Gate Repair in Bedford - Same-Day Repair, Priced Before We Start

Fast, Reliable Gate Repair Across Bedford

Most gate repairs in Bedford come down to one thing: the clay under your posts. Blackland Prairie soil expands when it rains and shrinks when it dries, and that cycle heaves hinge posts out of plumb on gates that were installed back when Bedford was still filling in. We fix that. Gatewood Fence & Gate has been repairing gates in Bedford long enough to know exactly which neighborhoods fight post lean the hardest, and we carry the hardware to fix it right the first time. Call (817) 241-4067 and you’ll get a live person, not a voicemail tree.

A gate that won’t close isn’t just annoying. It’s a hole in your fence line, a risk to a dog or a grandkid, and a security gap on a property that should be buttoned up. We get that. Hal Gatewood started this shop in 2001, and his name is on every invoice. If a repair doesn’t hold, you call and he comes back. That’s the 90-Day Done Right Promise, in writing, on every job we do in Bedford.

Why Gatewood Fence & Gate Is Bedford’s Preferred Gate Repair Company

We’re local in a way the national outfits can’t fake. Bedford’s streets, its alleys, its 1970s brick ranches with cedar privacy gates, that’s our daily route. When a customer in the Shady Oaks area calls about a gate dragging on the concrete, we already know the likely cause before we pull up: clay heave on the hinge post, original galvanized hardware rusted through, maybe a garbage truck clipped the latch side last spring.

Hal answers his own phone around the clock. Not a call center. Not a chatbot. You get the guy whose name is on the truck. And his crew, background-checked and uniformed, does the work in your driveway, not in some shop across town. We don’t haul your gate off unless it’s truly beyond saving. Most of the time we weld on site, straighten what’s bent, set new posts where the clay moved them, and hang the gate back square before we leave.

Bedford customers tell us the same thing: they got burned before by a company that quoted cheap on the phone and padded the invoice at the door. Our price is quoted before we start, and it doesn’t change unless you add work. Written estimate, upfront price, no trip charge inside Tarrant County. That’s how we’ve kept our reputation in Bedford for years. See what your neighbors say about Gate Repair done by a shop that actually stands behind it.

Our Gate Repair Services in Bedford

Electric Gate Repair

Electric gate openers on Bedford’s older ranch homes are often FAAC or Linear units installed fifteen or twenty years ago. The circuit boards hold up, but the limit switches and safety sensors start acting up after years of North Texas heat and spring thunderstorms. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule openers. If your gate opens halfway and stops, or the remote works only when you’re three feet away, call us at (817) 241-4067.

Automatic Gate Repair

Automatic gates in Bedford fail most often at the hinge side, not the motor. A gate that’s out of square puts extra strain on the opener arm until something gives. We align the gate first, then tune the opener. On Shady Creek Drive, we rebuilt a cedar swing gate that had sagged so badly it dragged across the concrete apron. The original hinge post had heaved a full inch out of plumb from the Blackland clay. We cut back the soil, set a new 6×6 post with deep concrete footings, hung a LiftMaster LA400 gate operator, and reinstalled the latch with proper alignment. The gate now clears by a half-inch and the keypad entry works first time.

Hinge & Post Repair

This is the bread and butter of gate repair in Bedford. The original galvanized hinges and latches on 40-year-old cedar gates have corroded and seized. Posts lean from clay heave. Lag screws pull out of aged wood. We set posts in concrete footings deep enough to resist the seasonal movement, and we use heavy-duty hinges rated for more than a standard residential gate. Especially on rear alley gates, which we’ll get to in a minute. Fix the panel without the post and you’ll fix it twice.

Gate Realignment

A gate that was square in March won’t be square in August. The clay under Bedford expands with spring rain and contracts in summer drought, moving the posts a little every year. We realign the gate frame, adjust the hinges, and reset the latch so the gate closes cleanly and stays latched. Show us the gate closing on its own and we’ll show you where it’s failing. Most realignment jobs in Bedford are done same day, and the price is set before we touch a wrench.

