Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Bedford
Gate motor and opener work in Bedford usually comes down to one of three jobs: a slide motor that has been beaten up by alley traffic, a swing arm that has torn loose from a post heaved by clay soil, or a full opener replacement on a 40-year-old cedar gate. We handle all three, and we are usually at your house the same day you call. Hal Gatewood has been fixing gates since 2001, and Gatewood Fence & Gate is the local shop that repairs what other companies want to replace. Call (817) 241-4067 and a live person answers, any hour.
Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Motor & Opener Company
Bedford is a fully built-out Mid-Cities suburb. Most of the residential gates here were hung between the late 1960s and mid-1980s, and they sit on Blackland Prairie clay that heaves and contracts with every wet-dry cycle North Texas throws at them. A gate that worked fine in April will bind and scrape by August. We know that. Hal and his crew have pulled scores of tired LiftMaster and FAAC operators off Bedford gates, and we fix the post and the footing rather than bolting a new motor onto a foundation that is still shifting. For problems beyond repair, we also handle Gate Installation in Bedford with proper foundations built to last.
Bedford homeowners tend to call us after a national outfit has quoted one number on the phone and tried to charge another at the door. That is not how we work. The price you get is the price we agree on before any work starts, and every job carries our 90-Day Done Right Promise in writing. If it is not done right, we make it right. One call brings Hal back. No runaround.
We also answer the phone 24/7. Not a voicemail, not a dispatch queue, not a chatbot. A person.
Our Gate Motor & Opener Services in Bedford
Motor Installation
Full motor installation in Bedford typically runs $850 to $1,600 for a complete operator, depending on gate length, weight, and whether we are adding battery backup or intercom wiring. We measure, order the right opener for the gate’s actual size and cycle count, and install it plumb on a post that will stay put. Most installs are finished the same day once the opener is on hand.
Motor Repair
Most Bedford repair calls are for motors that still run but no longer move the gate. The arm bracket has torn loose from an aging hinge post, or the rack and pinion teeth have stripped, or a loop detector has failed. We diagnose on site, weld what needs welding, and reuse what still works through our Gate Repair in Bedford service. A straightforward motor repair in Bedford usually lands between $140 and $420. We quote the number before we turn a wrench.
Linear Motor
Linear arm motors are the most common style on Bedford’s swing gates, especially in brick ranch neighborhoods like Stonegate and Woodbine. The original posts these arms mount to are often 40 to 50 years old and have been heaved off plumb by expanding clay. We set a proper footing when the post has moved, then hang the linear motor so it travels true. A replacement linear arm and bracket here generally runs $400 to $750 installed.
Slide Motor
Slide gate operators are serious work in Bedford, because so many of these gates sit in rear utility alleys and take abuse from garbage trucks. Standard residential slide motors fail within a season in that application. We fit heavy-duty slide motors with rack and pinion hardware rated for commercial impact. A slide motor replacement for an alley gate in Bedford typically runs $1,100 to $2,000, and it is worth every dollar when the alternative is replacing the whole rack a year from now.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We service and install LiftMaster, FAAC, Elite, Mighty Mule, and the rest of the major Gate Motor & Opener brands, and we keep common parts in stock so Bedford customers are not waiting on a two-week backorder. If you already have an opener and just need it working again, we service all nine brands we are certified on. Brand loyalty does not matter to us; a gate that opens does.
Common Gate Motor & Opener Problems We See in Bedford Homes
- Stripped rack and pinion on alley gates. Garbage trucks and utility vehicles rattle the gate every collection day. Standard residential rack and pinion teeth shear under the vibration, and the motor spins without moving the gate. Bedford back alleys need commercial-rated hardware or this repeats annually.
- Operator arms torn loose from heaved posts. Blackland Prairie clay expands in spring rains and contracts in summer drought. Posts lean, the gate goes out of square, and the motor arm bracket rips off the post face. The motor runs, the gate does not move, and the fix starts in the footing, not on the motor.
- Loop detector false-triggers. Shared driveways and rear alleys here often have loop detectors that fail after wet-dry cycles crack the saw-cut sealant and expose the wire. The gate opens for no reason, or refuses to open at all. We re-cut, reseal, and retune the loop rather than masking it with sensitivity adjustments.
- No battery backup on gates that guard the only way in. Bedford gets strong spring storms, and a power outage at 3 a.m. means the gate is stuck shut. A battery backup sized to the motor’s duty cycle is the difference between sleeping in and a tow charge. We size them to the gate, not to the price point.
