Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Bedford
Gate access control in Bedford, TX typically runs $450-$1,850 depending on whether we’re adding a keypad to an existing opener or building out a full video intercom with phone entry. Most Bedford jobs are done in a single visit, and we stock the common parts on the truck so you’re not waiting a week for a backordered board. Hal Gatewood has been fixing and automating gates since 2001, and his crew works Bedford alleys and driveways every week. If your keypad stopped reading codes, your remote quit, or you want a phone-entry system so you don’t have to hand out clickers, call (817) 241-4067 and you’ll get a live person, day or night.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Access Control Company
Bedford is a fully built-out Mid-Cities suburb. Almost every house here went up between the late 1960s and mid-1980s, which means the cedar gates hanging off those brick ranch and split-level homes are now 40 to 50 years old. The original hardware has been through 50 North Texas summers and 50 spring rain seasons. That’s the work we see most in Bedford, and it’s why local reviews mention us showing up on time and fixing the gate in the driveway instead of hauling it off. When someone in Bedford calls about a gate access system that quit, they usually don’t need a whole new gate. They need someone who can tell the difference between a dead keypad and a post that heaved out of square and pulled the latch away from the reader.
Hal’s name is on the shop. His address is published, his license number is public, and he has been at this since 2001. That’s the kind of accountability people in Bedford tell us they were missing when a national outfit quoted one price on the phone and showed up with another number. Every job carries the 90-Day Done Right Promise in writing. If it’s not done right, one call brings him back. There’s a live person answering the phone 24/7, not a phone tree. If you’d rather talk face to face, drive to the shop and look him in the eye.
Our Gate Access Control Services in Bedford
Keypad Entry
A keypad entry system in Bedford runs $450-$850 installed on an existing opener, depending on whether we’re running new wire or working with what’s there. The thing about Bedford specifically is the clay. Your original gate posts sit in Blackland Prairie soil that swells with spring rain and shrinks in August heat. The post moves. The keypad is mounted to that post. When the post leans half an inch, the latch no longer lines up with the strike, and the code stops working because the deadbolt physically cannot throw. We re-square the post, set a proper footing, and remount the keypad so it reads every time. We don’t just swap the keypad and call it fixed, because that fix lasts one rain cycle.
Video Intercom
A video intercom for a Bedford home typically runs $1,200-$1,850 installed, which includes the monitor, the outdoor camera unit, and the wiring run. On Bedford’s older brick ranch homes, we’re usually fishing wire through existing wall cavities and along fence lines that have had 40 years of landscaping layered on top. We handle the power supply, the relay to the existing gate opener, and we set up the app on your phone before we leave. If you’re on a rear alley lot off Harwood Road, we know the drill with those back gates. That’s not a generic install. That’s our regular Tuesday.
Remote Control
Remote controls for gate access in Bedford run $85-$225 per remote, depending on the brand and whether we’re programming an existing receiver or adding a new one. We program LiftMaster, FAAC, Elite, Mighty Mule, and every other major brand on the truck. If your remote worked last week and doesn’t today, the problem is usually not the remote. In Bedford’s older gate stock, it’s usually a sagging gate that changed position and the opener’s limits are now off, which makes the remote seem dead but the board is fine. We check the whole circuit before we sell you a clicker.
Phone Entry
Phone entry systems in Bedford run $750-$1,400 installed. This is the setup where a visitor presses the call button, your phone rings, you talk to them, and you press a button on your phone to open the gate. It’s popular on Bedford’s shared driveways where two or three homes share one gate and nobody wants to keep track of who has a clicker. The wiring has to be solid, because a phone entry system is only as good as the connections running through a 40-year-old fence line. We run new wire where it’s needed and we test it in front of you before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We’re certified to service nine major gate brands, including LiftMaster, FAAC, Elite, and Mighty Mule. For Bedford customers, that matters because these older systems have proprietary boards and receivers, and if you call someone who only knows one or two brands, you end up paying for a conversion you didn’t need. We stock parts for the common operators on the truck, so a Bedford repair is often done in the same visit. If we need a board, we can usually have it in a day or two, not two weeks. When you call (817) 241-4067, you’ll talk to a person who can tell you over the phone whether your brand is something we service. We service all of them.
Common Gate Access Control Problems We See in Bedford Homes
- Post heave from Blackland Prairie clay. Bedford’s original gate posts sit in soil that expands and contracts with every wet-dry cycle. Over 40 or 50 years, that movement racks the gate frame out of square, and the keypad or intercom mounted to that post drifts until the latch and reader no longer align. Codes fail, not because the board died, but because the gate physically shifted. We correct the post and re-square before anything else.
- Rear alley gates with residential-grade hinges. A lot of Bedford’s interior neighborhoods were built with rear utility alleys. The back-alley gate takes repeated hits from garbage trucks and utility vehicles. Standard residential hinges snap within a season in that application. When the hinge fails, it yanks the access control wiring loose and drops the reader. We install heavy-duty hinges rated well above residential standard on every Bedford alley gate we touch.
