Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bedford
Gate parts and welding in Bedford usually means one of two things: a sagging cedar gate on a 40-year-old post, or a rear alley gate that’s taken one too many hits from a garbage truck. Most Bedford homes were built between the late 1960s and mid-1980s, and the original hardware on those gates is long past its useful life. We replace hinges, posts, rollers, and latches, and we weld on site so your gate never leaves your driveway. Hal Gatewood has been fixing gates since 2001, and when you call (817) 241-4067, a live person answers. Day or night.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Parts & Welding Company
Bedford is a tight, built-out Mid-Cities suburb. There’s no new construction to speak of, which means every gate we touch here is old enough to have been repaired at least once before, often badly. We see hinge screws stripped into rotten cedar, posts that were never set deep enough for Blackland Prairie clay, and “fixes” that lasted one season. Hal’s position on this is simple: fix the post and the panel together, or you’ll fix it twice. Our Gate Parts & Welding team works on site with a welder in the truck, and the 90-Day Done Right Promise is stamped on every invoice. Not in fine print. On the invoice.
Bedford homeowners call us because the person who shows up is the person whose name is on the shop, or one of his crew who has been doing this for years. We publish our address and license number. You can drive to the shop and look Hal in the eye if you want to. That’s the oldest accountability there is, and it still works in Bedford better than any review site.
Our Gate Parts & Welding Services in Bedford
Hinge Replacement
Most hinge replacement calls in Bedford start with a gate dragging across the top of the driveway or a latch that no longer catches. On Bedford’s 1960s-era cedar gates, the original galvanized hinges have usually seized or the screws have stripped out of the wood. We cut out the old hardware, weld or bolt in new hinges rated for the weight of the gate plus a safety margin, and set the gate so it swings true. For rear alley gates off Harwood Road, Forest Ridge, and other older Bedford neighborhoods, we routinely upgrade to heavy-duty commercial hinges. Standard residential hardware fails within a season when a garbage truck or utility vehicle clips the gate, and replacing the same hinge twice is money you shouldn’t have to spend.
Post Replacement
A gate sags in the hinge post, not in the middle. Bedford’s Blackland Prairie clay expands when it’s wet and contracts when it’s dry, which means posts heave and lean every single year. A new hinge on a leaning post is a hinge that will fail again. We dig out the old post, set a new one deeper with a proper concrete footing, and only then rehang the gate. In Bedford’s tighter side yards and shared driveways, we’re used to working in a space barely wide enough for a wheelbarrow. We bring the post hole digger, the concrete, and the welder, and the gate goes back up the same day.
Rail Repair
Cedar gates in Bedford take rail damage in two places: the bottom rail rots from ground contact, and the top rail splits where the hinge lag bolts pull through under repeated strain. When the rail fails, the pickets lose their anchor and the whole gate starts to rack. We replace the rail, reinforce the frame where it counts, and weld steel corner brackets when the gate needs more structure than cedar alone can give. On sliding gates, rail repair usually means the steel track has bent or the rollers have ground flats into themselves. We fix both.
Custom Welding
Some Bedford gates are worth rebuilding rather than replacing. A cedar privacy gate with good pickets but a failed frame is a perfect candidate for a welded steel subframe. We build a steel frame behind the existing wood, weld the corners, and hang the whole assembly on hinges that will outlast the rest of the gate. Custom welding also covers gate rollers, steel post caps, latch strike plates, and reinforcement for sagging driveway gates. If the gate closes on its own, we can show you exactly where it’s failing, and usually weld it stronger than it was new.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We’re certified to service nine major gate brands, and in Bedford we most often see FAAC and BFT operators on driveway gates, Linear on apartment and community entrances along Brown Trail, and Viking and Ghost Controls on residential slide gates. We stock common replacement parts locally and can have most opener parts in hand within a day or two. If your operator is fighting a gate that’s out of square, we fix the gate first and the opener second. Replacing an opener without fixing the gate that killed it is a waste of your money.
Common Gate Parts & Welding Problems We See in Bedford Homes
- Seasonal post lean and latch misalignment. Blackland Prairie clay expands after spring rain and contracts in summer drought, heaving posts and throwing swing gates out of square until the latch no longer catches. We set posts deeper than original and use concrete footings sized for Bedford soil.
