Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haltom City
Gate installation in Haltom City starts with a simple reality: the ground moves. The Blackland Prairie clay under most of this city swells in wet winters and shrinks in August heat, which means a gate post set in a shallow footing will tilt before you’ve paid the credit card bill. Hal Gatewood has been setting posts and hanging gates in this soil since 2001, and we plan every Haltom City installation around the clay, not in spite of it. We answer the phone at (817) 241-4067 with a live person, 24 hours a day, and we’ll give you a straight answer on price before any work starts.
Why Gatewood Fence & Gate Is Haltom City’s Preferred Gate Installation Company
Hal Gatewood’s name is on the shop. That’s the accountability that matters when a gate sags a year after the install and the company that put it in has moved their phone number. We’ve been locally owned and owner-operated since 2001, with a published address and license number anyone can look up. If something isn’t right, the 90-Day Done Right Promise means one call brings Hal back, in writing, not buried in fine print.
Calls from Haltom City are answered by a live person, not a voicemail. Not a call center three states away. Not a chatbot. You get the person who will show up at your door. Our crew works in Haltom City regularly, from the ranch houses along Denton Highway to the industrial pockets off Baker Boulevard, so we know the soil, the lot layouts, and the code inspectors by name. When you call about a gate on a 1960s tract home near Haltom Road, we already know what we’re likely to find before we pull into the driveway.
Our Gate Installation Services in Haltom City
Every job starts with the same question: how does this gate survive the clay? Haltom City’s shrink-swell soil heaves posts several inches between February and July, and a gate that ignores that fact will bind, drag, or miss the latch within a season. Our Gate Installation team builds for the ground first and the gate second. Here’s what that looks like for the four gate types we install most in Haltom City:
Driveway Gate
Most Haltom City driveway gates are swing-style on 1950s to 1970s ranch homes, and most of them were set by a handyman with a two-foot-deep hole and a bag of Quikrete. Those posts are already leaning. We auger post holes 36 inches deep, set in steel-reinforced concrete, and size the post for the gate weight plus the clay pressure that will push against it year-round. A driveway gate in Haltom City should outlast the house it hangs on, not the other way around.
Pedestrian Gate
Pedestrian gates on Haltom City lots tend to get welded, reused, and re-welded over decades, especially in the older neighborhoods east of Denton Highway where original wrought iron is common. We’ll tell you honestly whether a rusted pedestrian gate is worth saving or whether the metal is too thin to weld again. When it’s too far gone, we install new, and we size the post for the gate’s swing arc plus the gate’s actual weight, not the manufacturer’s optimistic spec sheet.
Sliding Gate
This is the one Haltom City needs most and gets least. Tight lots, shared driveways, and commercial parcels alongside residential blocks often leave no room for a swing gate’s arc, so the gate has to slide. But a slide gate is only as good as the post line it rides on. In reactive clay, the post that carries the rack and pinion shifts with the seasons, and the operator strips gears fighting the bind. We set slide gate posts deeper than swing posts, and we pour a continuous concrete track bed where the soil is especially active. That’s the difference between a slide gate that works for fifteen years and one that eats a gear set every spring.
Swing Gate
Where a swing gate fits, it’s still the most cost-effective option, and a properly set post makes it reliable. Haltom City swing gate failures are almost always post failures, not hinge failures. A gate sags in the hinge post, not in the middle, and that is where we start. We check the plumb line before we touch a hinge. If the post is out by even an inch, we reset it before rehanging the leaf, because hanging a new gate on a leaning post means you’ll be calling us again in the spring.
Double Gate
Double driveway gates are standard on Haltom City’s wider lots, especially on the east side where lots run deeper. The failure point here is almost always the center latch alignment. When both posts shift with the clay, the two leaves don’t meet in the middle anymore, and the latch won’t catch. We install double gates with a drop bar or a latch system that can be adjusted seasonally, and we set both posts on the same reinforced footing where the soil is active.
Post Footing
The single most repeated gate repair in Haltom City is a post reset. Clay swells, the post lifts and tilts, the gate misses the latch. We dig out the old footing, auger to 36 inches, set the post in new concrete with rebar, and rehang whatever gate and operator the homeowner already has. In most Haltom City yards, this beats buying a whole new gate. Fix the post without the panel and you’ve fixed the problem. Replace the panel on a bad post and you’ll replace it again.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re certified to service nine major gate brands, and in Haltom City the most common operators we see on older ranch homes are LiftMaster, FAAC, and Linear, with BFT and Viking showing up on the commercial and industrial gates along Baker Boulevard and the rail corridor. We keep common boards, sensors, and gear kits stocked so we’re not waiting on a distributor while your gate sits open to the street. If your operator is still good, we’ll build the new gate around it and save you the cost of an opener you didn’t need.
