Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Euless
When a gate stops opening, starts dragging, or hangs loose on a broken hinge in Euless, you need someone who can get it working again without a week of back-and-forth. Most gate parts and welding calls in Euless run $180-$450 for repairs like hinge replacement, post resets, roller swaps, and on-site bracket fabrication, and we quote that price before any work begins. Our Gate Parts & Welding crew works the neighborhoods along Highway 183, Main Street, and the side streets off Harwood Road every week, so we know the gate failures this city deals with. Call (817) 241-4067 and you’ll get Hal or someone who works directly with him, not a phone tree.
Why Gatewood Fence & Gate Is Euless’s Preferred Gate Parts & Welding Company
Hal Gatewood started this company in 2001, and his name is still on the shop and on every invoice. That matters in Euless, where a lot of the gate work is on aging apartment complexes along the 183 corridor and on 1970s-1990s tract homes off Mid-Cities Boulevard, and property managers want a face they’ll see again. We show up when we say we will, we weld on site in your driveway or parking lot, and the 90-Day Done Right Promise is stamped in writing on every job we do. If something isn’t right, one call brings us back.
Euless customers keep our phone ringing because we repair before we replace. A leaning post gets reset and re-anchored. A torn hinge gets a welded gusset plate instead of a whole new gate. A flat roller gets swapped before it eats the track. And when you call, a live person answers, 24/7. No voicemail, no answering service three states away. Hal publishes his shop address and license number for anyone to look up. That’s the kind of accountability people around here expect.
Our Gate Parts & Welding Services in Euless
Hinge Replacement
Hinge replacement in Euless runs $120-$280 per hinge depending on gate weight and whether we’re working steel or wood framing. The Blackland Prairie clay under most Euless yards swells hard when it rains, and that shifts the post just enough to rip hinge welds or wallow out screw holes. We cut out the old hinge, weld or bolt a new one, and shim the gate back to level. On shared driveways off Pipeline Road and Fuller-Wiser Road, we keep the gate swinging while we work so residents still get in and out.
Post Replacement
A sagging gate usually starts at the hinge post, not in the middle of the frame. Euless’s expansive clay soil torques posts out of plumb every wet-dry cycle, especially after a dry spell breaks and the ground soaks up a few inches of rain in a week. We dig out the old footing, reset the post in fresh concrete, and weld the hinge side back true. Post replacement typically costs $350-$750 in Euless, including concrete and clean-up, and we stage from the street when the gate sits in a narrow shared right of way.
Rail Repair
Sliding gates live and die by their rail. The apartment complexes along the Highway 183 and Airport Freeway corridor run slide gates 50-plus cycles a day, and the rack and pinion wear smooth over a decade or two. We weld new rack sections, repair cracked steel rails, and true buckled runners. Rail repair runs $250-$550 on a typical Euless slide gate. When the rail is gone, we fabricate a replacement section on site so the gate stays in place and the residents keep moving.
Custom Welding
Some gates weren’t built for the job they’re being asked to do. We weld custom brackets, gusset plates, hinge reinforcements, frame patches, and complete replacement gate frames in Euless driveways and parking lots every month. If a swing gate won’t fit because the driveway is too short or the right-of-way is too narrow, we can build the hardware for a slide conversion. Custom welding starts around $150 for small brackets and runs up from there. Every weld is done by Hal’s crew, on site, with the gate still attached when possible. You get the price before the torch comes out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Euless
We stock and service parts for the operators you actually see on Euless gates. LiftMaster units on the newer single-family installs, FAAC operators on the 1980s-era apartment slide gates, Elite and Mighty Mule on residential swing openers. When a safety photocell dies on a FAAC slide gate off Highway 183, we don’t have to order from a catalog and make you wait a week. We keep common rollers, hinges, rack sections, photo-eyes, and control boards in the truck and at the shop. If we need something unusual, Hal can usually have it the next day. And we service all nine major brands without trying to upsell you to a brand we’d rather sell.
