Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Richland Hills
If you’re in North Richland Hills and your gate is sagging, dragging, or won’t close square, the fix usually comes down to two things: the right parts and a welder who knows this soil. Most gate failures in North Richland Hills aren’t mysterious. Hinges wear out, posts heave in the clay, welds crack at stress points, and rollers flatten from years of heat and weight. Our Gate Parts & Welding team handles all of it on site, in your driveway, without hauling your gate to some shop across the metroplex. Hal Gatewood has been at this since 2001, and he still answers the phone himself. Call (817) 241-4067 and you’ll get a live person, not a queue.
We know this city’s rhythm. In North Richland Hills, gate problems follow the calendar. Spring rain swells the black clay and shoves posts out of line. August heat shrinks that same clay and the gate that closed fine in April is now dragging by two inches. We schedule for that. And when you call, the person who shows up is someone whose name you can verify, with a shop address that’s published and a license number you can look up. That’s how Hal’s run Gatewood Fence & Gate for over two decades.
Why Gatewood Fence & Gate Is North Richland Hills’s Preferred Gate Parts & Welding Company
North Richland Hills homeowners don’t need another fly-by-night crew. They need someone who’ll be here next year when the clay shifts again. Hal Gatewood’s name is on the shop and on every invoice. He’s been locally owned and owner-operated since 2001, and his crew doesn’t rotate through some national dispatch board. When you call about a gate hinge in NRH, you’re talking to the company that will actually do the work.
We carry the hardware North Richland Hills gates actually need. That means heavy-gauge weld-on hinges for cedar privacy gates in the older subdivisions off Rufe Snow and Holiday Lane, and it means replacement rollers and tracks for the ornamental steel driveway gates going into the newer HOA communities along the northern edge of the city. We stock parts locally so a hinge replacement doesn’t turn into a two-week wait.
The 90-Day Done Right Promise comes in writing on every job. If something isn’t right, one call brings Hal back. No runaround, no “we’ll send someone out next Tuesday.” And every call is answered by a live person, 24/7. Not a voicemail. Not a chatbot. The person who picks up can actually talk to you about your gate.
We also offer things that shouldn’t be rare but are: a free second opinion on any written estimate from another company, no trip charge inside the county, $40 off any repair over $200, and a permanent 10% discount for seniors and veterans. No haggling. That’s the price, stated up front, before any work starts.
Our Gate Parts & Welding Services in North Richland Hills
Here’s what we actually do when North Richland Hills homeowners call us about gate parts and welding. The work happens on site. Your gate stays in your driveway.
Hinge Replacement
Hinges on North Richland Hills gates take a beating. The combination of heavy cedar pickets on older wood gates and the constant post movement from shrink-swell clay means hinge screws strip, hinge barrels oval out, and the gate starts dragging. We replace them with weld-on or heavy bolt-on hinges rated for the weight of your gate, not whatever was cheapest at the big box store. In neighborhoods like Smithfield and the central subdivisions along Mid-Cities Boulevard, a proper hinge replacement often means the gate swings clean again without touching the rest of the frame.
Post Replacement
This is the big one in North Richland Hills. The expansive black clay under this city heaves posts out of plumb every wet spring, then leaves them tipped when the ground contracts through summer drought. A gate sags in the hinge post, not the middle, and that’s where we start. Post replacement here means digging out the old footing, setting a new post below the active clay zone, and welding the original hardware back to true. Fix the panel without the post and you’ll fix it twice. We’d rather do it once.
Rail Repair
Rails on older NRH wood gates rot where they meet the stile, especially on the bottom rail where splashback from North Texas thunderstorms keeps the wood damp. We cut out the rotted section and weld in new steel bracing or replace the rail entirely, depending on what the gate frame will support. For ornamental steel gates, rail repair usually means straightening a bent rail or welding a crack that’s started at a stress point near the hinge.
Custom Welding
Some gates need more than a part swap. When a hinge tears out of a steel frame, or a homeowner wants to add a pedestrian cut-through to an existing driveway gate, or an HOA-approved design calls for a specific bracket, we weld on site. Hal packs a mobile welder so the gate never leaves your property. Custom welding in North Richland Hills often means matching the finish on an existing ornamental gate so the repair disappears into the original work. We do a lot of this in the newer HOA communities off Davis Boulevard and Iron Horse Boulevard, where architectural committees notice everything.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
We’re certified to service nine major gate brands, and on this side of town we see a lot of LiftMaster and Elite operators on the newer HOA driveway gates, plus plenty of Mighty Mule units on ranch-style properties along the city’s northern edge. We keep common replacement parts for these systems on the truck, so a failed hinge bracket or a worn gear doesn’t mean waiting on a freight shipment. North Richland Hills homeowners call, we show up with the parts, and the gate works again. That’s the whole idea.
Common Gate Parts & Welding Problems We See in North Richland Hills Homes
- Post heave from the black clay. The soil under North Richland Hills expands after every spring rain event and contracts hard through the summer dry spell. Gates that close cleanly in April are binding on the ground by July. This is the single most common call we take in this city, and it’s a structural fix, not a hinge adjustment.
