Gate Repair Services in Bedford - Same-Day Repair, Priced Before We Start

The Gate That ‘Squared Itself Up’ Next Door

Hal got the call at 7:15 on a Tuesday morning. The woman on the phone said her gate had “kind of fixed itself” overnight and she wasn’t sure if that was good news or bad news. Hal knows that trick. The Blackland Prairie clay under Bedford does strange things when it dries out after a rain, and a gate that suddenly latches cleanly in August is usually a gate that’s about to drop hard come October. He drove out to a brick ranch off Harwood Road, found the hinge post twisted a full inch out of plumb, and welded a new bracket on in the driveway while she watched from the porch. No hauling the gate away, no “this one’s shot, time for a new one” speech, no surprise line item at the end. That’s the job, and what makes Bedford different is how often the job starts with soil movement, not steel failure.

Gate Repair Services in Bedford, TX

We’re Gatewood Fence & Gate, and we repair gates in Bedford the way we’d repair a neighbor’s gate: in the driveway, with welding done on-site, at a price you approve before the first cut. Hal Gatewood started this shop in 2001, and his name is still on the door and on every invoice. When you call (817) 241-4067, a real person answers, any hour, any day. No voicemail maze, no “your call is very important to us” recording, no third-party dispatch. If your cedar gate in Bedford is sagging, dragging, or swinging loose in the wind, you’ll talk to someone who has fixed that exact problem in this exact soil. We serve Bedford with same-day availability on repairs, and we don’t charge a trip fee anywhere inside the county.

Why Bedford Homeowners Choose Gatewood Fence & Gate

Most of the calls we take from Bedford start the same way: a homeowner tells us about the last company, what they quoted on the phone, what they charged at the door, and how many times the gate broke again after they left. By the time they call us, they’re not shopping price. They’re looking for a name they can check, someone who will show up in the window they promised, and work that lasts longer than one rainy season. We get that. Hal has lived and worked in this part of North Texas his whole career. His crew is background-checked and uniformed. The shop publishes its address and license number, and Hal will tell you to come by and look him in the eye if that’s what it takes to feel good about the job.

Bedford homeowners also stick with us because of a piece of paper we hand them before we leave: the 90-Day Done Right Promise. It says, in plain writing, that if it’s not done right, we make it right. One call brings Hal back. No runaround, no arguing about whether the repair failed or the weather did it. If it’s not right, it’s on us. We serve Bedford neighborhoods like the tree-lined streets around Harris Hospital and the mid-century tracts off Forest Ridge Drive, and our work in those neighborhoods is backed by the same promise every time.

Gate Repair Services We Offer in Bedford

Gate Repair

Sagging gates, seized hinges, latches that won’t catch, posts leaning out of plumb, gates dragging on the concrete, frames going out of square, rusted-through hardware, pickup truck damage to back gates: we’ve seen every version of it in Bedford, and most of it can be fixed without replacing the gate. Welding is done in your driveway by us, not shipped to a shop, and the gate stays on your property the whole time. Learn more about our Gate Repair in Bedford.

Gate Installation

When a gate has finally reached the end of its life, or when you’re adding a new gate to a property, we measure, order, and build to fit the actual opening, not to a catalog guess. New gates in Bedford go on posts set deep enough to survive the clay, with concrete footings sized for the soil’s wet-dry cycle and hinges rated for the gate’s weight. Learn more about our Gate Installation in Bedford.

Gate Motor & Opener

When your gate opener hums but won’t move the gate, or groans like it’s dying, or opens but won’t close, the cause is usually one of three things: dead capacitor, stripped gear, or a misaligned safety edge. We service motors and openers from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we’ll tell you honestly whether your opener deserves a rebuild or a replacement. Learn more about our Gate Motor & Opener in Bedford.

Gate Access Control

Keypads, remotes, intercoms, vehicle detectors, loop systems, and smartphone-based openers all need someone who understands both the wiring and the gate itself. We install and service access control on Bedford gates and make sure the electronics don’t fight the mechanicals.

Gate Parts & Welding

Sometimes the hinge is fine but the bracket is cracked. Sometimes the latch is fine but the strike is in the wrong place. Sometimes the post is solid but the gate frame has fatigue from 40 years of cycle duty. We weld and fabricate parts on-site for Bedford repairs that other companies would write off as a full replacement, and we stock the common hardware so we don’t have to put you off for a week waiting on a part.

Neighborhoods We Serve in Bedford

We work all over Bedford, but here is where you’ll see us most often: the established mid-century blocks near L. Don Dodson Drive, the tree-shaded streets around Forest Ridge Drive and Bedford Boys Ranch, the homes east of Cheek-Sparger Road, the areas near Harwood Road and the rail line, and the neighborhoods surrounding Central Drive. Typical response for a gate repair in Bedford is same day when you call before early afternoon, and next morning the rest of the time.

