600 |
| Post Realignment (Digging/Resetting) | $400 - $850+ |
These numbers reflect the reality of the market here in Arlington. Please keep in mind that we offer a 10% discount for seniors and veterans on all repairs. If you have a written estimate from another company, we are happy to provide a free second opinion before you spend your hard-earned money. Call (817) 241-4067 to speak with a real person and get an honest assessment of what your gate actually needs.
What Affects Gate Repair Pricing in Arlington?
Every gate has a personality, and every driveway in Arlington has its own set of challenges. When we look at a repair, we aren’t just looking at the gate; we are looking at how the ground shifts, how the humidity affects the steel, and how the gate has been maintained over the years.
* Structural Integrity: If your gate is dragging on the concrete, the issue is rarely just the gate. It is usually the hinge post. If the post has shifted due to the clay soil common in North Texas, we have to address the foundation, not just the gate panel.
* The “Repair-First” Philosophy: Many companies will tell you to replace an entire gate system because a hinge is worn out. We believe in fixing the problem, not the profit margin. On-site welding allows us to repair specific joints or sagging points without hauling your gate off to a shop, which keeps your costs significantly lower.
* Electrical Complexity: If your gate motor is acting up, we first check the sensors and the control board. Sometimes it is a simple alignment issue caused by high winds or debris, which is much cheaper than replacing the operator entirely.
* Brand Compatibility: We are certified to service nine major brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Having the right parts on hand means we don’t have to charge you for multiple trips or specialty ordering if we can avoid it.
* Accessibility and Safety: If a gate is stuck in a position that blocks traffic or creates a security risk, it becomes a priority. Because we are locally owned and owner-operated, we don’t have a corporate dispatch queue. When you call (817) 241-4067, you get a live person who understands that your gate is more than a piece of metal-it is your security.
How to Save on Gate Repair
You don’t need a “deal of the day” to get a fair price. We believe in simple, honest pricing that remains consistent year-round. If you are looking to keep your costs down, consider these practical steps.
First, keep your gate clean. In Arlington, our humidity and occasional severe weather can cause rust and debris buildup in tracks and hinges. A simple annual inspection can prevent a $500 motor repair from becoming a reality.
Second, take advantage of our standing offers. We provide $40 off any repair over $200. This is not a coupon you have to hunt for; it is just how we do business. We also charge no trip fee inside the county. If you are unsure if your repair qualifies, call us at (817) 241-4067. We will talk you through the symptoms over the phone.
Third, don’t ignore the early signs. A gate that makes a grinding noise or pauses halfway through closing is telling you something is wrong. Fixing a small misalignment today is much cheaper than replacing a motor that burned out because it was straining against a crooked gate for six months.
FAQs - Gate Repair Cost
How much does it cost to fix a sagging gate in Arlington?
Most sagging gate repairs in Arlington cost between $200 and $450. A gate typically sags because the hinge post has moved or the hinge itself has worn down, and we can usually fix this by re-welding or reinforcing the hinge point on-site. Call (817) 241-4067 for an exact quote.
Is it cheaper to repair or replace a gate motor?
In 90% of cases, it is significantly cheaper to repair the motor, which usually costs $175 to $300, compared to a full replacement which can run into the thousands. We always try to fix what you have before suggesting a new unit, backed by our 90-Day Done Right Promise.
Can you come out to fix my gate today?
We answer our phones 24/7, and we prioritize urgent repairs, especially those that leave your home insecure. While we cannot guarantee a specific arrival time without knowing your location, we are locally based and can often get to Arlington homes quickly to assess the damage.
Do you charge for estimates?
We do not charge for an estimate, and we also offer a free second opinion on any written estimate you have received from another company. We believe you should know exactly what you are paying for before any work begins.
What does the 90-Day Done Right Promise cover?
Our 90-Day Done Right Promise means that if the repair we performed fails within 90 days, we come back and make it right-no runaround, no excuses. It is written on every invoice because we stand by the work we do.
Why Choose Gatewood Fence & Gate for Your Repairs?
When you have been fixing gates since 2001, you learn that the work is not about the metal-it is about the people behind the gate. I have seen too many homeowners in Arlington get burned by companies that promise a low price over the phone and then hit them with a “service fee” or “trip charge” the moment they pull into the driveway. That isn’t how we operate.
My name is Hal Gatewood, and my name is on the shop. When you call us, you are not reaching a call center three states away. You are reaching someone who knows the local codes, understands our soil conditions, and knows how to weld a joint so it actually holds. We don’t have a “dispatch queue” because we don’t have a dispatch office-we have a local shop, a truck, and a commitment to doing the job right the first time.
If your gate is dragging, the motor is humming, or the latch just won’t catch, don’t let it turn into a bigger problem. A gate that won’t close is a security risk for your home and your family. We are ready to help.
Pricing reflects the Arlington market as of 2026. Gatewood Fence & Gate offers free estimates - call (817) 241-4067.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.
What Our Customers Say
"Driveway gate had been dragging for two years and two other companies told me the whole thing needed replacing. Hal reset the posts, rehung it and it swings like it did when it went in. A fraction of the price of a new one."
- Hollis Amberly"Hundred and forty feet of cedar privacy fence, all posts set in concrete, all of it dead level on ground that is anything but. He walked the line with me twice before a single hole was dug."
- Judith Stallworth"He builds the gates himself in his own shop. You can go and look at it. That is not something you can say about the outfits that just order a panel in."
- Doreen Whitfield