Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haltom City
If your Haltom City gate is sagging, scraping concrete, or won’t latch, the problem is almost never the gate leaf itself. It’s the post under it. Haltom City sits on Blackland Prairie clay that swells in wet winters and bakes rock-hard in summer, and that movement shifts gate posts several inches between seasons. We’re Gatewood Fence & Gate, and we’ve been welding and repairing gates in Haltom City long enough to know exactly what that clay does to a post footing. Call (817) 241-4067 and Hal or one of his crew will come look, quote a firm price before any work starts, and fix it in your driveway, not in some shop across town.
Why Gatewood Fence & Gate Is Haltom City’s Preferred Gate Parts & Welding Company
Hal Gatewood has been at this since 2001. His name is on the shop, his address is published, and his license number is there for anyone to check. That matters in Haltom City, where a lot of the gates we see were put in by homeowners or a handyman who set posts in a shallow bag of concrete and called it done. We get the calls when those gates finally give up.
Haltom City customers call us because we answer the phone with a live person, 24 hours a day. Not a voicemail, not an answering service. When your gate won’t close and your dog is eyeing the street, that’s the call you want to make. We also show up when we say we will, which is more than a lot of folks here can say about the last company they tried.
Every job carries our 90-Day Done Right Promise in writing. If something’s not right, one call brings Hal back. No runaround, no fine print. That’s the oldest kind of accountability there is: the name on the shop is the guy who shows up.
Our Gate Parts & Welding Services in Haltom City
We repair gates the way they were meant to be repaired: on site, welded, aligned, and re-hung. Here’s what most Haltom City callers need from our Gate Parts & Welding team.
Hinge Replacement
Hinge replacement in Haltom City usually starts with a post that’s moved. We replace the hinge but we also check what the post is doing underneath. A new hinge on a leaning post will fail inside a year, which is why we reset the post or at minimum reinforce the hinge bracket before we re-hang the gate. Most hinge jobs run $180-$340 depending on post condition and gate weight.
Post Replacement
This is the big one for Haltom City. Blackland clay heaves and drops with the wet-dry cycle, and a post set in a shallow footing will lean until the gate won’t latch. We dig the old footing out, set a new post deeper, and often weld a reinforced base plate to spread the load. A post replacement with concrete work typically runs $350-$650 in Haltom City. It’s the repair that finally stops the sagging instead of just hiding it for a season.
Rail Repair
Rails on older tubular steel gates in Haltom City crack at the weld points from years of heat expansion and the constant stress of a shifting post. We cut out the cracked section, weld in new steel, and grind it smooth. We also check the other rail for fatigue while we’re there. Rail repair runs $150-$400 depending on how much steel needs replacing and whether the gate has to come off its hinges to do the weld cleanly.
Custom Welding
Sometimes a stock part doesn’t fit what’s out there on a Haltom City property. Older ranch-style gates along the Denton Highway corridor were often built to odd dimensions, and the original hardware isn’t made anymore. That’s where on-site welding earns its keep. We fabricate hinge plates, weld extension brackets, reinforce weak corners, and build up metal that’s worn thin. Custom welding jobs run $125-$350 for most residential fixes, quoted before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re certified to service LiftMaster, Elite, Mighty Mule, FAAC, and most other major gate operators out there. If your Haltom City gate has an automatic opener, we stock the common parts locally and can usually get specialty boards and arms in within a day or two. We don’t play the game of telling you the whole operator needs replacing when a limit switch or a capacitor is the actual problem. Hal fixes what’s broken, and he doesn’t swap parts that don’t need swapping.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Posts leaning from clay movement. The Blackland Prairie soil here shrinks and swells far more than the sandy soil in cities like Hurst or North Richland Hills. A post set in a shallow footing shifts every season, and the gate drops with it. We reset the post deeper and it stays put.
- Summer heat warping the gate frame. Haltom City summers routinely pass 100°F, and that heat expands the metal. The gap between the gate edge and the latch post widens until the keypad or the manual latch won’t catch. We straighten and weld-reinforce the frame so it holds its shape in August.
- February 2021-style freeze damage. That hard freeze seized automatic operators all over Haltom City and cracked weld points on gates that had never been winterized. If your gate groans or jerks in cold weather, the welds are telling you something.
- Handyman-built gates failing early. Along and east of Denton Highway, many driveway gates were installed by uncertified handymen who used undersized posts and shallow concrete. We see these fail in the same predictable way: post lean, gate drop, latch miss. The fix is a proper post set and a reinforced hinge weld.
Pricing for Gate Parts & Welding in Haltom City, TX
Here’s what you should expect to pay in Haltom City. Hinge replacement runs $180-$340. Post replacement with new concrete runs $350-$650. Rail repair is $150-$400. Custom welding is $125-$350 for most residential jobs. Heavier slide gates on commercial or shop properties run higher because the steel is thicker and the welding takes longer. We quote the full price before any work starts and it doesn’t change at the door. We also have standing offers that don’t require haggling: $40 off any repair over $200, no trip charge inside the county, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 with what you’ve got and we’ll tell you straight what it’ll cost.
We Also Serve Cities Near Haltom City
If you’re in Fort Worth, North Richland Hills, Hurst, or Bedford, we cover those too. But this page is for Haltom City, and everything Gate Parts & Welding in Haltom City needs to know is right here. Call us from anywhere in the county and a live person picks up.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haltom City
Because the gate leaf isn’t the problem. The post underneath it is shifting in the Blackland Prairie clay, and straightening the gate without resetting the post is like leveling a picture on a wall that’s leaning. Haltom City’s soil moves several inches between wet winters and dry summers, and a shallow post footing will lean again within a season. The fix is pulling the post, pouring a deeper footing, and re-hanging the gate square. Call (817) 241-4067 and we’ll look at the post before we touch the gate.
Yes. In almost every case we reset the post rather than replacing the whole gate. We dig out the old footing, set the post deeper, pour new concrete, and often weld a reinforcing plate at the base. We’ve done this on hundreds of Haltom City driveways, including a 1950s ranch lot near Denton Highway where the hinge post had moved over two inches and the gate was scraping concrete. A new deeper footing and a reinforced hinge bracket had it latching again the same day.
If your gate is far from the house and the breaker panel, solar often makes the most sense. Running line voltage hundreds of feet down a long driveway costs real money in trenching and wire. A solar kit with a battery bank can power a heavy swing or slide gate without any of that. If you’re on the edges of Haltom City where lots open up toward the industrial parcels or larger acreage, we’ll walk you through the power draw of your operator and whether solar will hold up through a cloudy January. Estimates are free.
Yes. Any automated gate in Haltom City must meet UL 325 standards for entrapment protection, which means photo eyes, safety edges, or both, depending on the gate type and operator. We don’t install an operator without them, and we won’t leave an existing operator running if the safety devices are bypassed. That’s not a code quibble; a gate that closes on a person or a vehicle is a serious injury waiting to happen. We check the sensors on every service call.
Look at where the damage is. If the hinge itself is worn, bent, or seized, replacement is usually enough. But if the gate has dropped because the frame is twisted, the post is leaning, or a rail weld has cracked, new hinges alone won’t hold. We’ll tell you the truth. We’ve had plenty of calls where the hinge was fine and the real culprit was a post that had moved two inches in the clay. Call (817) 241-4067 for a free second opinion if another company already told you it needs a full replacement. We fix what’s actually broken.
Call Gatewood Fence & Gate at (817) 241-4067 for gate parts and welding in Haltom City. Free estimates, firm pricing, and a 90-Day Done Right Promise on every job.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Haltom City since 2001.