Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Hurst
Gate access control in Hurst means one thing most weeks: a keypad, remote, or phone-entry system mounted on a gate that sits on Blackland Prairie clay. That clay swells after spring rain and shrinks through summer drought, and the gate posts move with it. When the post moves, the latch misses, the operator binds, and the access system gets blamed. We’ve been fixing exactly that since 2001, and we answer the phone 24/7. Call (817) 241-4067 for a straight answer and a free estimate.
Why Gatewood Fence & Gate Is Hurst’s Preferred Gate Access Control Company
Hurst homeowners have our number saved because we show up when we say we will, and we Gate Access Control work the way it should be done: diagnose first, fix the real problem, no swapping parts that don’t need swapping. Hal Gatewood’s name is on the shop and on every invoice. That’s not a marketing line. It’s the oldest accountability there is.
We work the established subdivisions along Brown Trail, Precinct Line Road, and through the Hurst Park and Mayfair neighborhoods every week. The calls we get from Hurst run a pattern: older ranch homes, brick and wood gates built in the 1960s and 1970s, with operators added years later. When a keypad goes dead on a 50-year-old gate, the fix almost never starts at the keypad. It starts at the post underneath it.
Every job carries our 90-Day Done Right Promise in writing. If it’s not done right, we make it right. One call brings us back, no runaround. And when you call, a live person answers. Not a voicemail, not a chatbot, not a queue. Someone who knows what a Hurst gate looks like.
Our Gate Access Control Services in Hurst
We handle the whole access-control picture for Hurst gates: keypads, remotes, phone entry, card readers, video intercoms, and the smart-access systems people are adding to older homes. But in Hurst, three services matter most because of how the city is built and how the soil behaves.
Keypad Entry
Keypad entry is the most common request we get from Hurst homeowners, especially on ranch homes with long driveways off Brown Trail and Pipeline Road. We install weather-sealed keypads that survive Tarrant County’s summer heat and winter ice storms, and we wire them to operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. A keypad added to an existing gate operator in Hurst typically runs $350-$700 parts and labor, depending on whether we’re tying into an existing opener or replacing the whole access loop.
Remote Control
Remotes fail in predictable ways here. The clips break, the buttons wear out, or the frequency drifts on older openers after years of 100°F attic-adjacent garage heat. We program and sell replacement remotes the same day, and we stock parts for the brands you’ll find on most Hurst gates. If your remote works but the gate doesn’t, we trace the problem before we sell you a new remote. Often it’s not the remote. It’s the operator, or the post, or a safety sensor knocked out of alignment when the clay shifted.
Phone Entry
Phone entry systems connect your gate to your cell so you can open it from anywhere. For Hurst properties with long driveways, and especially for acreage on the east side of the city where rigs and trailers come and go, phone entry solves a real problem: you can’t hear the gate buzzer from 300 feet away. A phone-entry retrofit in Hurst usually lands between $600 and $1,100, and we configure the system, walk you through the app, and leave you with a printed one-page cheat sheet. No call center. Just us.
Card Reader
Card readers show up on a lot of Hurst small businesses and a handful of larger residential properties. The failure mode is usually moisture in the reader housing or a worn card reader head, and in Hurst’s freeze-thaw winters, condensation and cracked seals are common. We replace readers, re-seal housings, and match the card format to the existing operator. Typical card-reader service in Hurst starts around $250 and goes up based on the operator brand and how much wiring needs repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We’re certified to service nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Hurst specifically, we see a lot of Linear and FAAC on older residential gates, Viking and Mighty Mule on rural and acreage entrances east of Loop 820, and LiftMaster everywhere. We keep common parts in the truck so we’re not running back to a warehouse mid-job. If we need to order a board, we tell you that upfront, with a real time frame and a real price.
Common Gate Access Control Problems We See in Hurst Homes
- Posts heaved out of plumb by clay soil. Hurst sits on expansive Blackland Prairie clay. Spring rains swell it; summer drought cracks it. A post that moves two to three inches is enough to make a perfectly good keypad or remote look broken, because the gate won’t physically latch.
- Solar openers losing charge under post-oak shade. Long driveways off Brown Trail and Precinct Line Road often have mature post oaks and pecan trees. A solar panel sized for full sun won’t produce enough in winter, and the gate goes dead in January. We re-site panels or size them correctly for the shade pattern.
- Undersized operators on wide farm gates. A 16-foot farm gate or a heavy pipe gate with livestock pressure needs a slide or articulated-arm operator built for torque. Residential-duty openers strip gears and burn motors within a season. We size the operator for the gate, not the budget.
- Older wiring and sensors failing after ice storms. Hurst gets hit by DFW mid-cities ice events every few winters. Freeze-thaw cycling cracks sensor housings, splits wire insulation, and kills photo-eye alignment on automatic gates. We handle the whole loop: operator, sensors, keypad, and the wiring between them.