Common Gate Parts & Welding Problems We See in Euless Homes
- Slide gate rack and pinion wear on 183-corridor apartments. Those original operators from the DFW construction boom were spec’d for light-duty use and have been running nonstop for decades. By the time we’re called, the rack is nearly smooth and the motor is fighting itself.
- Swing gate posts torqued out of plumb by the clay. Tarrant County’s Blackland Prairie soil shrinks hard in drought and swells in rain, and every cycle pries the post a little further out of true. The gate starts binding at the latch, and the hinges start to rip. Hinge swaps alone won’t hold if the footing is moving.
- Flat gate rollers on old slide gates. A roller that’s worn flat drags the gate across the rail and overloads the motor. By the time you hear the grinding, the rail is usually chewed up too. We replace the rollers and dress the rail in the same visit.
- Failed safety photocells on multi-family gates. Dead photo-eyes mean a gate that reverses on nothing, or worse, doesn’t stop when it should. On shared drives in Euless, we replace and realign photo-eyes so the gate still stops for a child on a bike or a car edging in behind.
Pricing for Gate Parts & Welding in Euless, TX
Here’s what Euless property owners typically pay with us. Hinge replacement: $120-$280 per hinge. Post replacement with new concrete footing: $350-$750. Rail repair or rack section replacement: $250-$550. Custom welding and bracket fabrication: $150 and up depending on size and materials. Roller replacement with rail dressing: $90-$220 per roller. A full operator replacement on an aging apartment slide gate usually lands between $1,400 and $2,800 including installation, depending on the gate’s weight, length, and access. We quote the job before we start, and that’s the price. No trip charge inside the county. We offer $40 off any repair over $200, a free second opinion on any written estimate, and a permanent 10% discount for seniors and veterans. Call (817) 241-4067 for a free estimate.
We Also Serve Cities Near Euless
We work all over the Mid-Cities. If you’re in Bedford, Colleyville, Hurst, or Grand Prairie, we handle gate parts and welding there too. And for anything bigger than a hinge or bracket, our Gate Parts & Welding in Euless page covers the full local service area, what we see in this soil, and how we work around tight shared driveways without shutting anyone out.
Serving Euless, TX - Our Local Coverage Area
We’re based in the Euless area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Euless
Because the original slide and swing gate operators installed along the Highway 183 corridor in the 1980s and 1990s were built for light-duty use and have been cycling 50-plus times a day for three or four decades. By the time we open one up, the motor is usually burned out, the rack is worn smooth, and the safety photocells are dead. Rebuilding all three costs more than a new operator, so replacement is the honest call. We still quote both ways, and you decide. Call (817) 241-4067 for a straight answer on your gate.
In most Euless yards, yes. We dig around the footing, brace the gate in place, and reset the post in fresh concrete while the panels stay attached. The Blackland Prairie clay makes this a recurring job here, and we’ve done it hundreds of times. Post resets run $350-$750. A post that’s rotted at ground level or snapped at the footing usually does need the gate pulled, but we’ll tell you before we dig.
We do, and it’s common in Euless because so many driveways and shared rights of way are too short for a swing gate to open without hitting a car or a fence. We install the track, set the posts, hang the gate, and mount the operator. Slide gate installations typically start around $1,600 and go up with gate weight, length, and operator type. We’ll measure it, quote it, and you’ll have the number before any work starts.
We chock and brace the gate, weld in sections, and work around the traffic pattern. On apartment slide gates, we’ll open the gate fully and lock it out while we weld, then test the cycle after the weld cools. On residential swing gates, the gate stays hung and we work around it. We don’t haul your gate off to a shop and leave you with a hole in the fence. That’s the whole point of on-site welding.
We stock and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Euless specifically, we keep extra FAAC and LiftMaster parts on the truck because those are the two brands we see most on the 183-corridor apartment gates and the newer single-family installs off Harwood Road. If we don’t have it, we can usually get it next day. Call (817) 241-4067 and tell us what’s on the gate.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Euless since the beginning and standing behind every weld.