Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Irving
Gate access control in Irving usually comes down to one of three fixes: repairing the keypad, phone entry, or card reader system already on your gate; retrofitting smart access to an existing operator; or running fresh conduit and wiring where none was ever installed. We handle all three, and we’ll tell you which one you actually need before any work starts. If you’re in Valley Ranch, Las Colinas, or anywhere else in Irving, call (817) 241-4067 and you’ll get Hal or one of his crew on the line, not a voicemail.
Why Gatewood Fence & Gate Is Irving’s Preferred Gate Access Control Company
We’ve been working on Irving’s gates long enough to know that the job is rarely what the original call describes. A keypad that stops working in August and comes back in November is not a keypad problem at all; it’s the black clay under the conduit shifting with the drought. Gatewood Fence & Gate is owner-operated by Hal Gatewood, and the person who answers the phone is the same person who stands behind the work. When a Valley Ranch HOA board calls us about an entry gate that won’t respond to the call box, we don’t send a stranger with a corporate script. We send someone who has pulled wire in that subdivision and knows what the original 1980s conduit looks like underground.
Our Irving customers get the 90-Day Done Right Promise in writing, no exceptions. They get upfront pricing before work begins, no trip charge inside the county, and a live voice around the clock. That’s how we’ve kept our Gate Access Control work in Irving turning on referrals for years. Homeowners in Las Colinas and Valley Ranch don’t want a national chain’s call center; they want a shop they can drive past and a name they’ll see again at the hardware store. That’s what we offer.
Our Gate Access Control Services in Irving
Keypad Entry
Most Irving homes with automated gates use a hardwired or wireless keypad mounted at the driveway. The keypads on Valley Ranch gates, especially those installed in the 1980s and 1990s, often outlast the wire feeding them. If your keypad works intermittently, the keypad itself is probably fine. We test the unit, then trace the low-voltage feed. We’ll replace the keypad only if it’s actually failed; we’ll replace the wire if the conduit has cracked.
Phone Entry
Phone entry systems in Irving’s HOA communities and corporate campuses are the most misdiagnosed access control component we see. The system relies on a phone line or cellular connection tied to an intercom board inside the operator housing. When the shared conduit shifts with the clay and shorts the feed, the phone entry goes dead but the gate still opens from a remote. That’s a wiring fault, not a board failure. We can run a new dedicated conduit, rewire the system, and get your phone entry working without replacing the operator.
Smart Access
You can add smart access control to nearly any existing operator in Irving, including older FAAC and Linear models still in service across Valley Ranch and Las Colinas. We install app-based controllers, Bluetooth readers, and video intercoms that work with your current gate hardware. If your operator is still sound, you don’t need to replace it to get modern access. We’ll tell you straight if the existing unit has enough life left in it to justify the add-on.
Card Reader
Card readers are standard on Irving’s commercial gates along SH-114 and Loop 12, where warehouses, data centers, and corporate campuses run vehicle-access slide gates. We install and repair proximity card readers, Wiegand readers, and long-range RFID systems. We also handle the wiring between the reader and the operator, which is where most failures happen after a few Texas summers.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We’re certified to service the operators already installed across Irving, including Elite, Mighty Mule, LiftMaster, FAAC, and hundreds of Linear units still running in Valley Ranch. We stock common parts locally so most repairs happen same-trip, not two weeks later. If your operator is one of the builder-grade LiftMaster or FAAC units that underperforms after two or three years of daily HOA traffic, we’ll tell you that too, and we’ll talk through whether a retrofit makes more sense than another patch job. The price gets quoted and agreed before we touch anything.
Common Gate Access Control Problems We See in Irving Homes
- Shared conduit cracking under shifted concrete: Valley Ranch entry gates from the 1980s and 1990s frequently share a single underground conduit loop powering both the operator and the intercom. When black-clay soil movement cracks that conduit, you get intermittent keypad and phone entry failures that look like operator faults but are not.
- Builder-grade operators failing early: Las Colinas and Valley Ranch were built fast, and the automated gates installed during construction often used operators sized for light residential use, not the daily cycles an HOA entry sees. We replace underpowered units with properly rated operators when repair no longer makes sense.
- Manual gates with no power or conduit run: Many Irving homes built in the 1980s and 1990s have ornamental iron gates that were installed manually at construction. Adding access control to those gates means trenching through expansive black clay that shrinks every dry season, and running the conduit deep enough to survive the movement.
- Post movement throwing alignment off: The Blackland Prairie’s clay soil shrinks in summer droughts and re-expands with spring rain. Gate posts in Irving heave and tilt, which binds the gate in the track or derails the operator. Access control works fine, but the gate won’t move. We fix the post alignment, not just the electronics.
Pricing for Gate Access Control in Irving, TX
Here’s what we see in Irving, based on the work we’ve done across Valley Ranch and Las Colinas. A keypad replacement on a residential gate runs $180 to $320. A phone entry system repair, depending on whether it’s the board or the wiring, runs $220 to $475. Add smart access to an existing operator and expect $350 to $750 for parts and install. A card reader on a commercial slide gate runs $300 to $800 depending on reader type and distance from the operator. Retrofitting power and conduit to a previously manual gate starts around $850 and goes up with trench length and clay conditions. Every estimate is free, and the quoted price is what you pay. Call (817) 241-4067 and we’ll come look at your gate in Irving and write it up.
We Also Serve Cities Near Irving
Our Irving customers often ask if we work in the neighboring towns. We do, and we know the drive. You’ll find us running gate access control calls in Duncanville, Grand Prairie, Euless, and Bedford on any given week, and the same pricing and same 90-Day Done Right Promise apply. No extra trip charge inside the county, no games.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Irving
August is when Irving’s black clay is at its driest, and the soil shrinks enough to crack the underground conduit feeding your gate’s keypad or phone entry system. The failure is in the wire, not the operator. We fix the conduit and rewiring, not the keypad, because the keypad was never the problem. Call (817) 241-4067 for a free look.
If your gate opens from the remote but the keypad or phone entry is dead, that’s a wiring fault in the conduit, not an operator failure. If the gate won’t move from anything, including the remote, the operator is more likely the culprit. We can test both in one visit and tell you which it is. Call for a free second opinion on any written estimate you’ve been given.
Yes, in most cases. We add app-based controllers, Bluetooth readers, and video intercoms to existing FAAC and Linear operators still running in Valley Ranch and Las Colinas. If the operator is still sound, you keep it. If it’s on its way out, we’ll say so before you spend money on the retrofit. Your quote is agreed before work starts.
Spring storms saturate the expanding clay, which flexes the shifted conduit and breaks or shorts the low-voltage wire feeding the pedestrian keypad. The remote still works because it does not depend on that wire. We run a new dedicated conduit and rewire the keypad feed, and it stops happening. That’s an Irving-specific failure we see every spring.
Entrapment protection is the safety system that stops and reverses the gate if it hits someone or something, typically via photo eyes, edge sensors, or current sensing. Yes, it is required on automated gates in Irving, including HOA community entry gates. If your gate lacks working entrapment protection, your board is carrying real liability, and we can install compliance-grade safety edges and sensors. Call (817) 241-4067 and we’ll check your gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Irving with gate access control, on-site welding, and honest repair work since 2001.