Pricing for Gate Access Control in Hurst, TX
For Hurst specifically, here’s what we see on real jobs. Keypad entry installation runs $350-$700. Phone-entry retrofit runs $600-$1,100. Card-reader service starts around $250. A new solar-ready gate operator for a standard residential swing gate in Hurst, installed, runs $900-$1,800. A heavy-duty operator sized for a 16-foot farm or acreage gate starts around $1,800 and goes up with gate weight and wind load. The price we quote is the price you pay. It’s agreed in writing before any work starts, and there’s no trip charge inside the county. We also offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 and get a free estimate that means something.
We Also Serve Cities Near Hurst
Gatewood Fence & Gate serves Hurst and the surrounding mid-cities communities, including North Richland Hills, Bedford, Colleyville, and Haltom City. If you’re in one of those cities with a gate access problem, the same crew, the same 90-Day Done Right Promise, and the same live-answer phone apply. We coordinate all scheduling from our Dallas-Fort Worth office and our team serves Hurst locally, every week.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Hurst
Your hinge post is rising and falling with the Blackland Prairie clay. In wet springs, the soil swells and the post lifts, which tightens the clearances. In summer, the clay dries, shrinks, and the post tilts back the other way, dragging the gate across the ground. The fix is resetting the post footing below the shrink-swell zone and re-hanging the gate with proper hinge geometry. It’s the most common access-control repair we do in Hurst. Call (817) 241-4067 for a free estimate on a post reset and rehang.
Yes. Solar gate openers work on most Hurst acreage entrances, but the panel has to be sized and sited for your actual shade. We look at the tree canopy, the panel’s angle, and the gate’s cycle count before recommending solar. If a mature post oak shades the panel all winter, you’ll need either a larger panel or a relocated one. We’ve done full solar retrofits on existing openers off Brown Trail and Precinct Line Road where running mains was impractical. Solar adds roughly $400-$900 to a new operator install, depending on panel size and battery bank. Call us for a straight answer on whether solar fits your driveway.
Skip the residential-duty opener. A 16-foot gate needs a commercial or agricultural-duty slide or articulated-arm operator for the weight, the wind loading, and whatever the livestock lean against. We spec the operator based on the actual gate weight and the post condition, because in Hurst the post condition is the wild card. If the post is heaved or underset, even the best operator will bind. We handle the post, the operator, and the access system as one job. Expect a heavy-duty opener for a gate this size to start around $1,800 installed, with the final number tied to the gate’s actual weight and the post work required.
On most Hurst homes with LiftMaster, FAAC, or Linear operators, we tie a weather-sealed keypad into the existing control board’s radio or direct-wire input. On older operators without a keypad terminal, we add a small receiver module rather than replacing the whole opener. The job typically takes a couple of hours and runs $350-$700, and we verify the post, the hinges, and the operator’s health while we’re there. If the gate doesn’t swing true, a new keypad won’t fix that. We’ll tell you before we touch anything.
The remote works because it broadcasts directly from your hand to a receiver on the operator. The phone entry fails because the cellular or Wi-Fi bridge module lost its connection or its subscription. In the mid-cities, we’re far enough from the broadcast towers that a weak cellular signal at the gate is a common culprit, especially on lower-lying lots near creeks and drainage ways. We test the bridge module, the signal strength, and the power supply before recommending a repair or replacement. In most cases we can restore phone access the same visit. Call (817) 241-4067 and we’ll walk you through what to check before we even roll a truck.
Hurst Clay, Gates, and Access Control: The Pattern We See Every Year
Here’s the paragraph we can’t put on any other city’s page, because it’s the defining pattern of gate work in Hurst. The city sits squarely on North Texas’s Blackland Prairie clay, a soil that swells with spring rain and shrinks through summer drought. Every gate in Hurst’s 1960s through 1980s subdivisions sits on posts set into that clay, and those posts heave seasonally. A “gate won’t close” call in Hurst almost always means the post footing has moved two to three inches, not the hinge pin. The hinge is the symptom; the post is the disease. Post resetting and re-hanging driven by soil movement is the defining repeat-repair pattern here in a way it simply isn’t in sandier-soil suburbs to the east. If you live off Brown Trail or along Precinct Line Road and your keypad works fine but the gate won’t catch the latch, this is your problem. We know exactly what we’re going to find before we get out of the truck.
A recent example from our own files: one of our techs rolled to a ranch-style home on a long driveway off Brown Trail. The keypad entry worked, but the gate wouldn’t latch. The hinge post had heaved nearly three inches over a summer. We reset the post footing in concrete, re-hung the LiftMaster operator, and added a solar panel to the existing opener because the mains pull was undersized for the new run. The gate swings true now, and the loop detector trips before the truck reaches the panel. That’s the job. The access system only works if the gate underneath it is right.
Call Gatewood Fence & Gate for Gate Access Control in Hurst
If your gate is dragging, your keypad is dead, or your phone entry won’t connect, call (817) 241-4067. A live person answers, 24/7. We’ll give you a straight answer, a free estimate, and a schedule that works for you. No trip charge inside the county, no price that changes at the door, and the 90-Day Done Right Promise on every job, in writing. The name is on the shop, and the shop is down the road. That’s the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Hurst with locally owned and owner-operated gate access control since 2001.