Pricing for Gate Motor & Opener in Bedford, TX
Bedford gate motor and opener work falls into predictable ranges. Motor repair: $140 to $420. Linear arm replacement: $400 to $750. Full operator installation: $850 to $1,600. Heavy-duty slide motor for an alley gate: $1,100 to $2,000. Battery backup add-on: $250 to $600. Intercom integration: $350 to $900, depending on wiring runs. The price is set and agreed before any work begins, and every job carries the 90-Day Done Right Promise in writing. Estimates are free inside the county. We also have standing offers that never involve haggling: $40 off any repair over $200, a permanent 10% discount for seniors and veterans, and a free second opinion on any written estimate from another company. Call (817) 241-4067 for an exact number.
Bedford’s Rear Alley Gates Demand Hardware Most Suburbs Never Need
Here is the thing most gate opener pages will not tell you, because most of those pages are written by someone who has never stood in a Bedford alley. Bedford’s older interior neighborhoods were built with rear utility alleys, and the gates on those alleys live inches from the path of garbage trucks and utility vehicles. Every collection day, a metal truck body passes within a foot of the gate, shaking the post, the rack, the motor housing. It is not a one-time hit. It is a weekly beating, year after year.
Standard residential slide motors and hinges do not survive that. We see it constantly: a homeowner buys a mid-grade slide opener, and nine months later the rack teeth are gone and the motor has fried itself pushing a gate that was never going to move true. In Bedford, the correct fix is a heavy-duty slide motor with rack and pinion rated for commercial impact, mounted on a post with a deeper footing than the original 1972 concrete. Newer suburbs like Southlake barely generate this demand, because Southlake has almost no alleys. Bedford does, and we spec the work accordingly.
We replaced a corroded LiftMaster slide operator on a back-alley gate in the Woodbine neighborhood off Shady Lane a while back. Years of alley traffic had sheared the original rack and pinion teeth clean. Our tech poured a new post footing for the gate post, installed a heavy-duty linear motor with battery backup, and added safety photocells. That gate now opens smoothly without drifting out of square, and the homeowner has not called us back for that gate since. That is the point.
We Also Serve Cities Near Bedford
If you live just outside Bedford, we serve Gate Motor & Opener in Bedford and the surrounding Mid-Cities as well: Colleyville, Euless, Hurst, and North Richland Hills. Same local crew, same 90-Day Done Right Promise, same live answer on the phone. Dispatch and scheduling run through our Dallas-Fort Worth office, but the person who shows up at your gate works and lives in this area.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Bedford
Because your gate sits along a rear utility alley and standard residential slide motors are not built for garbage-truck vibration. The weekly rattling shears rack teeth and forces the motor to strain. The fix is a heavy-duty, commercial-rated rack and pinion system with a properly grouted post footing. We see this pattern all over Bedford’s older alleys. Call (817) 241-4067 and we will look at the rating on what is currently installed before you buy anything else.
Usually no, because Bedford’s tighter shared driveways and rear-alley approaches do not have the setback a swing gate arm needs. A slide gate or a compact linear-arm arrangement is typically the practical answer. We measure the actual clearances before recommending anything, and the number we quote is what you pay. Free estimate, no trip charge inside the county.
We dig the post out, pour a larger footing with proper drainage, and set the post plumb with mechanical anchors, which is the only way a gate on Blackland Prairie clay stays square through the wet-dry cycle. For gates needing more than post work, we also stock Bedford Gate Parts & Welding supplies on every truck. Bolting a motor onto a leaning post just moves the problem downstream. We have been doing this in Bedford’s 1960s and 1970s neighborhoods long enough to know which posts will keep moving and when a repair is better than a replacement.
Yes, especially in Bedford, where spring thunderstorms knock power out often enough that a gate without battery backup will trap you or leave your driveway unsecured at the worst time. We size the backup to the motor’s actual duty cycle, so the gate opens and closes normally through an outage. A battery backup add-on runs $250 to $600.
Yes. Most Bedford gates from the 1970s and 1980s predate intercoms, but we can integrate a wired or wireless intercom with the operator you already have, usually for $350 to $900 depending on the wiring run from house to gate. We run the wire, program the handset, and show you how to use it before we leave. Call (817) 241-4067 for a quote.
Call Gatewood Fence & Gate for Gate Motor & Opener Work in Bedford
If your Bedford gate will not open, will not close, or is making a sound you do not like, call (817) 241-4067. A live person answers. We will give you a straight price, set a window we actually keep, and the person who shows up will be Hal or someone Hal trained. Every job carries the 90-Day Done Right Promise. The name is on the shop, and the shop is local. That is the oldest accountability there is.
Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford and the Mid-Cities since 2001.