Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Access Control Across Everman
Gate access control in Everman usually means one of two things: a keypad or phone entry system that lets you and your family in without a remote, or a slide gate operator that has finally given up under a load it was never built to carry. We handle both. In Everman, where lots are tight and gates are often 16 to 20 feet across opening onto shared driveways, we set up systems that survive Texas heat and heavy work trucks. If you’re in Everman and the gate won’t open, or you want keypad entry without wrestling an app, call (817) 241-4067 and a live person will answer.
Why Gatewood Fence & Gate Is Everman’s Preferred Gate Access Control Company
We’re not a national outfit that sends someone from three counties over with a price sheet and a script. The person who shows up in Everman is the same person whose name is on the invoice: Hal Gatewood. He has been repairing and installing gates since 2001, and he’s seen every brand of access control fail in every weather condition North Texas can throw at it. Everman customers call us back because we answer the phone at midnight and show up when we said we would.
What builds trust in a small city like Everman isn’t a billboard. It’s the neighbor on Coldwater Creek Drive who watched us reset a post footing at 4 p.m. and had their gate moving again before dinner. It’s the 90-Day Done Right Promise we put in writing on every job, whether it’s a keypad replacement or a full slide gate conversion. And it’s the fact that you can drive to the shop and look Hal in the eye if you ever want to see who actually stands behind the work. We also offer a free second opinion on any written estimate because we’d rather earn the job than pressure you into it.
Our Gate Access Control Services in Everman
Keypad Entry
Keypad entry in Everman is the most common request we get from homeowners with work trucks. You want the family to have a code, the crew to have a code, and nobody to be fishing for a remote in a glove box at 6 a.m. We install hardwired and wireless keypads that can handle multiple user codes, and we recommend models rated for the Texas sun. An exposed keypad on a west-facing Everman gate will cook through a cheap membrane in two summers. We install ones that don’t.
Phone Entry
Phone entry is a good fit for Everman’s shared driveways and multi-vehicle households. The system calls a phone or several phones when someone presses the call button, and you can open the gate from wherever you are. This matters when both the family car and the plumbing van park on the same driveway. You set up schedules, you get open alerts, and you don’t need everyone in the house to carry a separate remote. We wire phone entry into existing operators from LiftMaster, FAAC, Linear, BFT, and Viking, and we test the call flow before we leave.
Video Intercom
Video intercoms give Everman homeowners a live look at who’s at the gate before letting them in. That’s not paranoia; that’s just knowing the difference between a delivery truck and someone casing a work trailer. We install video intercom panels that integrate with your phone entry system, so you see the person, talk to them, and open the gate from one app. On lots where the house sits 60 feet from the gate line, a wired video intercom is more reliable than anything wireless.
Card Reader
For homeowners and small operators in Everman who want simple access without codes, card readers are a clean fix. Tap a card or fob, gate opens, no keypad to wear out. We see card readers used on side pedestrian gates that get heavy daily use, and on driveway gates where a contractor needs to give crews temporary access without sharing the family code. Card readers also hold up better than keypads in direct sun, which on an Everman summer day is a real consideration.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Everman
We service all nine major gate brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Everman specifically, we see a lot of Linear and BFT operators on older work properties, and Ghost Controls on newer slide gates. Because we carry common parts on the truck and weld on site, most access control fixes in Everman are done in one visit. We don’t send your control board off to some depot and tell you to wait a week for your gate to work again.
Common Gate Access Control Problems We See in Everman Homes
- Thermal overload trips on oversized slide gates. A 16-foot double gate on a 1/2 HP residential operator is the single most common failure we fix in Everman. The motor gets hot, the overload trips, and the gate stops at the worst possible time. Replacing the motor with another 1/2 HP motor doesn’t fix it; the gate needs an operator rated for the panel weight and the daily cycle count.
- Hinge post fatigue from expansive black clay. Tarrant County clay swells and shrinks all year, and in Everman it’s worse in areas with older fill dirt. Posts heave and tilt, the gate drags, and the operator strips the rack and pinion fighting the misalignment. You fix the post, not just the gear.
- Photocells and loop detectors failing in summer heat. Everman regularly hits 105°F, and wiring insulation and rubber seals break down fast. Photocells misalign from post movement, loop detectors fry from ground heat, and the gate thinks there’s an obstruction when there isn’t. We replace heat-rated components and re-sink loops below the frost line.
- Remotes that work intermittently after 2 p.m. When the sun cooks an antenna or the receiver board on an older operator, you get remotes that work in the morning cool and quit in the afternoon heat. It’s usually not the remote. It’s the receiver, and we diagnose it on the spot instead of selling you four new remotes.
Pricing for Gate Access Control in Everman, TX
Keypad entry installation in Everman typically runs $180 to $420 depending on whether it’s a standalone wireless unit or wired into an existing operator. Phone entry systems run $450 to $950 installed. Video intercoms start around $600 and go up to $1,400 for wired panels with multi-phone integration. Card readers are the simplest: $250 to $500 for most residential setups. The price we quote is the price you pay, agreed before any work starts. Call (817) 241-4067 for an exact quote, and remember we give a free second opinion on any written estimate. Seniors and veterans get a permanent 10% discount, and any repair over $200 takes $40 off.
We Also Serve Cities Near Everman
While this page is written for Everman, our crews also run calls to Everman‘s neighboring cities including Arlington, Fort Worth, Colleyville, and Irving. If you’re in one of those towns or just outside Everman along Enon Avenue or Shelby Road, the same owner-operated crew and the same 90-Day Done Right Promise apply. You can learn more about our full Gate Access Control services across the metro.
Serving Everman, TX - Our Local Coverage Area
We’re based in the Everman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Access Control in Everman
Because the motor was never the problem. Most thermal overload trips in Everman happen when a 16 to 20 foot steel gate is running on a residential operator rated for a lighter panel and lighter use. A new motor of the same size will just trip again. You need an operator sized for the actual gate weight and cycle count. Call (817) 241-4067 and we’ll tell you in plain terms what rating you need. Don’t throw another motor at it.
Yes, and that’s the most practical setup for Everman lots where a swing gate would hit a trailer or a parked truck. We install slide gates on compacted gravel, on concrete runners, and on existing drive supports. The key is setting the post footings right the first time, because Everman’s black clay heaves and a shallow footing will tilt a slide gate within a year. We set posts below the seasonal movement line and weld the rack and pinion so the gate stays true. Estimates are free.
Texas requires automatic gates to have at least two independent methods of entrapment protection: typically a primary safety device like photocells and a secondary device like reverse-on-contact sensing. On work-properties in Everman where the gate cycles dozens of times a day with trucks and equipment moving through, we strongly recommend loop detectors on both sides plus photocells, even though code doesn’t always force the loops on a single-family lot. A gate that crushes a trailer tongue or a person is not worth the shortcut.
The hinges look fine because the hinges aren’t what’s failing. Everman’s expansive black clay swells with spring rain, and the gate post moves. When the post tilts even a few degrees, a 12-foot swing gate drops half an inch at the latch end, and the operator starts dragging the gate through the arc instead of swinging it clean. We fix the post, not the hinge. Anything else and you’ll be calling us back next spring.
Yes. Phone entry systems let you program multiple numbers and multiple schedules, so the same call button can ring your phone for the family car during the day and the crew phone when the van is coming and going. You can also set time windows for different users. Call (817) 241-4067 and we’ll map out exactly how your driveway actually gets used before we recommend a system. No charge for the conversation.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Everman since 2001.