Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in Arlington, TX
Hinge and post repair in Arlington typically ranges from $250 to $650, depending on whether you need a simple hinge adjustment or a full post reset due to shifting soil. We perform most repairs on-site, usually completing the work in a single visit, so you aren’t left with an open, insecure entry for days. If your gate is dragging, making a grinding noise, or failing to latch, the problem almost always starts at the hinge or the post it is mounted to. At Gatewood Fence & Gate, I have been providing gate repair since 2001, and my goal is to repair the existing structure rather than trying to sell you on a costly, unnecessary replacement.
You can reach us at (817) 241-4067 to schedule an assessment. We are locally owned and owner-operated, meaning when you call, you get a live person, not a call center. We stand behind every job with our 90-Day Done Right Promise, which is provided in writing on every invoice.
If you are struggling with a gate that won’t close or a post that has pulled away from the stone or brick, it is rarely just a minor inconvenience. It is a security risk. A gate that doesn’t latch is an open invitation, and that is why we prioritize these calls. Whether you are dealing with a heavy-duty steel gate or a standard residential model, we have the tools and the experience to handle it. You can learn more about our broader Gate Repair in Arlington services if your issue involves the motor or the access control system.
Why Arlington Gates Sag and Fail
Arlington has a unique geography that creates specific challenges for gate posts. The soil in this area, often characterized by high clay content, expands and contracts significantly with our seasonal rainfall and heat. This movement is the primary reason posts shift, tilt, or sink. When the post moves even an inch, the geometry of the gate changes. The hinge, which is designed to hold the gate at a precise angle, suddenly has to support the weight at an awkward tilt.
Most companies will tell you that once a post shifts, you have to dig it out and pour new concrete. While that is sometimes necessary, it is not always the case. I have spent decades looking at these failures, and often, the fix involves weld & rust repair, re-welding the hinges, or adjusting the mounting points to compensate for the ground movement. We fix the gate in your driveway. We do not believe in hauling your gate off to a shop unless it is absolutely unavoidable. Keeping the work on-site saves you time and keeps the cost fair.
When You Need Hinge & Post Repair
You do not need to wait for the gate to fall off entirely to call for help. In fact, catching these symptoms early usually keeps the repair bill on the lower end of our range. Look for these specific signs that your hinge or post is failing:
- Dragging or Scraping: If your gate leaves a crescent-shaped scar on the driveway or pavement, the hinges are failing to support the weight of the panel. This is often the first sign that the post is leaning.
- Gaps at the Latch: If your gate used to close perfectly but now hits the strike plate too high or too low, the post has likely shifted. The gate is physically in a different position than it was when it was installed.
- Visible Cracks in Concrete: If you see spiderweb cracks radiating from the base of your gate post, the concrete footer is being stressed by the weight of the gate. This often happens after heavy rain when the soil around the footer softens.
- Grinding Noises: If you hear metal-on-metal noise when the gate swings, the hinge bearings are likely shot or the gate is binding against the hinge pin. This puts excessive strain on your gate motor, such as a LiftMaster or Viking unit, which can lead to expensive motor repairs if left unaddressed.
- Wobble at the Post: If you can push the top of the gate and see the post move or flex, the structural integrity of the mounting is compromised. This is dangerous and needs immediate attention.
Our Hinge & Post Repair Process
My approach to repair is simple: I fix what is broken, and I don’t touch what works. You will find that my process is transparent, and I am happy to show you exactly what I am doing while I am on-site. We are certified to service nine major brands, including FAAC, BFT, and Linear, so we understand how the mechanics should interact with the post.
- Initial Assessment: We arrive at your property and check the vertical alignment of the post with a level. I check the welds for hairline fractures that might be invisible to the naked eye.
- Weight Distribution Check: We determine if the gate panel itself has warped or if the failure is strictly at the hinge-to-post connection. We identify if the post is sinking or simply leaning.
- On-Site Welding or Reinforcement: If the hinge has pulled away from the steel post, we weld it back into place using industrial-grade equipment right in your driveway. We do not use “band-aid” fixes like epoxy or temporary brackets.
- Hinge Adjustment or Replacement: If the hinge bearings are seized or worn out, we replace them with high-quality components. We use greaseable hinges where possible to ensure longevity in the Texas heat.
- Final Alignment: We adjust the gate so it closes smoothly, ensuring the latch engages without resistance. We test the swing to make sure there is no binding.
- Quality Verification: I personally check the work against our 90-Day Done Right Promise. If it isn’t moving exactly like it should, I adjust it until it is.
Hinge & Post Repair Pricing in Arlington
I believe in upfront pricing. You shouldn’t have to guess what a repair will cost, and I don’t believe in “trip charges” if you are inside the county. We offer a permanent 10% discount for seniors and veterans, and we take $40 off any repair over $200. If you have a written estimate from another company, I will give you a free second opinion. Please call (817) 241-4067 for an exact quote based on your specific gate.
| Repair Type | Estimated Price Range |
|---|---|
| Hinge Adjustment & Lubrication | $150 – $250 |
| On-Site Welding (Hinge/Bracket) | $250 – $450 |
| Post Reinforcement/Bracing | $350 – $650 |
| Hinge Replacement (Per Pair) | $300 – $550 |
These ranges cover labor and standard materials. If your post requires a full reset in concrete or extensive fabrication, I will provide a clear, written estimate before we start. There are no surprise fees at the door.
Safety First: The Risks of DIY Gate Repair
I understand the desire to fix things yourself, but I need to be clear about the danger involved with gate hinges and posts. A gate panel can weigh several hundred pounds. When a hinge fails, that weight is no longer controlled. If you attempt to remove a hinge or unbolt a post without properly bracing the gate, the entire panel can collapse. This is not just a risk to your property; it is a serious risk of injury.
If you see a post leaning or a hinge pulling away, keep people and pets away from the gate. Do not try to prop it up with a piece of wood or a temporary brace. Call a professional who has the right equipment to secure the load before work begins. My crew and I are trained to handle the weight and the tension safely. It is not worth the risk to your safety to attempt this repair without the proper gear.
FAQs - Hinge & Post Repair
How do I know if my gate post needs to be replaced or just repaired?
In most cases, we can reinforce or re-weld a post unless the steel itself has rusted through at the base or the concrete foundation has completely crumbled. If the post is structurally sound but just leaning due to soil movement, we can often reset or brace it without a full replacement. Call (817) 241-4067 and I can take a look at it to tell you for sure.
Can you weld a hinge back on if it has ripped off the metal post?
Yes, on-site welding is one of our primary services. We bring our welding equipment to your property and re-attach the hinge, often adding extra bracing to ensure the connection is stronger than it was originally. This is significantly faster and more cost-effective than replacing the entire gate post.
Is it cheaper to repair the hinge or replace the entire gate?
Lock repair, hinge work, and post fixes are almost always cheaper than replacing the gate. We are a repair-first company, and my goal is to extend the life of your existing gate. Unless the gate panel itself is falling apart or the motor is completely dead, a repair is usually the smart financial choice.
How quickly can you come out to fix a dragging gate?
We answer our phones 24/7 with a live person, so we can get your request into our schedule immediately. We prioritize automatic gate repair and other urgent fixes that affect the security of your property, so if your gate is stuck open or creating a safety hazard, let us know, and we will do our best to get to you as quickly as possible.
If you are ready to get your gate working properly, call us at (817) 241-4067. I will be happy to provide a free estimate and get your gate swinging the way it should.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Arlington.