- Worn weld-on hinges on 30-to-50-year-old cedar gates. Most of this city’s housing stock was built between the late 1960s and mid-1990s, which means the original wood privacy gates are at or past their service life. The hinges are usually the first failure point, followed closely by the hinge post itself.
- HOA architectural compliance issues. North Richland Hills has a dense concentration of HOA communities. When we do welding or post replacement on a gate that the committee can see from the street, the finish and hardware style have to match the original or the committee will flag it. We know how to do the work so it passes the first time.
- Freeze-damaged hardware and electronics on automated gates. The February 2021 hard freeze is still showing up as delayed failures on gate operator control boards across NRH. Boards that got moisture-cycled during Uri can work for months, then fail on the next cold snap. If your opener is acting up, we check the board before we start swapping motors.
Pricing for Gate Parts & Welding in North Richland Hills, TX
Here’s honest pricing for North Richland Hills, stated up front. A hinge replacement on a typical cedar swing gate in NRH runs $85-$180 for labor plus parts, depending on how much of the old hardware has to be ground off. Post replacement runs $220-$450 per post, including the new footing set below the active clay zone and welding the original hardware back to true. Rail repair is usually $120-$300 depending on whether we’re splicing in new steel or replacing the rail entirely. Custom welding jobs start around $95 for a straightforward bracket or gusset and go up from there based on materials and time. Every price is quoted and agreed before any work starts. No trip charge inside the county. Estimates are free.
For an exact quote on your gate in North Richland Hills, call (817) 241-4067. Hal will talk you through what you actually need, not what’s easiest to sell.
We Also Serve Cities Near North Richland Hills
If you’re just outside the NRH city line, we handle gate parts and welding in Hurst, Haltom City, Bedford, and Colleyville too. Same live-answer phone, same 90-Day Done Right Promise, same crew that works across North Richland Hills every week.
Key Takeaways for North Richland Hills Homeowners
- The black clay soil under North Richland Hills heaves gate posts out of plumb every spring and locks them out of true through summer drought. This is a structural issue, not a hinge issue, and it repeats on an annual cycle.
- August and September are the most reliable months for post-straightening work, after the clay has fully contracted and revealed which posts have drifted the furthest.
- HOA communities across NRH, especially the newer ornamental steel driveway gates along the northern edge of the city, have architectural committees that review gate materials, finishes, and hardware. We handle the approval-sensitive work.
- We weld on site. Your gate stays in your driveway. Hal carries the welder on the truck and does the work himself or supervises the person who does.
- Every job carries the 90-Day Done Right Promise in writing, and every price is quoted before work begins. No surprises at the door.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Richland Hills
In most North Richland Hills HOA communities, yes, especially if the gate faces the street or a common area. Architectural committees here routinely review any work that changes the appearance, finish, or hardware style of a gate. If you’re replacing hinges with a visibly different style or welding a frame that changes the gate’s look, get the approval first. We can tell you what the committee typically flags and do the work so it passes the first time. Call (817) 241-4067 and we’ll walk you through what your specific HOA is likely to require.
Because the clay under your posts is shrinking. North Richland Hills sits on expansive black clay that swells with spring rain and contracts hard through July and August. Your gate wasn’t adjusted wrong in the spring. The ground moved underneath it. The reliable fix is resetting the hinge post below the active clay zone, not shimming the hinge. We schedule post-straightening work in August and September for exactly this reason.
Yes. If your slide gate’s rack teeth are worn down to nubs but the gate frame itself is still sound, we can weld a new rack section to the existing gate on site. The work is done in your driveway with the gate in place, matched to your existing operator’s gear pitch. No need to replace the whole gate when the rack is the only worn part. That’s the repair-first approach we’ve been using since 2001.
That’s almost always a loop detector or junction box that’s gotten moisture into it, and in North Richland Hills the expanding clay makes it worse by shifting the saw-cut loop just enough to throw off the signal. We trace the circuit, find the fault, and repair or replace the component without replacing the whole operator. For shared entry gates in HOA communities, we coordinate with the management company on scheduling and access so residents aren’t locked out while the work happens.
Most North Richland Hills HOA committees expect a finish that matches the original gate or the neighborhood standard. For ornamental steel, that usually means a smooth grind on the weld, a primer coat, and a finish coat in black or bronze powder coat or matched paint. Unfinished welds that rust within a year are the quickest way to get flagged. We match the finish on the existing gate so the repair blends in, and we can tell you before we start whether the work will meet your committee’s written standard.
Your gate is the first thing you see when you come home and the last thing protecting your yard at night. In North Richland Hills, where the ground moves under everything, it needs someone who understands the soil as well as the steel. That’s what we do. Call (817) 241-4067 and talk to Hal directly about what your gate needs. Free estimates, straight answers, and a 90-Day Done Right Promise on every job. The name is on the shop, and the shop is down the road.
Written by Hal Gatewood, owner of Gatewood Fence & Gate, providing gate parts and welding in North Richland Hills since 2001.