• Areas near L. Don Dodson Drive and Bedford Boys Ranch
• Neighborhoods around Forest Ridge Drive and the Shady Brook area
• Streets east of Cheek-Sparger Road off Harwood
• Properties near Central Drive and Bedford’s civic center

Why Bedford’s Climate & Housing Affect Gate Repair

Bedford is a fully built-out Mid-Cities suburb, landlocked by Hurst, Euless, and North Richland Hills, and nearly all of its residential housing dates from the 1960s through the mid-1980s. That matters for gate repair more than people expect. Most of the gates we see in Bedford are 40 to 50 years old, built from cedar, hung on original galvanized hardware that has seized or rusted through, and set into posts that have been worked over by decades of North Texas weather. The original hinge screws won’t turn. The post pickets are split at the bolt line. The latch strike is an eighth-inch off where it used to be. None of that is the homeowner’s fault, and none of it means the gate is dead. It means the gate has been living in Bedford for a long time, and someone needs to know how to work on old wood and pitted steel without making it worse.

Then there’s the soil. Bedford sits on Blackland Prairie clay, which is a whole different animal from the sandy loam you find north and west of here. When the spring rains come, that clay swells and pushes. When the summer drought bakes it, it shrinks and pulls away. A hinge post is a lever in the middle of all that movement, and every wet-dry cycle works it loose a little more. We routinely see Bedford gates that were hung square in April and are dragging by August, not because anyone did wrong by them, but because the earth under the post doesn’t stay where you put it. Good gate repair in Bedford always starts with the post: plumb it, stabilize the footing, set the concrete correctly for the clay, and only then square the gate to the post. In neighborhoods like the ones around Harwood and Central Drive, where the original posts went in shallow in the 1970s, that post-first approach is the difference between a repair that lasts a season and one that lasts a decade. Fix the panel without the post and you’ll fix it twice, and a lot of Bedford homeowners have already paid for that lesson once.

There’s another Bedford factor that outsiders don’t know about: the alley gates. Many of Bedford’s older interior blocks were built with rear utility alleys, and the back gates on those properties take a beating no front gate ever sees. Garbage trucks swing wide. Utility crews lean equipment against them. The hinges get slammed by wind every time a truck rolls through and creates a pressure wave. We’ve pulled hardware off Bedford alley gates that looked like it came out of a truck graveyard, and the fix is always the same: heavy-duty hinges rated well above residential standard, properly spaced, on a post that’s set deep. Standard residential hardware fails within a season in that application, and the big-box hinge sets don’t say that on the package. It’s knowledge you only get from working Bedford block by block, year by year.

Pricing for Gate Repair in Bedford

Service Area - Cities Near Bedford

We work all around Bedford, and our service area includes the neighboring communities of Colleyville, Euless, Hurst, and North Richland Hills. Scheduling is coordinated from our Dallas-Fort Worth office, with local crews serving Bedford directly. If you’re next door to Bedford and need the same straight talk, call us.

FAQs About Gate Repair in Bedford

How much does gate repair cost in Bedford?

Most Bedford gate repairs run between $150 and $600, depending on whether the issue is a hinge and latch or a full post that needs resetting in concrete. We quote a fixed price before any work starts, charge no trip fee inside the county, and offer $40 off any repair over $200. Call (817) 241-4067 and describe what the gate is doing; we’ll give you a realistic range before we ever roll a truck.

Can you come out today to fix my gate in Bedford?

Yes, when you call before early afternoon, we can usually have someone in Bedford the same day. After that, we schedule for the next morning. Either way, you’ll talk to a person when you call, not a queue. If the gate is open and won’t close, or closed and blocking your only way out, tell the person who answers and we’ll prioritize it.

Why does my Bedford gate go out of square every year, even after a repair?

The Blackland Prairie clay under Bedford expands and contracts with rain and drought, and that movement heaves and tilts the hinge post repeatedly. If the repair only addressed the gate panel and not the post footing, you’ll be re-squaring the gate every season. In Bedford, the real repair starts with the post, and if you’re paying someone who skips that step, you’re going to pay them again next spring. Call us and we’ll show you the difference, or for more on how we handle this in Bedford specifically, see our Bedford gate repair page.

Do you weld on-site, or does my gate have to be taken to a shop?

We weld in your driveway, in Bedford, with the gate still on the property. Hal does the welding himself on most jobs, and the repair happens where the gate hangs. You can watch it happen, ask questions in real time, and see exactly what was done and why. No gate leaves the property, and no part gets swapped unless it actually needs swapping.

What if the repair fails a month from now?

Then you call the same number, the same person answers, and Hal comes back. Our 90-Day Done Right Promise is in writing on every job: if it’s not done right, we make it right. No arguing, no “that’s normal wear,” no bill for a second visit. We work from home, we live near you, and the name on our shop is the name on your invoice. The promise matters because his reputation is on the line with yours.

Call Gatewood Fence & Gate for Gate Repair in Bedford

If your Bedford gate is sagging, dragging, seized, or swinging on one hinge, call (817) 241-4067. You’ll get a person, not a recording. We’ll give you an honest answer, a free estimate, and a fixed price before any work begins. No trip charge inside the county. No surprises at the door. Just a gate that works, a post that stays put, and a promise in writing for 90 days. Hal Gatewood’s name is on the shop, the shop has a published address and license number, and he’s been doing this same work since 2001. You can start by calling, or you can head back to our home page to see everything we do.

Written by Hal Gatewood, Owner at Gatewood Fence & Gate, repairing gates in Bedford since 2001.