Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Realignment in Arlington, TX
Gate realignment in Arlington typically costs between $150 and $350, depending on the severity of the sag and whether the hinge posts need structural reinforcement; for a detailed breakdown, see How Much Does Gate Repair Cost in Arlington, TX? (2026 Price Guide). If you are struggling to latch your gate or noticing the frame dragging against the concrete, call us at (817) 241-4067 to have me come out and take a look.
Most our Gate Repair services competitors in Arlington want to sell you a brand new gate the moment they see a sag. That is not how we operate at Gatewood Fence & Gate. I have been fixing gates since 2001, and I know that a gate usually fails because of the hinge post, not the gate itself. If your gate is scraping the driveway or refusing to latch, you do not necessarily need to tear it all down. You need a specialist who understands the physics of weight distribution, someone who will bring a welder to your driveway rather than hauling your equipment off to a shop.
When I show up, I am not looking to upsell you on a replacement. I am looking to fix the alignment so you can stop fighting with your entry every time you pull into the driveway. Whether you are dealing with a heavy wrought iron gate near Lake Arlington or a sagging wood privacy gate in a historic area like Park Row, the problem usually comes down to foundation shift or hinge fatigue. We have been doing Gate Repair in Arlington for over 29 years, and we stand behind every realignment with our 90-Day Done Right Promise. If it is not right, I come back and make it right.
When You Need Gate Realignment
A gate that does not close properly is more than just an inconvenience; it is a security risk. You might think it is just a minor adjustment, but ignoring the signs often leads to bent hinges, stripped motors, or a gate that eventually drops entirely. Here is what to look for in your own yard:
- The Dragging Edge: If your gate leaves a crescent-shaped scratch in the concrete or asphalt of your driveway, the hinge post has likely shifted. This is common in Arlington soil, which can expand and contract significantly during our hot, dry summers.
- The Latch Gap: When the latch no longer meets the strike plate, you are forced to lift the gate every time you want to lock up. This puts immense strain on the gate frame and the operator arm.
- Visible Hinge Separation: Look at the gap between the hinge leaf and the post. If you see daylight or the screws are backing out, the hardware is failing. We often see this with older systems that were not reinforced during the original installation.
- Motor Strain: If you have an automatic gate, listen to the motor. If it sounds like it is struggling or groaning when it moves the gate, it is fighting against the weight and friction of a misaligned frame. This will kill a perfectly good motor from a brand like FAAC or Linear in record time.
- The “Spring-Back” Effect: If you let go of the gate and it swings back open or slams shut on its own, it is not level. A properly aligned gate should stay exactly where you leave it.
If you notice these issues, do not wait until the gate collapses. Call (817) 241-4067. We offer a free second opinion on any written estimate you have already received. If someone told you that you need a total replacement, let me take a look first.
Our Gate Realignment Process
I do not believe in “patching” a gate. Realignment is a structural repair, and it has to be done with the right tools and the right mindset. When you call Gatewood Fence & Gate, this is how I handle the job:
- Assessment of the Hinge Post: I start by checking the post that holds the weight. If the post is leaning, no amount of adjustment to the gate hinges will fix the problem. We check for concrete rot and soil erosion around the base.
- On-Site Welding: Most companies will try to bolt on a quick fix that loosens within a year. I bring my welding equipment to your property. We weld the hinges directly to the frame and post where necessary, creating a bond that is stronger than the original factory setup.
- Weight Distribution Correction: A gate sags because the weight is pulling against the weakest point of the frame. I adjust the tension and, if needed, install a diagonal brace or a turnbuckle system to redistribute the load back to the hinge post.
- Hardware Overhaul: If your hinges are worn out or undersized for the weight of your gate, I replace them with heavy-duty, sealed ball-bearing hinges. We use professional-grade hardware that is rated for the specific weight of your gate material.
- Final Calibration: Once the alignment is set, I test the gate through ten full cycles to ensure it sits flush against the strike plate every single time. I won’t pack up my tools until the gate swings smooth and latches without you having to lift or push it.
The name is on the shop, and the shop is down the road. That is the oldest accountability there is. You won’t get a dispatch queue or a chatbot when you call us; you will get a live person who actually knows how a gate is built.
Gate Realignment Pricing in Arlington
I believe in upfront pricing. You should never be surprised by the bill when the work is finished. While every gate is different, our pricing is transparent and consistent. We do not have “trip charges” if you are inside the county, and we offer a permanent 10% discount for seniors and veterans.
| Service Type | Typical Price Range |
|---|---|
| Minor Hinge Adjustment & Lubrication | $150 – $225 |
| Post Reinforcement & Structural Realignment | $250 – $450 |
| Heavy-Duty Hinge Replacement & Welding | $300 – $550 |
| Full Frame Re-Squaring | $400+ (Requires site inspection) |
If your repair total comes to over $200, I will take $40 off the final bill. That is my standing offer. If you have a written estimate from another company, I will give you a free second opinion. Just call (817) 241-4067 and let me know what you are looking at. If I can save you from an unnecessary replacement, I will.
FAQs - Gate Realignment
Is it cheaper to repair a sagging gate or just replace it?
In 90% of cases, it is significantly cheaper to repair a sagging gate than to replace it, as explained in How Much Does Gate Repair Cost in Fort Worth, TX? (2026 Price Guide). Most gates sag because of hinge failure or post shifting, which can be fixed with welding and structural bracing for a fraction of the cost of a new installation. Call (817) 241-4067 for an honest assessment before you commit to a full replacement.
Can you fix an automatic gate that isn’t closing straight?
Yes, but we have to address the physical alignment before we touch the motor. If your gate operator, such as a BFT or Viking unit, is struggling to close the gate, it is usually because the frame is dragging or the hinges are seized. We fix the physical alignment first, which often resolves the “motor” issue entirely.
What if my gate hinges are welded and I can’t adjust them?
That is exactly what I specialize in. When hinges are welded incorrectly or have broken, you need a technician who brings a welder to your driveway. I can cut, grind, and re-weld your hinges into the correct position so the gate hangs level again, which is often a permanent fix compared to bolting on temporary hardware.
How quickly can you come out to fix my gate?
We prioritize repairs that leave your home insecure. If your gate won’t close or lock, let us know when you call (817) 241-4067, and we will do our best to get to your property as quickly as possible. We are locally owned and owner-operated, so you are not waiting on a national dispatch center to approve a work order.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington since 2001.