- Rusted-out brackets on slide gates. On shared driveways where a swing gate won’t fit, Bedford homeowners use slide gates. The 40-50-year-old steel brackets under these gates have rusted thin over time. They flex under the rack and pinion load, and that flex causes loop detector dropout and sensor misreads. The gate thinks there’s an obstruction and reverses, or the loop doesn’t pick up the car at all. Rust-thinned brackets are a Bedford-specific pattern we see constantly.
- Dead receivers on aging openers. The original opener on a 1980s Bedford gate was not designed for today’s rolling-code remotes. The receiver board degrades, range drops to ten feet, and the remote only works if you’re practically touching the gate. We replace the receiver, program new remotes if needed, and bring the system into spec without replacing a gate that still has years of life in it.
Pricing for Gate Access Control in Bedford, TX
Here are real numbers for Bedford. A keypad entry install runs $450-$850. A remote control is $85-$225 per unit. A phone entry system runs $750-$1,400. A full video intercom with app control runs $1,200-$1,850. Slide gate operators on shared driveways run $1,800-$3,200 depending on gate length and weight. The price is quoted and agreed before any work starts, in writing. It does not change at the door. If we find something else wrong while we’re in there, we stop and tell you what it costs before we do anything. That’s the whole point of hiring a local guy whose name is on the invoice.
No trip charge inside the county, including all of Bedford. We offer $40 off any repair over $200, a free second opinion on any written estimate from another company, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a free estimate.
We Also Serve Cities Near Bedford
Our crew works Bedford every week, and we also serve Colleyville, Euless, Hurst, and North Richland Hills. If you’re in one of those cities and want the same no-hassle pricing and 90-Day Done Right Promise, the Gate Access Control team is the same crew you’ll see at the hardware store. For Bedford-specific scheduling, call (817) 241-4067 and ask for Gate Access Control in Bedford.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Bedford
The clay under Bedford expands when it rains and contracts when it dries, and it does this every single year. Your original gate post, sitting in that clay for 40 or 50 years, has been levered back and forth thousands of times. The post leans, the gate racks out of square, and the keypad or intercom mounted to that post drifts out of alignment with the latch. The code stops working. We correct the post with a proper footing, re-square the gate, and remount the reader. That’s the actual fix, not a new keypad. Call (817) 241-4067 and we’ll come look at your post before we sell you anything.
Yes. Shared driveways and tight fifth-lines in Bedford often don’t have the swing radius for a standard gate, so we install slide gates. The operator runs $1,800-$3,200 depending on gate length. We run the power, set the rack and pinion, install the loop detector for vehicle activation, and wire the keypad or intercom. The existing post has to be solid in the clay, or the slide track will bind. We check that first. Call (817) 241-4067 for a site visit and a written quote.
The hinge is failing because it’s rated for residential duty, and your alley gate takes garbage-truck impact every week. You can replace the opener, but if the hinge is flexing, the gate shifts and the access control wiring pulls loose, and the cycle repeats. The fix is a heavy-duty hinge rated above residential standard, with the post set correctly in the clay. We did a Viking keypad entry on a back-alley cedar gate off Harwood Road where the original post had heaved a full inch out of square. New footing, new heavy-duty hinges, remounted reader. The gate has been straight since. That’s the difference.
A loop detector is a buried wire loop in the driveway that senses the metal mass of your car and tells the opener to activate. When it’s not working, your gate will not open automatically as you approach. In Bedford, we see loop detector dropout on slide gates when rust-thinned brackets flex under the rack and pinion load, which throws off the sensor. Sometimes the loop wire itself has been cut by the same clay movement that shifts everything else. We test the loop, find the break or the movement problem, and replace or re-secure as needed. Call (817) 241-4067 and we’ll diagnose it on site.
Yes. If your rear-alley gate has no power run, a solar opener is a clean solution. The panel mounts on the gate post or a nearby fence line, charges a battery, and runs the opener. In Bedford’s dense older neighborhoods, running conduit under 50-year-old concrete walkways is a mess, so solar is often the better call. The panel needs direct sun for most of the day, so we check tree cover first. Solar openers for Bedford alley gates run $1,400-$2,800 installed depending on gate weight and battery size. Call (817) 241-4067 and we’ll tell you if your gate has enough sun.
Contact Gatewood Fence & Gate in Bedford
If you live in Bedford and your gate access control is acting up, call (817) 241-4067. You’ll get a live person who knows Bedford’s alleys, clay soil, and 1970s gate hardware better than anyone. Estimates are free, the price is written before we start, and the 90-Day Done Right Promise is on the invoice in plain English. Hal Gatewood’s name is on the shop. You can call, or you can drive over and look him in the eye. Either way, you’ll get a straight answer.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford since 2001.