- Rear alley gates battered by garbage trucks. Bedford’s 1960s-1980s neighborhoods were built with rear utility alleys, and those gates absorb repeated hits from trash and utility vehicles. Standard residential hinges bend or break at the weld; we install heavy-duty commercial hinges and reinforced post mounts here as a matter of course.
- Sliding gates binding on undersized rollers. Tight side yards and shared driveways leave no room for a swing gate, so many Bedford homes have slide gates on original steel rollers that are now flat-spotted or seized. The gate climbs off the track and the operator burns out trying to move it. We replace the rollers and repair the rail, then re-tune the operator.
- Corroded original hardware on 40-50 year old gates. The galvanized hinges, latches, and bolts installed when these homes were built have been rusting since the Nixon administration. By the time a latch stops catching or a hinge snaps, there’s usually nothing left to lubricate. We replace with sealed-bearing hinges and weather-rated hardware.
Pricing for Gate Parts & Welding in Bedford, TX
Here’s what we quote in Bedford, and the price we state before any work is the price you pay. A standard hinge replacement on a cedar walk gate runs $145-$260 depending on whether we’re working on one hinge or a full set. Post replacement with a new concrete footing typically lands between $390-$680 per post, including digging out the old one. Rail repair and steel reinforcement brackets run $180-$340, and custom welding on a frame or roller assembly is usually $300-$700 depending on the extent of the steel work. Every quote is written, agreed to before we start, and the 90-Day Done Right Promise applies to every job. Call (817) 241-4067 for an exact quote. Estimates are free, and there’s no trip charge inside the county.
We Also Serve Cities Near Bedford
Our crews cover Bedford daily, and we also serve the surrounding Mid-Cities and Northeast Tarrant County communities including Colleyville, Euless, Hurst, and North Richland Hills. Whether you’re off Brown Trail or up in Colleyville, the same crew and the same 90-Day Done Right Promise apply. Learn more about our Gate Parts & Welding in Bedford service area, or call (817) 241-4067 and we’ll get you on the schedule.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bedford
The hinge post is leaning, not the gate panel. Bedford clay soil heaves posts seasonally, so a new hinge on a moving post will fail within months. We set the post deeper with a concrete footing, then rehang the gate. Call (817) 241-4067 and we’ll check the post first, before selling you a hinge you don’t need.
Yes, and we do it regularly in Bedford. If the pickets are still sound but the frame has racked or the corner joints have failed, we weld a steel subframe behind the existing wood, rehang it on heavy-duty hinges, and it’ll swing true for years. It costs less than a full gate replacement and keeps the look of your original fence. Call (817) 241-4067 for a free estimate.
A heavy-duty commercial hinge with sealed bearings and a reinforced post mount. Standard residential hinges bend or snap at the weld when a truck clips the gate, which happens constantly on Bedford’s rear alleys. We stock heavy-duty hinges locally and install them as standard on alley gates. Call (817) 241-4067 and we’ll spec the right hardware for your alley.
Yes. While we’re replacing rollers, repairing the rail, or welding the frame, we can add or replace safety photocells and edge sensors on the gate operator. Shared driveways in Bedford’s older neighborhoods often have gates that predate modern safety requirements, and a working photocell is the difference between a gate that stops and a gate that doesn’t. Call (817) 241-4067 for a quote. We’ll have it itemized before any work starts.
Bedford sits on Blackland Prairie clay, which expands dramatically when wet and contracts when dry. Southlake has different underlying soil with less movement. Bedford’s older homes also typically have shallow-set posts from the original build. We set replacements deeper with concrete footings sized for the soil, which stops the seasonal lean. Call (817) 241-4067 and we’ll dig it out right.
We rebuilt a sliding alley gate off Harwood Road where the original cedar panel had sagged badly and the rack and pinion on a Ghost Controls operator kept binding. We reset the hinge post with a deeper concrete footing, welded a reinforced steel frame, and fit heavy-duty rollers so the gate tracked clean again without tearing up the post. That’s the kind of Bedford job we do every week.
If your Bedford gate is sagging, dragging, or won’t latch, call (817) 241-4067. A live person answers, day or night. We’ll set a time that works for you, show up in the window we promised, and give you a written quote before any work begins. Hal Gatewood has been at this since 2001, and his name is on the shop and on every invoice. That means something in Bedford. Call (817) 241-4067 for a free estimate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford since 2001.