Common Gate Installation Problems We See in Haltom City Homes
Every city has its own failure pattern. Ours starts in the soil.
- Post heave from Blackland Prairie clay: The clay under Haltom City swells and shrinks with moisture. Posts set in shallow footings lift, tilt, and drop within one season. This is the number-one reason a brand-new gate won’t latch by summer.
- Swing gates on shared driveways: Many Haltom City driveways are shared between two or three homes, and a swing gate arc blocks the neighbor’s access. A slide gate is usually the answer, but only if the post line is set right.
- Operator bind from shifted posts: When a post tilts out of plumb, the gate leaf puts constant bind on the operator arm, and a LiftMaster on a 1960s ranch home will overheat and strip its gear set. We see this constantly, and it’s almost always a post problem, not a motor problem.
- Haltom City’s heat and metal expansion: Summers over 100°F make steel gate frames expand, widening the gap between the gate leaf and the latch post. If the gate was hung tight in winter, come August it’ll slap in the wind. We account for that in the hang height and the latch throw.
Pricing for Gate Installation in Haltom City, TX
A typical single swing driveway gate in Haltom City runs $1,400 to $2,800 installed, including a properly set post and the hardware. A slide gate runs $2,800 to $5,500, depending on the run length and whether we need a concrete track bed. Pedestrian gates run $600 to $1,400. Double driveway gates run $2,500 to $4,800. If we’re just resetting a post and re-hanging your existing gate, figure $400 to $900 per post, depending on depth and access.
Everything we quote is the price you pay. No trip charge inside the county, and we put the number in writing before any work begins. Senior and veterans get 10% off, permanently. We also offer $40 off any repair over $200. Call (817) 241-4067 for a free estimate.
We Also Serve Cities Near Haltom City
Our crew works across the Haltom City area, including the neighborhoods along Sandy Lane and Haltom Road. If you’re just over the line in Fort Worth, North Richland Hills, Hurst, or Bedford, we’ll come to you. Same crew, same 90-Day Done Right Promise, same live-person phone answer. See our Haltom City page for more on our local service area.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Haltom City
Because the post was set in reactive Blackland Prairie clay with a shallow footing. The clay swells when wet and shrinks when dry, and a post set less than 24 inches deep will get pushed out of plumb within a season or two. We set posts 36 inches deep in reinforced concrete, which holds the post independent of the clay movement. If your gate is leaning again after someone else’s “repair,” the footing was never deep enough. Call (817) 241-4067 and we’ll take a look.
Usually not, and that’s because of the driveway geometry, not the soil. A swing gate needs a clear arc, and a shared driveway means the gate would swing into the neighbor’s access every time it opens. A slide gate is the better answer, and we set the post line deep enough to hold the rack and pinion straight through the seasons. Free estimate on any gate that has to coexist with a neighbor.
We check the operator’s condition before we touch the gate. Most LiftMaster, FAAC, and Linear operators on Haltom City homes still have years left, and replacing them just because the gate changed is wasteful. We re-hang the new gate to the proper alignment so the operator isn’t fighting the post, and we wire the existing unit back to a properly adjusted rack. If the operator is dead, we’ll tell you that upfront and give you options.
Weight and traffic. The industrial parcels along Baker Boulevard and the rail corridor carry heavier slide gates, often chain-link with steel frames, and they cycle many times a day as trucks come and go. Those gates need deeper post footings and a more robust rack and pinion system than a residential swing gate on a quiet street off Haltom Road. We size for the cycle count, not just the gate width.
Yes. A loop detector senses a vehicle on the ground loop and holds the gate open so it doesn’t close on a truck. On any commercial slide gate in Haltom City that sees vehicle traffic more than a few times an hour, a loop detector is not optional, it’s how you avoid property damage and an operator that gets slammed into reverse a hundred times a day. We install and wire loop detectors with every commercial slide gate we put in, and we’ll explain exactly how it works before we start.
Call Gatewood Fence & Gate for Gate Installation in Haltom City, TX
If you’re in Haltom City and need a gate installed, a post reset, a sagging double gate repaired, or an operator that finally stops fighting the clay, call Hal at (817) 241-4067. You’ll get a real person, a straight answer, and a written price before the first shovelful of dirt comes out. Free estimates, no trip charge inside the county, and every job backed by the 90-Day Done Right Promise in writing.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haltom City since 2001.