Trusted Brands We Service in Bedford

We’re certified to service nine major gate brands, and stock common parts for FAAC, Linear, and Viking openers so Bedford customers aren’t waiting a week for a board to ship from California. When a LiftMaster operator on a Brown Trail property fails, we usually have the replacement part on the truck. On-site welding means we can fabricate brackets and hinge plates that the manufacturer no longer makes, which matters on older Bedford gates where OEM parts have been discontinued for years.

Common Gate Repair Problems We See in Bedford Homes

• Post lean from Blackland Prairie clay. The wet-dry cycle under Bedford heaves and tilts hinge posts, throwing the gate out of square. We set posts in concrete that goes below the active clay layer.
• Rear alley gates hit by garbage trucks. Bedford’s older neighborhoods were built with rear utility alleys, and those gates take repeated impacts from collection vehicles. Standard residential hinges fail within a season. We install heavy-duty commercial-style hardware that holds up.
• Corroded and seized original hardware. Gates built in the 1970s and 1980s on Bedford’s brick ranch and split-level homes still carry original galvanized hinges and latches. They rust shut, break, or pull free from the wood.
• Automatic openers straining against misaligned gates. The opener burns out because it’s fighting a gate that’s out of square. We align the gate before we replace or repair the opener, otherwise you’ll replace the opener twice.

Pricing for Gate Repair in Bedford, TX

We Also Serve Cities Near Bedford

While Bedford keeps us busy, we also run calls throughout the Mid-Cities: Colleyville, Euless, Hurst, and North Richland Hills. If you’re in one of those towns and your gate is sagging or seized, Gate Repair in Bedford coverage extends to your driveway, too. Same live person answers, same pricing, same promise.

FAQs - Gate Repair in Bedford

Why does my Bedford gate post keep leaning even after a repair?

Because the post wasn’t set deep enough the first time. Bedford sits on expansive Blackland Prairie clay that swells when wet and contracts when dry. A post set in shallow concrete or resting in the clay will heave and tilt seasonally. We dig footings below the active clay zone and set posts in concrete that resists that movement. If your post has been fixed once and leaned again, call (817) 241-4067 and we’ll look at the footing depth before doing anything else. Estimates are free.

Can you repair a back-alley gate that garbage trucks keep hitting?

Yes. This is one of the most common calls we get in Bedford’s older neighborhoods with rear utility alleys. Garbage trucks and utility vehicles clip those gates and bend hinges, pull lag screws out of aged wood, and knock latches out of alignment. We replace standard hardware with heavy-duty hinges rated well above residential spec, and reinforce the hinge montant so it takes the next hit without the gate sagging. Call us for a free estimate.

My sliding gate in Bedford works fine but makes a grinding noise. What’s wrong?

Grinding on a sliding gate usually means the roller bearings are worn or the track has shifted out of alignment. Bedford’s clay movement can shift the track just enough to make the gate ride hard on one side. We replace the rollers or straighten the track, and the gate runs quiet again. If it’s an older gate with original steel wheels, we often upgrade to sealed bearing rollers that don’t need grease. Call (817) 241-4067 and we’ll take a look.

Do you work on automatic gate openers from the 1980s on Bedford ranch homes?

We do. A lot of Bedford’s ranch and split-level homes still have their original openers, usually FAAC or older Linear units. We stock parts for those systems, and when a specific board is long discontinued, we can often rebuild or substitute a modern opener that fits the existing gate without replacing the whole setup. We won’t sell you an opener you don’t need. Let us check the gate alignment and the opener together. Free estimates.

How do you fix a gate that won’t close all the way after rain in Bedford?

Rain saturates the Blackland clay under your gate posts, and the ground swells enough to shift the post just enough that the latch misses or the gate frame binds. The fix is usually a realignment and a latch adjustment, plus making sure the post footings are deep enough that the movement stops being a problem. The first step is to get it closing so it’s secure, and the estimate for that is free. Call (817) 241-4067.

Call Gatewood Fence & Gate for Gate Repair in Bedford

When your gate is dragging, stuck open, or hanging crooked after a hard rain, call (817) 241-4067. You’ll get Hal or one of his crew on the phone, not a recorded message. We’ll give you a straight answer, a written price, and a time window we’ll actually keep. Serving Bedford and the surrounding cities with owner-operated honesty since 2001. The name is on the shop, and the shop is down the road, that’s the oldest accountability there is.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, serving Bedford since 2001.